Results 1 to 5 of 5
Thread: Pedal disconnect issue
-
08-15-2014, 06:19 AM #1
- Join Date
- Jul 2013
- Location
- Czech Republic
- Posts
- 64
Pedal disconnect issue
Hi JL,
I am ot able to configure PEDAL DSc function on my steering tillers (CPT and FO, I use the FSCockpit ones).Buttons are detected correctly inside CONFIG, but there is no action during taxi. Can you tell me, what to set for push and release actions or how to set, to get it work?
Many thanks
Jiri, Prague
-
08-15-2014, 04:17 PM #2
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: Pedal disconnect issue
Hi,
What is happening exactly when you taxi with this button pushed in?
You have to use the CPT_PEDALS_DISC and FO_PEDALS_DISC actions, with both the push and release events.
JL
-
08-15-2014, 05:17 PM #3
- Join Date
- Jul 2013
- Location
- Czech Republic
- Posts
- 64
Re: Pedal disconnect issue
Hi JL,
when I push in the button during taxi, the rudder pedals still cause the turning of the aircraft.
Jiri
-
08-16-2014, 06:24 PM #4
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: Pedal disconnect issue
Ok I think this happens oly at speeds above 15kts: I coded the control systems so that the rudder has an effect on the taxiing, I'll raise the limit to above 20 kts.
-
08-17-2014, 04:33 AM #5
- Join Date
- Jul 2013
- Location
- Czech Republic
- Posts
- 64
Re: Pedal disconnect issue
Thank you JL.
Jiri
6yo FACECAST LINK 14year GIRLS FORUM : ( )...
YWM RAR JAILBAIT ZOOM