Results 1 to 10 of 10
Thread: Expanded F6 Zoom
-
01-21-2006, 10:32 AM #1Enrico SchirattiGuest
Expanded F6 Zoom
Hi,
I added code that allows individual zooming of the PFD, ND
etc... thus the element you select by right-clicking on it
can be sized with the numeric keypad + and - keys.
http://www.projectmagenta.com/latest.html
I tried it in all sorts of configurations, and it was a bit
more complicated than I expected (spent tons of time on
it)... so if you find any problems, please let me know. I
just wish I would have considered the possibility 5 years
ago.
One thing is certain, it will *not* be possible to rotate
individual displays (i.e. PFD rotated but not ND) unless I
make a complete re-write.
Ciao
Enrico
-
01-21-2006, 06:27 PM #2Ray ProudfootGuest
Re: Expanded F6 Zoom
Hi Enrico,
Sounds great! Look forward to trying it out.
Many thanks
Ray.
"Enrico Schiratti" wrote in message
news:385206.77268@wb.onvix.com...
> Hi,
>
> I added code that allows individual zooming of the PFD, ND
> etc... thus the element you select by right-clicking on it
> can be sized with the numeric keypad + and - keys.
>
> http://www.projectmagenta.com/latest.html
>
> I tried it in all sorts of configurations, and it was a bit
> more complicated than I expected (spent tons of time on
> it)... so if you find any problems, please let me know. I
> just wish I would have considered the possibility 5 years
> ago.
>
> One thing is certain, it will *not* be possible to rotate
> individual displays (i.e. PFD rotated but not ND) unless I
> make a complete re-write.
>
> Ciao
>
> Enrico
>
-
01-21-2006, 06:59 PM #3Ray ProudfootGuest
Re: Expanded F6 Zoom
Hi Enrico,
Downloaded GC433p but I'm having problems with the F6 page. Despite having
Capt PFD, Capt ND, Upper and Lower EICAS checked nothing except the standby
instruments is displayed on the F6 page.
If I deselect LWR EICAS the standby instruments diappear and come back when
the box is checked again.
Hope you can help.
Cheers,
Ray.
"Enrico Schiratti" wrote in message
news:385206.77268@wb.onvix.com...
> Hi,
>
> I added code that allows individual zooming of the PFD, ND
> etc... thus the element you select by right-clicking on it
> can be sized with the numeric keypad + and - keys.
>
> http://www.projectmagenta.com/latest.html
>
> I tried it in all sorts of configurations, and it was a bit
> more complicated than I expected (spent tons of time on
> it)... so if you find any problems, please let me know. I
> just wish I would have considered the possibility 5 years
> ago.
>
> One thing is certain, it will *not* be possible to rotate
> individual displays (i.e. PFD rotated but not ND) unless I
> make a complete re-write.
>
> Ciao
>
> Enrico
>
-
01-22-2006, 04:38 AM #4Enrico SchirattiGuest
Re: Expanded F6 Zoom
Try clicking on "reset positions" in the menu or press
Shift-Control-R.
"Ray Proudfoot" wrote in
message news:385309.77268@wb.onvix.com...
> Hi Enrico,
>
> Downloaded GC433p but I'm having problems with the F6
> page. Despite having
> Capt PFD, Capt ND, Upper and Lower EICAS checked nothing
> except the standby
>
> instruments is displayed on the F6 page.
>
> If I deselect LWR EICAS the standby instruments diappear
> and come back when
>
> the box is checked again.
>
> Hope you can help.
>
> Cheers,
> Ray.
>
>
> "Enrico Schiratti" wrote in message
> news:385206.77268@wb.onvix.com...
>> Hi,
>>
>> I added code that allows individual zooming of the PFD,
>> ND
>> etc... thus the element you select by right-clicking on
>> it
>> can be sized with the numeric keypad + and - keys.
>>
>> http://www.projectmagenta.com/latest.html
>>
>> I tried it in all sorts of configurations, and it was a
>> bit
>> more complicated than I expected (spent tons of time on
>> it)... so if you find any problems, please let me know. I
>> just wish I would have considered the possibility 5 years
>> ago.
>>
>> One thing is certain, it will *not* be possible to rotate
>> individual displays (i.e. PFD rotated but not ND) unless
>> I
>> make a complete re-write.
>>
>> Ciao
>>
>> Enrico
>>
>
-
01-22-2006, 05:48 AM #5Ray ProudfootGuest
Re: Expanded F6 Zoom
Thanks Enrico, that did it!
