Results 1 to 7 of 7
Thread: Wiring USBoutput card
-
12-27-2011, 03:03 PM #1
- Join Date
- Jan 2009
- Location
- Belgium
- Posts
- 61
Wiring USBoutput card
Hi,
I just want to make sure that I'm doing this the right way.
If connected ext 5V to J9. Jmp 2 closed jmp 1 open.
LED connection = between pos of J8 and one of the 64 of J2 ( the leds works ) but,
Question: do i still need to connect a ext power to J8 or not?
Thanks and,
regards,
henri
-
12-27-2011, 05:09 PM #2
- Join Date
- Jul 2013
- Posts
- 917
Re: Wiring USBoutput card
Here you are
http://www.lekseecon.nl/iocards.html#USBOutputs
David
-
12-27-2011, 06:18 PM #3
- Join Date
- Jan 2009
- Location
- Belgium
- Posts
- 61
Re: Wiring USBoutput card
ThX david,
I have that info. But it says something about a common 5+ volt. And I used phidgets before were you have only a USB connection and the power supply ( my case 5+ V) for the leds.
Any way thx.
henri
-
12-28-2011, 04:37 AM #4
- Join Date
- Nov 2010
- Location
- Copenhagen
- Posts
- 80
Re: Wiring USBoutput card
Hi Henri
I have done it another way, you can see it in the iFly2FSUIPC tutorial on this page:
http://www.737sim.dk/page6.html
Regards
Claus
-
12-28-2011, 06:23 AM #5
- Join Date
- Jan 2009
- Location
- Belgium
- Posts
- 61
Re: Wiring USBoutput card
THX a lot,
and a very very nice site. it was help full.
regards,
Henri
-
12-28-2011, 06:50 AM #6
- Join Date
- Jul 2013
- Posts
- 917
Re: Wiring USBoutput card
That is nothing to do with how you apply power - the diagram is correct. Nico is just warning everyone that the Mastercards have a common - (ground) whereas the USB output card has a common + (positive) ie the leds need to be connected with their negative lead to the 64 individual screw connectors on the card (the opposite to the mastercard outputs!!!)
David
-
12-28-2011, 08:35 AM #7
- Join Date
- Jan 2009
- Location
- Belgium
- Posts
- 61
Re: Wiring USBoutput card
Hi David,
I know that, because i also use phidgets cards. I was just having doubts about where to apply power J9 or J9 and J8. I thought i needed to apply power to the card(J9) and separately apply power for the LEDs(J. Thats all
Thnx and regards,
henri
Looking for fun companions for travels and adventures? Authentic Ladies Premier Сasual Dating
Top-notch Сasual Dating -...