Results 11 to 20 of 24
Thread: IOCP
-
06-30-2011, 04:11 PM #11
- Join Date
- May 2011
- Location
- Europe
- Posts
- 11
Re: IOCP
Hello
I have now one expansion and master card and i am trying to write something, but it is without success.
So first, i would like to ask you if i have everything well installed. I have FSX, Maddog, SIOC and FSUIPC from www.schiratti.com. Is it right?
I tested my card in controlador (everything was ok), than i write something like this:
//--------------------LANDING GEAR-------------------------
Var 2330, Link IOCARD_SW, Input 1, Type I // GEAR
//--------------------GEAR RELEASE-------------------------
Var 2350, Link IOCARD_SW, Input 2, Type I // GEAR RELEASE
i saved it as sioc.ssi, reload sioc.exe and i started FSX.
The surprise was that it was doing nothing. Except the blinking led light on expansion card.
Can you save me?
-
06-30-2011, 04:27 PM #12
Re: IOCP
Hi,
I'm not surprised at all
Your program does nothing... You only have defined two variables linked to inputs. These variables will hold the values of the inputs, but you do nothing with these values ..
Please study my simple examples at my howto page first.
Nico
-
07-12-2011, 04:29 AM #13
- Join Date
- May 2011
- Location
- Europe
- Posts
- 11
Re: IOCP
Hi I am again here and I have a lot of questions.
I understand SIOC a little bit, but everywhere on Internet sites about home cockpits and itīs software i found IOCP server and IOCP network and IOCP, IOCP....
So i would like to know what is it, for what is it, what can i do with it, and how to make it. If you can help me i will be very happy. Or if you can tell me where can i get some useful documents about it (step by step (something for beginners )).
And i have one more problem, with FSX Maddog Md80 2010 offsets. I don't know where can i get it.
-
07-12-2011, 05:37 AM #14
Re: IOCP
Hi,
Forget about IOCP servers and the IOCP protocol. Most people do not need it. You only need SIOC.exe Config_sioc.exe, a text editor and a Beer!
You can access FSX/FS9 information/controls via FSUIPC offsets in your SIOC script, there is really no need to use IOCP variables.
regards,
Nico
-
07-12-2011, 07:49 AM #15
- Join Date
- May 2011
- Location
- Europe
- Posts
- 11
Re: IOCP
Ok, but i will need it later. Ee and where can i get FSUIPC offsets for maddog? I tried google but google donīt know nothing about it. Maybe on http://www.flythemaddog.com/forum/index.php but i have now some registration problems.
-
07-12-2011, 08:01 AM #16
Re: IOCP
I don't think you will need a later.
FSUIPC offsets are 'generic' offsets that most aircrafts support. There are no specific Maddog offsets, just as there are no specific IOCP variables for Maddog. The list of FSUIPC offsets is available in the FSUIPC SDK at Pete Dowson's page.
-
07-12-2011, 09:45 AM #17
Re: IOCP
One thing I would like to mention here,
be careful with add-ons, many addons will use internal variables which they dont make available via fsuipc offset rendering then somewhat
useless for cockpit builders. The list with addons which provides offsets is to my knowledge rather small : (correct me if I am wrong or I forget
some) Level-D 767 , Ifly 737, project magenta, flightdecksoftware, AST , jeehell airbus, ...)
Greetings PeterFS9+PM+AST+opencockpits
-
07-12-2011, 02:16 PM #18
- Join Date
- May 2011
- Location
- Europe
- Posts
- 11
Re: IOCP
Ehm. My script is working!
// *3.txt
// *12-07-2011
Var 0000, Value 0 // Initialization
{
v0001 = 0
}
// -----------------------Parkovacia brzda----------------------------
Var 0001, Link FSUIPC_INOUT, Offset $0BC8, Length 2 // Parking brake
Var 0002, Link IOCARD_SW, Input 1, Type I // Vstup pre prepinac
{
IF v0002 = 1
{
v0001 = 32767
}
ELSE
{
v0002 = 0
}
}
// -----------------------Podvozok------------------------------------
Var 0010, Link FSUIPC_INOUT, Offset $0BE8, Length 4 // Gear control
Var 0011, Link IOCARD_SW, Input 2, Type I // Vstup pre gear down
{
IF v0011 = 1
{
v0010 = 16383
}
ELSE
{
v0010 = 0
}
}
I don't think, that in FSUIPC offsets status list are all switches from overhead. At least, it's very difficult to find the right offset to some switch. Is there some way how to find it from running FSX? Some program which will be open at the same time as FSX, i will push some button in FSX and it will show me in which offset was made change. Or something like that.