Ciao,
Ray.
"Enrico Schiratti" wrote in message
news:385385.77268@wb.onvix.com...
> Try clicking on "reset positions" in the menu or press
> Shift-Control-R.
>
>
> "Ray Proudfoot" wrote in
> message news:385309.77268@wb.onvix.com...
>> Hi Enrico,
>>
>> Downloaded GC433p but I'm having problems with the F6
>> page. Despite having
>> Capt PFD, Capt ND, Upper and Lower EICAS checked nothing
>> except the standby
>>
>> instruments is displayed on the F6 page.
>>
>> If I deselect LWR EICAS the standby instruments diappear
>> and come back when
>>
>> the box is checked again.
>>
>> Hope you can help.
>>
>> Cheers,
>> Ray.
>>
>>
>> "Enrico Schiratti" wrote in message
>> news:385206.77268@wb.onvix.com...
>>> Hi,
>>>
>>> I added code that allows individual zooming of the PFD,
>>> ND
>>> etc... thus the element you select by right-clicking on
>>> it
>>> can be sized with the numeric keypad + and - keys.
>>>
>>> http://www.projectmagenta.com/latest.html
>>>
>>> I tried it in all sorts of configurations, and it was a
>>> bit
>>> more complicated than I expected (spent tons of time on
>>> it)... so if you find any problems, please let me know. I
>>> just wish I would have considered the possibility 5 years
>>> ago.
>>>
>>> One thing is certain, it will *not* be possible to rotate
>>> individual displays (i.e. PFD rotated but not ND) unless
>>> I
>>> make a complete re-write.
>>>
>>> Ciao
>>>
>>> Enrico
>>>
>>
>
-
01-22-2006, 05:51 AM #6Enrico SchirattiGuest
Re: Expanded F6 Zoom
You probably had pretty large zoom values in the pfdset.txt
file...
"Ray Proudfoot" wrote in
message news:385399.77268@wb.onvix.com...
> Thanks Enrico, that did it!
>
> Ciao,
> Ray.
>
>
> "Enrico Schiratti" wrote in message
> news:385385.77268@wb.onvix.com...
>> Try clicking on "reset positions" in the menu or press
>> Shift-Control-R.
>>
>>
>> "Ray Proudfoot" wrote in
>> message news:385309.77268@wb.onvix.com...
>>> Hi Enrico,
>>>
>>> Downloaded GC433p but I'm having problems with the F6
>>> page. Despite having
>>> Capt PFD, Capt ND, Upper and Lower EICAS checked nothing
>>> except the standby
>>>
>>> instruments is displayed on the F6 page.
>>>
>>> If I deselect LWR EICAS the standby instruments diappear
>>> and come back when
>>>
>>> the box is checked again.
>>>
>>> Hope you can help.
>>>
>>> Cheers,
>>> Ray.
>>>
>>>
>>> "Enrico Schiratti" wrote in message
>>> news:385206.77268@wb.onvix.com...
>>>> Hi,
>>>>
>>>> I added code that allows individual zooming of the PFD,
>>>> ND
>>>> etc... thus the element you select by right-clicking on
>>>> it
>>>> can be sized with the numeric keypad + and - keys.
>>>>
>>>> http://www.projectmagenta.com/latest.html
>>>>
>>>> I tried it in all sorts of configurations, and it was a
>>>> bit
>>>> more complicated than I expected (spent tons of time on
>>>> it)... so if you find any problems, please let me know.
>>>> I
>>>> just wish I would have considered the possibility 5
>>>> years
>>>> ago.
>>>>
>>>> One thing is certain, it will *not* be possible to
>>>> rotate
>>>> individual displays (i.e. PFD rotated but not ND)
>>>> unless
>>>> I
>>>> make a complete re-write.
>>>>
>>>> Ciao
>>>>
>>>> Enrico
>>>>
>>>
>>
>
-
01-22-2006, 08:41 AM #7Ray ProudfootGuest
Re: Expanded F6 Zoom
Probably. When I pressed C+S+R only the PFD was visible. Moved everything
left, resized and it's great
Satisfied customer
Cheers,
Ray.
"Enrico Schiratti" wrote in message
news:385400.77268@wb.onvix.com...
> You probably had pretty large zoom values in the pfdset.txt
> file...
>
> "Ray Proudfoot" wrote in
> message news:385399.77268@wb.onvix.com...
