Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16
  1. #11
    Tim
    Guest
    Hi Denis,

    My sim is on another computer so I will again try this from memory.

    In FSUIPC Buttons and Switches tab:

    Click rescan then press the button you want to assign. You should see it identified.

    On the right side of the box, place a check in the FS and PM boxes.

    In the drop down box, scroll down until you see the PM TCAS functions. Click on the one you want.

    Close the Buttons and Switches tab and see if you can control TCAS.


    Not all PM functions are in the drop down box. Pete Dowson added a drop down function called "Assign By Pram" or assign by parameter. There is a list of PM parameters on the PM documentation page.

    I'll look at this again when I can get a minute to turn on the sim. I hope this explanation can point you in the right direction.

  2. #12
    10+ Posting Member
    Join Date
    Feb 2007
    Location
    Strasbourg
    Posts
    22
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    This is my problem !

    Hi Tim,

    Thanks for your help. This IS my problem : assign by param : I don't find a way to have it working. The other ways are OK, but only a fiew of them are for PMRJ. I've tried a lot of things, but it never works, so I need help : where can i find an exemple of the offsets and params for PMRJ and PM systems.

    Best regards

    Denis

  3. #13
    Tim
    Guest
    Denis,

    Look in the FSUIPC Advanced User's Guide. The Guide should be in the folder where you installed FSUIPC.

    Here is a quote from Pete Dowson:

    " .... there's also already a special FSUIPC control, documented in the FSUIPC Advanced User's guide, called PM GC Controls (by param) .... "


    Take a look there and see if you can find what you need. If not, just keep asking. That's what this site is for.

  4. #14
    Tim
    Guest
    Denis,

    Look at page 27 of Advanced User's Guide.

    Here are the TCAS parameter numbers:


    50 TCAS Off
    51 TCAS Alt
    52 TCAS CallSign
    53 TCAS All
    54 Toggle TCAS Off/Alt


    One other note. I do not believe all the PM offsets or parameters are identified as specific to the RJ. Sometimes you just have to try one and see if it will work.

  5. Thanks Denis thanked for this post
  6. #15
    10+ Posting Member
    Join Date
    Feb 2007
    Location
    Strasbourg
    Posts
    22
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Fist progeesses

    I Tim,

    Thank you for your help, i can now use the PM GC Commands !

    But the PM GC Keys is still mysterious for me (and some functions are only available in that way.

    FSUIPC.INI shows that : 38=P175,22,C2996,0 and does nothing

    Have you any idea which way i could send a "T" value ?

    Best regards

    Denis

    Quote Originally Posted by Tim View Post
    Denis,

    Look at page 27 of Advanced User's Guide.

    Here are the TCAS parameter numbers:


    50 TCAS Off
    51 TCAS Alt
    52 TCAS CallSign
    53 TCAS All
    54 Toggle TCAS Off/Alt


    One other note. I do not believe all the PM offsets or parameters are identified as specific to the RJ. Sometimes you just have to try one and see if it will work.

  7. #16
    Tim
    Guest
    Hi Denis,

    Sorry for a late reply on your question.

    You have the Button assigned correctly. Your problem is you have not told it which key to send.

    38=P175,22,C2996,0 Change the 0 to 84, which is the parameter for the letter T.

    Look in the FSUIPC Advanced Documentation. I believe around page 25 or so, there is a section which list the parameters for Letters.

    Hope this helps.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Some PMRJ ideas for other builders-RMU display
    By Tomlin in forum Magenta Cockpits
    Replies: 2
    Last Post: 05-04-2008, 11:39 PM
  2. PMRJ Terrain Question
    By Kris Stow in forum PM General Q & A
    Replies: 9
    Last Post: 05-04-2008, 05:38 PM
  3. PMRJ Terrain display
    By Denis in forum Magenta Cockpits
    Replies: 0
    Last Post: 09-19-2007, 04:37 PM
  4. PMRJ, WhazzUp question
    By Elisio Cruz in forum PM General Q & A
    Replies: 1
    Last Post: 01-23-2006, 02:29 AM
  5. Re: No SA_WXR Tilt Display in pmRJ
    By Enrico Schiratti in forum PM General Q & A
    Replies: 0
    Last Post: 01-06-2005, 06:44 PM