Help needed................

[brianwilliamson]

Thanks Bob for all your help. I will sign off now but shall return tomorrow morn. nice and early.

Cheers.....Brian W

[Ray]

Good to know a man with priorities!!

Hope you shoot below 100!

Ray

[brianwilliamson]

Nice to see you here Ray. Well I was one over par after 7 holes then the wheel fell off. That's golf !!
Have just received the pdf file from Bob, which should help . Will be back on in the morning, and I hope you will be able to give me some pointers as well.

Cheers....Brian W

[Bob Reed]

Ok Brian. What I need to see now is the dir and file struture of your project directoery under EPIC. So I need to know what files are in the EPIC/projects/name(being the name of your project)

[brianwilliamson]

FIRST-Project.dat
FIRST-Project.dsk
FIRST-Project.dst
FIRST-Project.EP!
FIRST-Project.epj
FIRST-Project.epl
FIRST-Project.idx
FIRST-Project.joy

BrianW

[brianwilliamson]

/---------------------------------------------------------------------------
#include
#include
//---------------------------------------------------------------------------
#define FASTSCAN 0
#define SLOWSCAN 1
definemodule(1,slowscan,0,16)
definemodule(2,slowscan,0,16)
:INIT{setinterkey(1)}


:INIT
{
}
This as far as I got with the epl file. I know I jumped the gun !!!!
Brian W

[Bob Reed]

Ok now start EPIC Info and open your project (should do that automaticly) Open the FIRST-Project.epl file and (using copy and paste) show me what that says.. We need to get the files all setup to get started...

[Bob Reed]

Ok.. Howare you hooking up your switches?

[brianwilliamson]

At this stage one momentary switch on an Emda card which is Module one, row 0,databit 0
Brian W

[Bob Reed]

Do you have EPICInfo installed? This will be needed. You can get it here http://www.schiratti.com/dowson.html What switch would you like to start with?