>> Thanks Enrico, that did it!
>>
>> Ciao,
>> Ray.
>>
>>
>> "Enrico Schiratti" wrote in message
>> news:385385.77268@wb.onvix.com...
>>> Try clicking on "reset positions" in the menu or press
>>> Shift-Control-R.
>>>
>>>
>>> "Ray Proudfoot" wrote in
>>> message news:385309.77268@wb.onvix.com...
>>>> Hi Enrico,
>>>>
>>>> Downloaded GC433p but I'm having problems with the F6
>>>> page. Despite having
>>>> Capt PFD, Capt ND, Upper and Lower EICAS checked nothing
>>>> except the standby
>>>>
>>>> instruments is displayed on the F6 page.
>>>>
>>>> If I deselect LWR EICAS the standby instruments diappear
>>>> and come back when
>>>>
>>>> the box is checked again.
>>>>
>>>> Hope you can help.
>>>>
>>>> Cheers,
>>>> Ray.
>>>>
>>>>
>>>> "Enrico Schiratti" wrote in message
>>>> news:385206.77268@wb.onvix.com...
>>>>> Hi,
>>>>>
>>>>> I added code that allows individual zooming of the PFD,
>>>>> ND
>>>>> etc... thus the element you select by right-clicking on
>>>>> it
>>>>> can be sized with the numeric keypad + and - keys.
>>>>>
>>>>> http://www.projectmagenta.com/latest.html
>>>>>
>>>>> I tried it in all sorts of configurations, and it was a
>>>>> bit
>>>>> more complicated than I expected (spent tons of time on
>>>>> it)... so if you find any problems, please let me know.
>>>>> I
>>>>> just wish I would have considered the possibility 5
>>>>> years
>>>>> ago.
>>>>>
>>>>> One thing is certain, it will *not* be possible to
>>>>> rotate
>>>>> individual displays (i.e. PFD rotated but not ND)
>>>>> unless
>>>>> I
>>>>> make a complete re-write.
>>>>>
>>>>> Ciao
>>>>>
>>>>> Enrico
>>>>>
>>>>
>>>
>>
>
-
01-22-2006, 09:36 AM #8Enrico SchirattiGuest
Re: Expanded F6 Zoom
> Probably. When I pressed C+S+R only the PFD was visible.
> Moved everything
> left, resized and it's great
>
> Satisfied customer
And a satisfied codemonkey here too then.
> "Enrico Schiratti" wrote in message
> news:385400.77268@wb.onvix.com...
>> You probably had pretty large zoom values in the
>> pfdset.txt
>> file...
>>
>> "Ray Proudfoot" wrote in
>> message news:385399.77268@wb.onvix.com...
>>> Thanks Enrico, that did it!
>>>
>>> Ciao,
>>> Ray.
>>>
>>>
>>> "Enrico Schiratti" wrote in message
>>> news:385385.77268@wb.onvix.com...
>>>> Try clicking on "reset positions" in the menu or press
>>>> Shift-Control-R.
>>>>
>>>>
>>>> "Ray Proudfoot" wrote in
>>>> message news:385309.77268@wb.onvix.com...
>>>>> Hi Enrico,
>>>>>
>>>>> Downloaded GC433p but I'm having problems with the F6
>>>>> page. Despite having
>>>>> Capt PFD, Capt ND, Upper and Lower EICAS checked
>>>>> nothing
>>>>> except the standby
>>>>>
>>>>> instruments is displayed on the F6 page.
>>>>>
>>>>> If I deselect LWR EICAS the standby instruments
>>>>> diappear
>>>>> and come back when
>>>>>
>>>>> the box is checked again.
>>>>>
>>>>> Hope you can help.
>>>>>
>>>>> Cheers,
>>>>> Ray.
>>>>>
>>>>>
>>>>> "Enrico Schiratti" wrote in message
>>>>> news:385206.77268@wb.onvix.com...
>>>>>> Hi,
>>>>>>
>>>>>> I added code that allows individual zooming of the
>>>>>> PFD,
>>>>>> ND
>>>>>> etc... thus the element you select by right-clicking
>>>>>> on
>>>>>> it
>>>>>> can be sized with the numeric keypad + and - keys.
