Results 631 to 640 of 971
Thread: A320 FMGS B31
-
03-05-2014, 03:24 AM #631
Re: A320 FMGS B31
Strange.
Everything works in my setup. With and without TOPCAT. With and without real weather.
I attach screenshots:
https://www.dropbox.com/sh/bg0p1e8he0co0de/y1zlBCoinH
When I use TOPCAT, prepare load, then I'm doing exports. Then send (not save).
P3D2.1 without the hotfix.
Maybe TAT/SAT is wrong?
What you have language in windows? Maybe here is the problem:
http://www.nirvanatec.com/support/regional_sett.htm
-
03-05-2014, 04:11 AM #632
Re: A320 FMGS B31
Hi ToTom -- can you try installing P3D2.1 with the hotfix? That may be the problem, it is the only other thing I have installed in P3D besides the 32.2 upgrade. I am using OPUS. TAT/SAT temperatures are reasonable - ~ 23 degrees (YBBN)
My regional language... just english/american I think...I don't think that should matter because it was working fine before.
If it is not a flap/spoilers problem (all are retracted), then somehow I think the AP (FCU) is not communicating correctly with the aircraft to tell it to pitch correctly, especially when in CLB throttle mode.
-
03-05-2014, 04:32 AM #633
Re: A320 FMGS B31
I do not installed the hotfix, because I do not use a2a aircraft. Is there any other reason to install this hotfix?
Have you tried FMGS with FSX?
-
03-05-2014, 04:49 AM #634
Re: A320 FMGS B31
Well, did another test -- I can climb in TOGA mode...albeit slowly. Once I go to CLB mode the aircraft fails to climb.
Too heavy? But I have put minimal fuel, and weights....
-
03-05-2014, 04:51 AM #635
-
03-05-2014, 08:06 AM #636
Re: A320 FMGS B31
Try this saved flight:
https://www.dropbox.com/s/2172x9ty6u...flight_P3D.zip
And, for example, this route:
EPKK25 SUDOL L619 NUDRO L619 DENKO L996 CHO EPSC
PS. I installed the hotfix. Everything works fine.
-
03-05-2014, 08:49 AM #637
- Join Date
- Oct 2008
- Location
- Germany
- Posts
- 86
Re: A320 FMGS B31
hello jeehell, after the todays update the ND on captains side isnt working anymore. display stays dark.... yesterday It worked fine.... any idea what could be the problem? ND is connected to the server..
best regards. marco
-
03-05-2014, 11:35 AM #638
- Join Date
- Aug 2013
- Location
- eddn
- Posts
- 210
Re: A320 FMGS B31
Hey Jl,
today i try your recommendation. I have made a new fresh installation of your software and made the autoupdate. I declare the two opencockpit axis from the Flaps and Spoilerlever in your SIOC Creator, so like you say it, and assign after in the FMGS Config as a Joystick. It has also recognized both axes. So far so good. The Flaps axis could not be move the controller, but there were data output to calibrate the detents. I think this is normally because i got this same issue by the ruder pedals sometimes.
But when i have started all, i can not move the Flaps... no sounds, nothing. The Spoiler works fine and well.
In this picture you can see that both axis assign.
I hope you or somebody can help me with this... :,(
Florian
-
03-05-2014, 12:02 PM #639
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: A320 FMGS B31
Hello,
@Tcane: easy issues first: your error zone is WAY too big. Use 20 maximum in your case. You should use a value of around 10% of the total range of your axis, here you go from 0 to 255 so 10% is around 25. 20 should be fine also, this allows each detent not to overlap with the next one (for example FLAPS 0 is 3, plus 20 it is 23 which is less than flaps1-20=43 , so no overlaping here). If you use a SIOC analog axis for you rudder, you probably have the same issue with neutral zone!
@Simstar: no idea, for me it works correctly. As said already in several threads, since B32, there is no longer any ND.exe to run. You must run the shortcuts located in EIS folder if you want to start the software manually. Or run using the starter.
Also, if you (re)installed the complete suite, please use the B32.2 installer.
@OmniAtlas: If weight & balance is not the issue, nor the flaps/splrs/gear, then I can only see an issue with your weather addon. Some create strange things in P3D as far as I know. Please try with the default P3D weather system (use the default clear sky theme).
JL
-
03-05-2014, 12:23 PM #640
- Join Date
- Sep 2013
- Location
- Speyer, Germany
- Posts
- 191
Connect casually with like-minded individuals on the ultimate dating platform. Genuine Damsels...
Progamming help with FSBus dll