-
07-18-2011, 09:17 AM #19
- Join Date
- May 2011
- Location
- Europe
- Posts
- 11
Re: IOCP
I examine FSUIPC add-on in menu taskbar in FSX. There is logging and i can see events in maddog. If i push some switch, i can see line like this
xxxxxx *** Event: Cntrl= xxxxx (some numbers 1), Param=x (some numbers 2) Name. (x are numbers). Is there in this line some information about which offset is it (offset which I can use in SIOC script), which value it has and Length? Thank you.
-
09-02-2011, 03:36 PM #20
- Join Date
- Feb 2011
- Location
- Tygelsjoe
- Posts
- 4
Re: IOCP
This is an example from md80project.dk where there is a lot of experts on MADDOG. I have built an annunciater panel sith the below code:
MADMAP.LUA:
ovhd_a1 = ipc.readLvar("Lvhd_eoap_a1_adv1")
ovhd_a2 = ipc.readLvar("Lvhd_eoap_a2_adv1")
ovhd_a3 = ipc.readLvar("Lvhd_eoap_a3_adv1")
ovhd_a4 = ipc.readLvar("Lvhd_eoap_a4_adv1")
ovhd_a5 = ipc.readLvar("Lvhd_eoap_a5_adv1")
ovhd_a6 = ipc.readLvar("Lvhd_eoap_a6_adv1")
ovhd_a7 = ipc.readLvar("Lvhd_eoap_a7_adv1")
ovhd_b1 = ipc.readLvar("Lvhd_eoap_b1_adv1")
ovhd_b2 = ipc.readLvar("Lvhd_eoap_b2_adv1")
ovhd_b3 = ipc.readLvar("Lvhd_eoap_b3_adv1")
ovhd_b4 = ipc.readLvar("Lvhd_eoap_b4_adv1")
ovhd_b5 = ipc.readLvar("Lvhd_eoap_b5_adv1")
ovhd_b6 = ipc.readLvar("Lvhd_eoap_b6_adv1")
ovhd_b7 = ipc.readLvar("Lvhd_eoap_b7_adv1")
ovhd_c1 = ipc.readLvar("Lvhd_eoap_c1_adv1")
ovhd_c2 = ipc.readLvar("Lvhd_eoap_c2_adv1")
ovhd_c3 = ipc.readLvar("Lvhd_eoap_c3_adv1")
ovhd_c4 = ipc.readLvar("Lvhd_eoap_c4_adv1")
ovhd_c5 = ipc.readLvar("Lvhd_eoap_c5_adv1")
ovhd_c6 = ipc.readLvar("Lvhd_eoap_c6_adv1")
ovhd_c7 = ipc.readLvar("Lvhd_eoap_c7_adv1")
disp = disp .. "ovhd_a1 = " .. ovhd_a1 .. "\n"
disp = disp .. "ovhd_a2 = " .. ovhd_a2 .. "\n"
disp = disp .. "ovhd_a3 = " .. ovhd_a3 .. "\n"
disp = disp .. "ovhd_a4 = " .. ovhd_a4 .. "\n"
disp = disp .. "ovhd_a5 = " .. ovhd_a5 .. "\n"
disp = disp .. "ovhd_a6 = " .. ovhd_a6 .. "\n"
disp = disp .. "ovhd_a7 = " .. ovhd_a7 .. "\n"
disp = disp .. "ovhd_b1 = " .. ovhd_b1 .. "\n"
disp = disp .. "ovhd_b2 = " .. ovhd_b2 .. "\n"
disp = disp .. "ovhd_b3 = " .. ovhd_b3 .. "\n"
disp = disp .. "ovhd_b4 = " .. ovhd_b4 .. "\n"
disp = disp .. "ovhd_b5 = " .. ovhd_b5 .. "\n"
disp = disp .. "ovhd_b6 = " .. ovhd_b6 .. "\n"
disp = disp .. "ovhd_b7 = " .. ovhd_b7 .. "\n"