>>>>>>
>>>>>> http://www.projectmagenta.com/latest.html
>>>>>>
>>>>>> I tried it in all sorts of configurations, and it was
>>>>>> a
>>>>>> bit
>>>>>> more complicated than I expected (spent tons of time
>>>>>> on
>>>>>> it)... so if you find any problems, please let me
>>>>>> know.
>>>>>> I
>>>>>> just wish I would have considered the possibility 5
>>>>>> years
>>>>>> ago.
>>>>>>
>>>>>> One thing is certain, it will *not* be possible to
>>>>>> rotate
>>>>>> individual displays (i.e. PFD rotated but not ND)
>>>>>> unless
>>>>>> I
>>>>>> make a complete re-write.
>>>>>>
>>>>>> Ciao
>>>>>>
>>>>>> Enrico
>>>>>>
>>>>>
>>>>
>>>
>>
>
-
01-22-2006, 10:07 AM #9Ray ProudfootGuest
Re: Expanded F6 Zoom
>
LOL! Make the most of it! Things never stay the same for too long Mr Sod
and his law will see to that.
"Enrico Schiratti" wrote in message
news:385427.77268@wb.onvix.com...
>> Probably. When I pressed C+S+R only the PFD was visible.
>> Moved everything
>> left, resized and it's great
>>
>> Satisfied customer
>
> And a satisfied codemonkey here too then.
>
>
>> "Enrico Schiratti" wrote in message
>> news:385400.77268@wb.onvix.com...
>>> You probably had pretty large zoom values in the
>>> pfdset.txt
>>> file...
>>>
>>> "Ray Proudfoot" wrote in
>>> message news:385399.77268@wb.onvix.com...
>>>> Thanks Enrico, that did it!
>>>>
>>>> Ciao,
>>>> Ray.
>>>>
>>>>
>>>> "Enrico Schiratti" wrote in message
>>>> news:385385.77268@wb.onvix.com...
>>>>> Try clicking on "reset positions" in the menu or press
>>>>> Shift-Control-R.
>>>>>
>>>>>
>>>>> "Ray Proudfoot" wrote in
>>>>> message news:385309.77268@wb.onvix.com...
>>>>>> Hi Enrico,
>>>>>>
>>>>>> Downloaded GC433p but I'm having problems with the F6
>>>>>> page. Despite having
>>>>>> Capt PFD, Capt ND, Upper and Lower EICAS checked
>>>>>> nothing
>>>>>> except the standby
>>>>>>
>>>>>> instruments is displayed on the F6 page.
>>>>>>
>>>>>> If I deselect LWR EICAS the standby instruments
>>>>>> diappear
>>>>>> and come back when
>>>>>>
>>>>>> the box is checked again.
>>>>>>
>>>>>> Hope you can help.
>>>>>>
>>>>>> Cheers,
>>>>>> Ray.
>>>>>>
>>>>>>
>>>>>> "Enrico Schiratti" wrote in message
>>>>>> news:385206.77268@wb.onvix.com...
>>>>>>> Hi,
>>>>>>>
>>>>>>> I added code that allows individual zooming of the
>>>>>>> PFD,
>>>>>>> ND
>>>>>>> etc... thus the element you select by right-clicking
>>>>>>> on
>>>>>>> it
>>>>>>> can be sized with the numeric keypad + and - keys.
>>>>>>>
>>>>>>> http://www.projectmagenta.com/latest.html
>>>>>>>
>>>>>>> I tried it in all sorts of configurations, and it was
>>>>>>> a
>>>>>>> bit
>>>>>>> more complicated than I expected (spent tons of time
>>>>>>> on
>>>>>>> it)... so if you find any problems, please let me
>>>>>>> know.
>>>>>>> I
>>>>>>> just wish I would have considered the possibility 5
>>>>>>> years
>>>>>>> ago.
>>>>>>>
>>>>>>> One thing is certain, it will *not* be possible to
>>>>>>> rotate
>>>>>>> individual displays (i.e. PFD rotated but not ND)
>>>>>>> unless
>>>>>>> I
>>>>>>> make a complete re-write.
>>>>>>>
>>>>>>> Ciao
>>>>>>>
>>>>>>> Enrico
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-
01-22-2006, 10:16 AM #10Enrico SchirattiGuest
Re: Expanded F6 Zoom
The word "satisfied" only applies to the 60 minutes after
has been said. Sometimes less.
It surely isn't a state of mind.
"Ray Proudfoot" wrote in
message news:385430.77268@wb.onvix.com...
