A320 FMGS B31

[Leonidas]

Hi to all
Unfortunately for me, the "Out of memory" issue in clients insists even after restart!

outofmemory.jpg

[stefangr]

Hi Stefan

I have the same problem with stuttering when climbing have, found when you get the millibar 1013 adjusted the problem

lg Rigo

I have checked this on today's flight, and it looks like this for me:

- CP baro set to 1013 or STD: CP altitude is moving smoothly
- CP baro set to <> 1013: CP alitutde is stuttering
- FO baro set to 1013 or STD: FO altitude is stuttering
- FO baro set to <> 1013: FO altitude is stuttering

Using FS9

Thanks
Stefan

[AUA171]

Hi JL!

With last version of SIOC_Creator the Lower OVHD settings defined with previous versions disappeared.
"Use lower OVHD" is not ticked and all settings are gone (values are empty).

br
Christian

[jeehell]

Hi


@Leonidas: can you check the memory usage on your computer during startup of the software? Thats weird, you're the only one to apparently have those.
How much RAM do you have?


@Stefan: I'll try to improve that again...

@Christian:strange, I thought they would have been kept. If that's the case I'm affraid you'll have to reconfigure it all, as I changed parts of the file format...

Regards,
JL

[AUA171]

Hi Jl!

No problem. As it is only LowerOVHD and not the whole thing it is not a huge effort.

br
Christian

[OmniAtlas]

Hi Jeehell, thank you for all your hard work. The current beta is stable and your software is rocking with the my new visuals (W1080ST projector).

I noticed spoilers remain up and cannot be retracted after landing -- is anyone else having similar issues?

Thanks again, and please take my offer up for some beer, coffee, or whatever you like and I'll send one your way.

[Irinside]

Guys,

I feel so stupid posting this because it is basic FSX stuff, but since installed B32.4 and updates, then removing all and clean installing B33 my frame rates have gone to **** my FSX with sliders maxed runs at 300/400fps unlimited starting JL it drops to just 8 or 9 I have tried all the tricks I know. Feels like there is another program running in he background but control/alt/delete only shows A320 FMGS and components. My Client PC's are all updated and I am out of ideas. Sever s only running on main PC and there is just 1 aircraft loaded, I am stuck, ....please help if you know where I can look , many many thanks Philip

[Leonidas]

Hi
@Leonidas: can you check the memory usage on your computer during startup of the software? Thats weird, you're the only one to apparently have those.
How much RAM do you have?
JL

It's about 10% and 2-3 rows in Device Manager shows EIS.exe 30-50MB each, but after 15-20 minutes becomes 30-40% and each EIS.exe shows 400-500MB. My clients have 2GB RAM.
Regards

[jeehell]

@IRinside: try to limit FSX FPS at 30/40fps.

@Leonidas: Try to launch each EIS manually (from the shortcuts in EIS fodler). Launch ND last. Wait a few minutes in between to let them initialize, and tell me if it works better that way.
If you run two or more EIS on the same computer, 2GB might a little small, I haven't had the opportunity to test that.

@Omniatlas: that's strange. They should retract automatically when disarming the GND SPLR and putting THR LVR back in IDLE.

JL

[tote_320]

It's about 10% and 2-3 rows in Device Manager shows EIS.exe 30-50MB each, but after 15-20 minutes becomes 30-40% and each EIS.exe shows 400-500MB. My clients have 2GB RAM.
Regards

I had some problems runing eis.exe's which i solved with complete windows update.