Results 61 to 70 of 309
Thread: A320 FMGS B45
-
03-24-2016, 05:27 AM #61
Re: A320 FMGS B45
HiStephen, it worked at last.
I restarted the A320_Ehid service and it worked.
I don't know why it didn't work at start. The only change i made between last flight and yesterday was the upgrade of p3d to 3.2.3 version from the 3.1.
In any case, this update works very very well, good job JL!P3D V5 HF1 - PC spec: Intel i5-6600K, 16 GB DDR4 2400, GPU Nvidia GTX1070ti, M2 SSD NVme, JH FMGS, GSX, ASP3D+ASCA+ENVSHADE
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 DislikesSSO liked this post
-
03-24-2016, 01:26 PM #62
Re: A320 FMGS B45
Jean Luc,
Any thoughts on the VATSIM issue?
Further two notes:
1 - I note in the latest version that the keyboard digits above the QWERTY are no longer accepted as input.
Could this be reinstated as well as the "/" above the "7" key?
2 - The new check of synced Altimeter settings. Could I request an option to sync the two? I am running a single seater Sim and this will always be an issue. The best way for me would be if one is changed - the other was adjusted accordingly regardless of which was changed...
That would be greatLast edited by SSO; 03-24-2016 at 08:05 PM. Reason: clarification and an extra question
Cheers Stephen
P3Dv4 Prof, FMGS A320, 1080p OH for ext. & 1080p 24" for int., TM Warthog, VATSIM (vPilot)
-
03-24-2016, 05:20 PM #63
- Join Date
- Oct 2014
- Location
- Germany
- Posts
- 60
Re: A320 FMGS B45
Hi Jean Luc,
I updated to B45.4 and now intercomm app save some stuff however not everything ??? The selected CPT Microfone is not saved by using the save settings button ? Pls advice.
Best regards
Mic
-
03-24-2016, 09:17 PM #64
Re: A320 FMGS B45
Hello just a few things I've noticed with the latest update --
Intercom now runs, however as Mic also mentioned, settings are not saved.
I assigned a PTT PUSH without a release button and had a notification that the mic was open -- so it seems the logic is working.
I am still trying to determine how to integrate this with the setup, apparently it will only work if you have the necessary hardware (skalarki ACP?) -- or would it be possible for someone to write a software panel we can interface with?
*After landing the aircraft the GPWS notification lights up -- I am not too sure if this is normal behaviour.
*My FDS MCDU screen brightness knob is no longer working again...I don't know if this has anything to do with hardware connect crashing, and resetting the switch? I will do more testing.
*Air-conditioning sound level is linked to "avionics" in the sound module and not "AirConditioning"
Otherwise, thank you for the update, and looking forward to B46 with the LNAV/VNAV adjustments.
I would like to hear how all of you are using intercom with your setup and vatsim/ivao.
Thank you,
BenSoarbywire - Airbus Flight Simulation and Engineering | Jeehell FMGS - Free professional A320 avionics software for the cockpit enthusiast.
-
03-25-2016, 03:14 AM #65
Re: A320 FMGS B45
Hi JL,
Do you have a plan to simulate Back-Up Speed Scale (BUSS) for FMGS. It is optional but that will be great if we have this
I tested on FMGS by turned off triple ADRs, then I did not know what is current spd of the bus, may be I need to open slide window and check speed with my hand, j/k
Thanks
-
03-25-2016, 04:14 AM #66
Re: A320 FMGS B45
Additional:
Since version 45.x I can not initiate descent in managed mode at the top of decend.
The speed accelerated slightly and the altitude remains unchanged. I must first initiate
the descent manually. When I changed to managede mode again then it works.
In version 44.x I did not have this behavior. (FCU from CPFlight) Can anyone confirm this behavior?
Bug with minor priority.
When I press the CVR TEST switch the CVR TEST sound is not sound.
I have already checked the switch assignment in IITCreator.
The initial status of the parking brake is not recognized. Don't know why but he responds immediately when I press the Rudder Trim reset.
Both are assigned with the SIOC Creator. I have to examine in more detail for this issue.
-
03-25-2016, 04:21 AM #67
- Join Date
- Dec 2011
- Location
- Abu Dhabi
- Posts
- 57
Re: A320 FMGS B45
Is there a need for ACP hardware (e.g. Skalarki ACPs) to be able to have two headsets w/mics communicate with each other - of course aside from two simple/cheap USB sound cards.
i.e is the JH ware alone enough. I tried by setting up the two headsets in the intercom module but was not able to have them communicate/listen to each other.
-
03-25-2016, 05:02 AM #68
- Join Date
- Sep 2010
- Location
- LGTS
- Posts
- 424
Re: A320 FMGS B45
-
03-25-2016, 05:08 AM #69
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: A320 FMGS B45
Hi everyone,
many anwsers below:
I will have a look at the managed DES issue. Do you start teh DES at/before/after TOD ?
CVR test logic is working, please check the FCOM.
SIOC/PrkBRK: the initial states of switches in SIOC is never defined. You need to recycle switches so they are detected, this is a know SIOC/opencockpit issue.
No.
Regarding the intercom saving : I will release a new version soon it will solve that. For now, only the CPT headset mike and oxy masks are not saved, everything else is.
Hardware ACPs are required for now. I plan to make a soft version, but this takes time.
Air conditonning and avionics : my tests show they are correcly linked... They sound mostly the same...
GPWS: I have no idea, I need more info (aural warning or not).
I actually do not care much about VATSIM/IVAO/any other. I tried to implement compatibility, but they lack most functions of the XPDR and maintaining that is a nightmare. So I'll have a look one day when I feel like to, no needs to ask it won't help.
1. The MCDU keys can now be adjusted in the CPTkeys.ini or FOkeys.ini file which is in the MCDU application folder. Details are inside.
2. I cannot adjsut to everyone's needs, I might add an option one day but not for now, I have much more important work going on.
-
03-25-2016, 05:20 AM #70
Re: A320 FMGS B45
Hi JL,
Thanks for your response.
With previous B44 and earlier version, we can switch Transponder between Standby/Off and Mode C.
But with 45.3 in MCDU , both options are blue up and I can not get Mode C active as below picture
Thank alot
Beautiful Womans in your town for night
B_34 TOGA takeoff