Page 1 of 2 12 LastLast
Results 1 to 10 of 18
  1. #1
    75+ Posting Member PeterH's Avatar
    Join Date
    Dec 2006
    Location
    EDDM
    Posts
    148
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Looking for "Below GS" and "Spoilers armed" annunciator light offset

    Hi,

    anyone out there who knows the offsets for (B737) "Below GS" , "Stab out of trim" and "Spoilers armed" lights?

    Any hint highly appreciated.

    Thanks and best rgds


    Peter

  2. #2
    75+ Posting Member
    Join Date
    Nov 2005
    Location
    IJmuiden, Netherlands
    Posts
    86
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    offset 04FE length 2 PFD Various (Read Only)
    Bit 0 Windshear
    1 Below G/S
    2 Caution
    3 Warning
    6 Eight Mode ND Active
    7 Seatbelt Sign
    8 No Smoking Sign
    9 Weather Radar (Captain)
    10 EGPWS/Terrain (Captain)
    11 TCAS Active (Captain)

    13 TCAS WARNING
    14 TCAS ALERT

    http://www.projectmagenta.com/pmoffsets.html

    This is one of the special offsets within fsuipc reserved for PM. I do not know for sure whether you would need the PM software to use it. I think the PM software somehow looks via this offset into FS to see whether the plane is below GS or not. Then you could read this offset with other software too.

    You could use fsinterrogate (see the dowson page on www.schiratti.com) and down the sdk package. Then fly an approach under the GS and look with fsinterrogate into 04Fe.

    Post your result here please.

  3. #3
    1000+ Poster - Fantastic Contributor Bob Reed's Avatar
    Join Date
    Oct 2005
    Location
    Holley, New York U.S.A.
    Posts
    1,776
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    If this is a PM only offset, it will not work without PM. Yes FSUIPC will read the data for the offset but it has nothing to pass the offset to.
    Bob Reed

  4. #4
    150+ Forum Groupie
    Join Date
    Dec 2006
    Location
    Ireland
    Posts
    255
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Quote Originally Posted by npbosch View Post
    offset 04FE length 2 PFD Various (Read Only)

    Post your result here please.
    Offset 04FE does nothing without a running PFD because the Offset is a PM Offset. That means only PFD writes to this OFFset and not FS or anything else.
    Regards
    Thomas

  5. #5
    300+ Forum Addict
    Join Date
    Jan 2007
    Posts
    496
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Quote Originally Posted by PeterH View Post
    anyone out there who knows the offsets for (B737) "Below GS" , "Stab out of trim" and "Spoilers armed" lights?
    Not sure about lights, but as documented in the FSUIPC SDK, the spoiler arm flag in FS (with or without PM) is at 0BCC. There's no easy flag for "below G/S". The FS G/S needle position is in the 1 signed byte offset 0C49, ranging from -127 "up" to +127 "down". I think the up and down refer to the needle position, not the aircraft, so a +ve number would mean you are below the GS. But for a warning you'd want to allow a little leeway.

    Regards

    Pete

  6. #6
    75+ Posting Member PeterH's Avatar
    Join Date
    Dec 2006
    Location
    EDDM
    Posts
    148
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Hi,

    meanwhile found an offset for "Below GS" under 4FE Bit 1.
    There磗 also "Master warning" and "Caution" Bits 2 and 3.
    I磎 a bit confused about that Master Warning (or is it Fire warn?) and Master caution as there are other offsets for this as well. So which ones are the ones to use for the Master warning Push button and its light and for the Master Caution push button and its light? In the sysvar there are different offsets for example the caution switch (56F3.1 and 56F8.0).

    Currently I磎 desperately trying to get my sixpacks working, but to no avail I can figure out a logic in its behaviour. Once I reload the PMsystem I can get e.g. the Flt Ctrl light to come up by switching off the Yaw damper on the 737 overhead. This works until I push the recall switch or the Master caution. Then APU, Elec, Eng and FLTCtrl as well as HYD, Anti Ice, Doors get illuminated and will not go off even on the overhead everything seems to be ok. Also the Master Warning is lit (56F8.0) and can磘 be cancelled.

    Tried besides the stock 737 Pmsystems file different other logic files as given here in this forum, but all behave the same illogical way. Can someone please explain the difference between offset 5530 /5531 and the offsets 5540 / 5541 as they both could be read by my sixpack Led HW. Which ones are the right ones for the sixpack lights and which ones are the right offsets for the master warning (red), master caution (yellow) and the recall push button (operated by pushing in the sixpack)?

    What am I doing wrong here?

    Any hints highly appreciated.

    Thanks a lot in advance

    Best rgds


    Peter

  7. #7
    150+ Forum Groupie luisgordo's Avatar
    Join Date
    Jan 2007
    Location
    Houston, TX
    Posts
    275
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Any answer to this last question?

    Do the Master Warning and Master Caution lights/switches work within PM (maybe only for boeing, but not for airbus?).

    What about the BelowG/S offset?

    And to complete the thing, any OFFSET for turning on a LED for GPWS warnings? I think I found one, but didn't seem to work...

    Thanks!
    Luis Gordo
    Instructor StationTM - www.iStationGordo.com

  8. #8
    150+ Forum Groupie
    Join Date
    Dec 2006
    Location
    Ireland
    Posts
    255
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Quote Originally Posted by luisgordo View Post
    Any answer to this last question?

    Do the Master Warning and Master Caution lights/switches work within PM (maybe only for boeing, but not for airbus?).
    This controlled by pmSystems logic and pmMCP.

    What about the BelowG/S offset?
    Just use the Offset, it works!

    And to complete the thing, any OFFSET for turning on a LED for GPWS warnings? I think I found one, but didn't seem to work...
    Thanks!
    Because there is no logic that controls this Offset, it cannot work.
    Regards
    Thomas

  9. #9
    150+ Forum Groupie luisgordo's Avatar
    Join Date
    Jan 2007
    Location
    Houston, TX
    Posts
    275
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Thomas, can you give me any guidelines for writing logics in pmSystems? I am already familiar with several programming languages, and would like to write several things for pmSystems A320 logics, including the GPWS, the Master Warning and Master Caution.
    Thanks!
    Luis Gordo
    Instructor StationTM - www.iStationGordo.com

  10. #10
    150+ Forum Groupie
    Join Date
    Dec 2006
    Location
    Ireland
    Posts
    255
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Quote Originally Posted by luisgordo View Post
    Thomas, can you give me any guidelines for writing logics in pmSystems? I am already familiar with several programming languages,
    I don't what more is needed than this because the pmSystems language has simple syntax like a simple Basic language, any other is your own creativity.

    I don't know what I can tell more!?
    Regards
    Thomas

Page 1 of 2 12 LastLast

Similar Threads

  1. Real Flight Simulators versus PC "Games" - the eternal debate...
    By ryanf in forum Pilots Lounge - Let your Hair down
    Replies: 3
    Last Post: 01-01-2010, 06:32 PM
  2. Offset "Flags"
    By Daveanne in forum I/O Interfacing and Hardware
    Replies: 0
    Last Post: 12-31-2009, 07:13 PM
  3. Gwyn Perrett's Article "Creating a glass cockpit display"
    By Matt Olieman in forum General Builder Questions All Aircraft Types
    Replies: 0
    Last Post: 08-31-2007, 07:20 PM
  4. Cant assign "BELOW GLIDESCOPE" annunciator
    By lineman55 in forum FS2Phidget Users
    Replies: 20
    Last Post: 02-20-2005, 08:47 AM