A320 FMGS B31

[jeehell]

Ok the question was more to know if you used a virtual machine or some sort of x89 emulator.
Could be linked to graphics drivers...

JL

[OmniAtlas]

I run my Overhead also on a Macbook Pro. I installed Win7 64Bit via Bootcamp. Works very well, but with a bit surmounting for me. ;D

How many LCDs are you outputting from your macbook PRO?

I would like to upgrade my macbook air, and it would be great if I can run multiple monitors -- the only way I think this would be possible would be using TH2GO (although each monitor would have to be the same size) or USB 3.0 to HDMI/DVI output.

For a full MIP I would need the following outputs

1x captain side LCD
1x EICAM, SD LCD
1 x FO LCD
1 x MCDU (FO side to pass for now)

That is 4 monitors!

[OmniAtlas]

Ok the question was more to know if you used a virtual machine or some sort of x89 emulator.
Could be linked to graphics drivers...

JL

Hm, that would be great if your software could run over a virtual machine -- I think it requires higher demands now. With the new terrain graphics enabled it runs sluggish with everything on one computer (2500k i5, 660ti OC Nvidia)

[tcane]

How many LCDs are you outputting from your macbook PRO?

I would like to upgrade my macbook air, and it would be great if I can run multiple monitors -- the only way I think this would be possible would be using TH2GO (although each monitor would have to be the same size) or USB 3.0 to HDMI/DVI output.

For a full MIP I would need the following outputs

1x captain side LCD
1x EICAM, SD LCD
1 x FO LCD
1 x MCDU (FO side to pass for now)

That is 4 monitors!

Hi,
Sorry i run my OVHP only on the original Display from the MacBook till i get my real one . No outsourced Monitors. I think also that the only way is to use multiple Monitors are the TH2GO.

Regars Florian

[OmniAtlas]

Hi,
Sorry i run my OVHP only on the original Display from the MacBook till i get my real one . No outsourced Monitors. I think also that the only way is to use multiple Monitors are the TH2GO.

Regars Florian

I think It may be possible to run all modules from one computer, just have to upgrade my CPU

Right now,

motherboard video outputs - 1x vga, 1x hdmi
Nvidia 660 TI OC - 1x hdmi, 2x dvi, 1x displayport

That is 6 outputs already; 1x output will be used for the projector (visuals), leaving 5 for the glass, and mcdu.

[Stephan Schwarz]

Hello all,

I have installed the EGPWS data successfully and must say, this really enhances the realism feeling a lot
But I only see the terrain on the CPT ND, not on the FO ND. I have tried both ways, using the Offset and using the CPT MCDU menu.

And another one:

when I try to enter coordinates into the MCDU, I get the error message "not in database". How do you enter coordinates into the MCDU?

Regards,
Stephan

[jeehell]

Stephan, you need the EGPWS data on the FO computer, and you must select TERR from FO MCDU or with the FO offset. It should work...

As for the LAT/LON point, the syntax is LAT/LON where:▪ LAT starts with the letter N or S (North or South) then one or two digits for degrees of arc then two digits for minutes of arc, and eventually a decimal part for minutes of arc.
▪ LON starts with the letter E or W (East or West) then one to three digits for degrees of arc then two digits for minutes of arc, and eventually a decimal part for minutes of arc.


Example: N4401.8/E00715 stands for 44°1.8' North and 007°15' East



JL

[OmniAtlas]

Found a solution -- 8 monitors running from one USB!

https://www.youtube.com/watch?v=8ncaCRHJvR8

[jeehell]

Hi all,

Latest update is available on online updater.
Also the full package: http://www.jeehell.org/A320FMGS_B33.2.exe

Regards,
JL

[tcane]

Hi all,

Latest update is available on online updater.
Also the full package: http://www.jeehell.org/A320FMGS_B33.2.exe

Regards,
JL

Hi Jl,
the online udater doesn´t work. I got no popup window with the updater, when i start the server.

Regards
Florian