Results 31 to 40 of 166
Thread: A320 FMGS B34
-
05-22-2014, 06:12 PM #31
Re: A320 FMGS B34
JeanLuc,
An issue I have observed at a couple of autoupdates is that additional modules were installed as compared to what was initially installed.
For the one I did today, the autoupdater has installed the CPT MCDU although I have that installed and running on a separate machine.
Not sure how the autoupdater gathers its information
Is it ok just to shut down the applications that would else be double, and just delete the .exe on the machine it should not be on?
Doing a reinstall just makes the issue reappear.
(I have noticed the same issue with the SBY PFD for a number of updates)Cheers Stephen
P3Dv4 Prof, FMGS A320, 1080p OH for ext. & 1080p 24" for int., TM Warthog, VATSIM (vPilot)
-
05-22-2014, 06:22 PM #32
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: A320 FMGS B34
Hi René,
THis is an interesting issue. I'll get in touch via PM in the next days (a bit busy right now).
JL
-
05-22-2014, 06:31 PM #33
- Join Date
- Oct 2013
- Location
- Germany
- Posts
- 196
Re: A320 FMGS B34
Hi JL,
you're welcome! I'm just waiting so far. Meanwhile I'll test the other approaches especially the 07 ones.
René
-
05-22-2014, 07:54 PM #34
-
05-23-2014, 03:10 AM #35
Re: A320 FMGS B34
For those familiar with the autopilot disconnect -
3 Calvery degradation sounds if the aircraft is configured for a cat3 landing?
1 Calvery sound if it is cat 1 only? Regards.
-
05-23-2014, 03:38 AM #36
- Join Date
- Oct 2013
- Location
- Germany
- Posts
- 196
-
05-23-2014, 11:14 AM #37
- Join Date
- Aug 2013
- Location
- eddn
- Posts
- 210
Re: A320 FMGS B34
Hey there,
I donīt won't to annoy but i was able to recover the error using the non-functional keys and thus limit.
I use for the inputs the I/O Card from ARCAZE and one Card or the associated key for the "GND Spoilers Armed" has an small issue, every time if i put it to the "armed" Mode the I/O-Device disconnect and reconnect and i got a small brake on my system. Unfortunately, I have this error always and donīt know what it is. Before the update that was no problem for Jeehell, but since then, it crashes and I really can not press any more buttons or similar...
Jean Luc, maybe you can fix this?? *begging look* ))
Also, did you finde out something with the 8,33kHz Frequencies?
Looking forward to your reply
king regards
Florian
-
05-23-2014, 11:27 AM #38
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: A320 FMGS B34
Hi Florian,
can you describe a bit more your problem with the I/O?
I do not know how the arcaze module works, so please explain with details the interactions between hard/soft (liek the protocol used for isntance).
As for the 8.33khz: I have plans for it very soon, but not the next update I think. I hope before end of June.
Regards,
JL
-
05-23-2014, 12:55 PM #39
- Join Date
- Aug 2013
- Location
- eddn
- Posts
- 210
Re: A320 FMGS B34
Hi JL,
thanks for your reply...
The ARCAZE Modul can simulates some devices ( Analog and Digital Joypad also a Virtual Keyboard). You can connect something like Pushbuttons, switches, Encoders and something more to it.
Here you can find a small WIKI and also the SDK. (I hope you mean this with the used protocol :/)
My problem is that i got a Microswitch (built it in to the Flapslever) who is connected to one of this ARCAZE Modul. I assigned in the Software from the Arcaze as a Digital Joypad with the Number "4" for example and assigned also in your FMGS_Config as the "Spoilers Armed Button". Everytime if i activate the spoiler (push the microswitch) the USB-ARCAZE disconnect and reconnect to the PC-System. (Hear the typical Windowssounds) After this your Hard-Softwareware? freezes and i canīt push any button, joystick or something who is connected to your software. But if i push the Microswitch for the Spoilers again i hear again the dis- and reconnect sound. So i think that the ARCAZE still works.
I know that the main error is not coming from your software (the dis- and reconnect is a problem from the ARCAZE), but before the update was this short interruption no problem for Jeehell and everything works on as usual.
By the way i got a small question between the Arcaze Virtual Keyboard and your Software. The ARCAZE- Community got a issue with Encoders when we assigned as an Digital Encoder Joypad. The Arcaze always swallowed signals and skips so much that we have a long time to turn before something is happen on the "ALT" for example. But if we assigned this Encoder as a Virtual Keyboard, all works fine and perfect but we canīt assigned in your software, because you didnīt support keys. Is there somehow the possibility to change this? I know, thatīs also a problem of the ARCAZE but the support from the owner has become so bad. And we see no fix for this.
As the 8.33khz: Ok, sounds great and is enough for me already! No stress and a big big thank you for your help!
Regards,
Florian
-
05-23-2014, 05:03 PM #40
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: A320 FMGS B34
Ok so this is a joystick then.
WHat action did you setup for the spoiler? there are several available:
-spoiler ARM/DISARM
-spolier ARM
-spoiler DISARM
In your case, if I understand correctly, you shoud use the spoiler ARM/DISARM action, coupled with a TOGGLE event.
As for the connect/disconnect: I do not know that arcaze system, but it does not sound nice to hear that. Are you sure of the power supply and all? it should not do that...
Keyboard actions: I thought about that already, just need to find some time to implement it...
Regards,
JL
Search Pretty Girls in your city for night
HDG preselect function