> >
>
> LOL! Make the most of it! Things never stay the same for
> too long Mr Sod
>
> and his law will see to that.
>
>
>
> "Enrico Schiratti" wrote in message
> news:385427.77268@wb.onvix.com...
>>> Probably. When I pressed C+S+R only the PFD was visible.
>>> Moved everything
>>> left, resized and it's great
>>>
>>> Satisfied customer
>>
>> And a satisfied codemonkey here too then.
>>
>>
>>> "Enrico Schiratti" wrote in message
>>> news:385400.77268@wb.onvix.com...
>>>> You probably had pretty large zoom values in the
>>>> pfdset.txt
>>>> file...
>>>>
>>>> "Ray Proudfoot" wrote in
>>>> message news:385399.77268@wb.onvix.com...
>>>>> Thanks Enrico, that did it!
>>>>>
>>>>> Ciao,
>>>>> Ray.
>>>>>
>>>>>
>>>>> "Enrico Schiratti" wrote in message
>>>>> news:385385.77268@wb.onvix.com...
>>>>>> Try clicking on "reset positions" in the menu or
>>>>>> press
>>>>>> Shift-Control-R.
>>>>>>
>>>>>>
>>>>>> "Ray Proudfoot" wrote in
>>>>>> message news:385309.77268@wb.onvix.com...
>>>>>>> Hi Enrico,
>>>>>>>
>>>>>>> Downloaded GC433p but I'm having problems with the
>>>>>>> F6
>>>>>>> page. Despite having
>>>>>>> Capt PFD, Capt ND, Upper and Lower EICAS checked
>>>>>>> nothing
>>>>>>> except the standby
>>>>>>>
>>>>>>> instruments is displayed on the F6 page.
>>>>>>>
>>>>>>> If I deselect LWR EICAS the standby instruments
>>>>>>> diappear
>>>>>>> and come back when
>>>>>>>
>>>>>>> the box is checked again.
>>>>>>>
>>>>>>> Hope you can help.
>>>>>>>
>>>>>>> Cheers,
>>>>>>> Ray.
>>>>>>>
>>>>>>>
>>>>>>> "Enrico Schiratti" wrote in message
>>>>>>> news:385206.77268@wb.onvix.com...
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> I added code that allows individual zooming of the
>>>>>>>> PFD,
>>>>>>>> ND
>>>>>>>> etc... thus the element you select by
>>>>>>>> right-clicking
>>>>>>>> on
>>>>>>>> it
>>>>>>>> can be sized with the numeric keypad + and - keys.
>>>>>>>>
>>>>>>>> http://www.projectmagenta.com/latest.html
>>>>>>>>
>>>>>>>> I tried it in all sorts of configurations, and it
>>>>>>>> was
>>>>>>>> a
>>>>>>>> bit
>>>>>>>> more complicated than I expected (spent tons of
>>>>>>>> time
>>>>>>>> on
>>>>>>>> it)... so if you find any problems, please let me
>>>>>>>> know.
>>>>>>>> I
>>>>>>>> just wish I would have considered the possibility 5
>>>>>>>> years
>>>>>>>> ago.
>>>>>>>>
>>>>>>>> One thing is certain, it will *not* be possible to
>>>>>>>> rotate
>>>>>>>> individual displays (i.e. PFD rotated but not ND)
>>>>>>>> unless
>>>>>>>> I
>>>>>>>> make a complete re-write.
>>>>>>>>
>>>>>>>> Ciao
>>>>>>>>
>>>>>>>> Enrico
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
Similar Threads
-
PM CG F6 Expanded
By PatrikM in forum PM Boeing GCReplies: 0Last Post: 01-14-2011, 07:40 PM -
FSX / Level D 767 Zoom errors et al
By richard hutchinson in forum Computer Hardware SetupReplies: 0Last Post: 05-01-2010, 01:23 PM -
XP 64 : dualhead2go or expanded mode ?
By GSalden in forum Cockpit Outside VisualizationReplies: 3Last Post: 02-02-2009, 01:25 PM -
Zoom Factor for TH2G
By Lambis777 in forum Cockpit Outside VisualizationReplies: 0Last Post: 03-12-2008, 05:19 AM -
Dark screen expanded F6 with GC436
By Detlev Burgbacher in forum PM General Q & AReplies: 0Last Post: 03-11-2006, 10:48 AM
6yo FACECAST LINK 14year GIRLS FORUM : ( )...
YWM RAR JAILBAIT ZOOM