A320 FMGS B38

[Miatanet]

Hi all,

JH thanks for the new version I've tried now but I still have no NDB, VOR APRT or WPT on the remote PC's
I've tried serveral WIN 7 64B pc's and all have the same issue. If I start the ND on the FSX computer where the
server is running I can see all the NDB, VOR APRT and WPT...

The actions I did:


removed the anti virus software
turned off the fire wall
disconnected the router

but no luck....

I'Ve tried the default port configuration and I saw a error on Port 8005

**12:3:42.720**port 8005:192.168.0.163 connected
**12:3:42.720** fmaps send timeout.
**12:3:55.125**port 8005:192.168.0.167 connected
**12:3:55.125** fmaps send timeout.

after this I've changed the ports to

9610, 9613, 9621 and 9622 because they should be free accoding to the internet steatments

I did start everything but still the same issue no NDB, VOR APRT or WPT.

Here my error logs:

*****WideFMGSserver started at:13:55:48.156
**14:1:35.802** port 9610:192.168.0.167 connected
**14:1:35.803** port 9613:192.168.0.167 connected
**14:1:35.803** port 9621:192.168.0.167 connected
**14:2:44.755** port 9610:192.168.0.163 connected
**14:2:44.755** fmaps send timeout.
**14:2:44.756** port 9613:192.168.0.163 connected
**14:2:44.756** port 9621:192.168.0.163 connected

First CLient PC

*****WideFMGS client started at:14:1:29.142
Create result:1
Host IP: 192.168.0.10
**14:1:30.534** Port 9622: connected
**14:1:33.576** Port 9621: connected
**14:1:33.576** Port 9610: connected
**14:1:33.576** Port 9613: connected

Second Client PC

*****WideFMGS client started at:14:4:3.338
Create result:1
Host IP: 192.168.0.10
**14:4:4.648** Port 9622: connected
**14:4:7.487** Port 9621: connected
**14:4:7.690** Port 9610: connected
**14:4:7.690** Port 9613: connected

ANd NAV Data Log




*13:55:49* Navdata module launched Server
*13:55:49*
*13:55:51*
*13:55:51* Navdata1:
*13:55:51* -ARPTliste:15372
*13:55:51* -NavaidListe:18180
*13:55:51* -FIXliste:186502
*13:55:51* -AWYsegments:97710
*13:55:51* -MarkerList:2505
*13:55:51*
*13:55:51* Navdata2:
*13:55:51* -ARPTliste:15372
*13:55:51* -NavaidListe:18180
*13:55:51* -FIXliste:186502
*13:55:51* -AWYsegments:97710
*13:55:51* -MarkerList:2505
*13:55:51*
*13:55:51* server started on port:9622
*14:01:32* Client connected: 192.168.0.167
*14:01:34* Client connected: 192.168.0.167
*14:02:41* Client connected: 192.168.0.163
*14:02:43* Client connected: 192.168.0.163
*14:02:43* Client connected: 192.168.0.163

Can someone help me with this? What do I wrong here?

Many thanks in advanced!

Mike

Hi Mike

did you start all apps with adminright's, that was what I found out, my account is local admin but I need to use right click on starter.exe and have to choose start as administrator, then it worked.

BR
Stefan

[tcane]

Hallo Mike,

did you following this installation steps?

Jl changed the Navdata since Version 38.3

-Reworked navdata loading:

*Navdata is computed from Aerosoft format to a direct format by the FMGS Server after each AIRAC cycle update
*This process creates .bin files in the Navdata folder (ARPT.bin,FIX.bin, etc)
*These files must be copied on your client computers in the same navdata folder
*If you change scenery or else, you need to delete the files on the server computer to re-generate them (then copy them again).
*If you update the airac cylce manually into navdata\navdata1 and navdata2 folders, you'll have to erase the bin files manually as well.

Made two short test flights yesterday and all (without the displayed disconnection but working clients) works very fine and nice!
BIG THANK YOU FOR YOUR HARD WORK AGAIN!
Looking forward to your next steps, like maybe a weather radar? .

Cheers Florian

[AirbusMike]

Thanks Stefan, I run it under admin rights..

[AirbusMike]

Hi Florian,

this was the missing link, I didn't copy those files to the remote pc's... done and now it work very well

You guys so cool thanks for your help!

Mike

[tcane]

Hi JH and Guys,
have anybody a idea because of my crashing P3D when i start the Jeehell Server? Or how i can finde out what goes wrong?
Slowly it makes me crazy. and i´m really frustrated. Sometimes it works without any problems, sometimes i try more as a half hour to start the server without a crash and suddenly it works again. Firewall, Antivir all are off.
Got now also the newest P3D Version... all Windows and Graphic-Updates.... newest JH Ware...

Help me Obi-Wan, your are my last hope! :/

Florian

[OmniAtlas]

Using the latest P3D 2.5 with the hotfix? Have you updated FSUIPC?

[tcane]

Hi Omni,
Yes with the hotfix and fsuipc is also up to date.

cheers
Florian

[Gregor]

Hi all

Is it ok to run the Starter.exe respectively the StarterFSX.exe with admin privs or does every single .exe need to have admin privs?

And how do you run an .exe with admin privs as an autorun at Windows start (eg. out of the Startup folder)?

Cheers
Greg

[skalarki]

Hi all

Is it ok to run the Starter.exe respectively the StarterFSX.exe with admin privs or does every single .exe need to have admin privs?
Greg

I believe only StarterFSX is enough.

And how do you run an .exe with admin privs as an autorun at Windows start (eg. out of the Startup folder)?

Cheers
Greg

See here:
http://www.tekrevue.com/tip/always-r...administrator/

[Gregor]

Thanks for your advices.

The "Run this program as an administrator" checkbox however only helps if you start the application manually but not if you want to have it started automatically at windows startup (at least I have not found a solution therefore).

Cheers
Greg