disp = disp .. "ovhd_c1 = " .. ovhd_c1 .. "\n"
disp = disp .. "ovhd_c2 = " .. ovhd_c2 .. "\n"
disp = disp .. "ovhd_c3 = " .. ovhd_c3 .. "\n"
disp = disp .. "ovhd_c4 = " .. ovhd_c4 .. "\n"
disp = disp .. "ovhd_c5 = " .. ovhd_c5 .. "\n"
disp = disp .. "ovhd_c6 = " .. ovhd_c6 .. "\n"
disp = disp .. "ovhd_c7 = " .. ovhd_c7 .. "\n"
ipc.writeUD(0x66f0,ovhd_a1)
ipc.writeUD(0x66f4,ovhd_a2)
ipc.writeUD(0x66f8,ovhd_a3)
ipc.writeUD(0x66fc,ovhd_a4)
ipc.writeUD(0x6700,ovhd_a5)
ipc.writeUD(0x6704,ovhd_a6)
ipc.writeUD(0x6708,ovhd_a7)
ipc.writeUD(0x670c,ovhd_b1)
ipc.writeUD(0x6710,ovhd_b2)
ipc.writeUD(0x6714,ovhd_b3)
ipc.writeUD(0x6718,ovhd_b4)
ipc.writeUD(0x671c,ovhd_b5)
ipc.writeUD(0x6720,ovhd_b6)
ipc.writeUD(0x6724,ovhd_b7)
ipc.writeUD(0x6728,ovhd_c1)
ipc.writeUD(0x672c,ovhd_c2)
ipc.writeUD(0x6730,ovhd_c3)
ipc.writeUD(0x6734,ovhd_c4)
ipc.writeUD(0x6738,ovhd_c5)
ipc.writeUD(0x673c,ovhd_c6)
ipc.writeUD(0x6740,ovhd_c7)
SICO script:
// Annunciater panel
Var 0030, name ovhd_a1, Link FSUIPC_IN, Offset $66f0, Length 4 // AHRS 1
{
L0 = &ovhd_a1
IF L0 = 0
{
L1 = 1
}
IF L0 = 100
{
L1 = 0
}
&a1 = L1
}
Var 0040, name a1, Link IOCARD_OUT, Device 1, Output 43 //
Var 0031, name ovhd_a2, Link FSUIPC_IN, Offset $66f4, Length 4 // Elevator PWR
{
L0 = &ovhd_a2
IF L0 = 0
{
L1 = 1
}
IF L0 = 100
{
L1 = 0
}
&a2 = L1
}
Var 0041, name a2, Link IOCARD_OUT, Device 1, Output 46 //
Var 0032, name ovhd_a3, Link FSUIPC_IN, Offset $66f8, Length 4 // Not in op.
{
L0 = &ovhd_a3
IF L0 = 0
{
L1 = 1
}
IF L0 = 100
{
L1 = 0
}
&a3 = L1
}
Var 0042, name a3, Link IOCARD_OUT, Device 1, Output 49 //
Var 0033, name ovhd_a4, Link FSUIPC_IN, Offset $66fc, Length 4 // L Eng Anti Ice
{
L0 = &ovhd_a4
IF L0 = 0
{
L1 = 1
}
IF L0 = 100
{
L1 = 0
}
&a4 = L1
}
Var 0043, name a4, Link IOCARD_OUT, Device 1, Output 52 //
Var 0034, name ovhd_a5, Link FSUIPC_IN, Offset $6700, Length 4 // L Fuel Heat On
{
L0 = &ovhd_a5
IF L0 = 0
{
L1 = 1
}
IF L0 = 100
{
L1 = 0
}
&a5 = L1
}
Var 0044, name a5, Link IOCARD_OUT, Device 1, Output 55 //
Var 0035, name ovhd_a6, Link FSUIPC_IN, Offset $6704, Length 4 // CARGO Fire
{
L0 = &ovhd_a6
IF L0 = 0
{
L1 = 1
}
IF L0 = 100
{
L1 = 0
}
&a6 = L1
}
Var 0045, name a6, Link IOCARD_OUT, Device 1, Output 58 //
Var 0036, name ovhd_a7, Link FSUIPC_IN, Offset $6708, Length 4 // AC Emerg. Bus Off
{
L0 = &ovhd_a7
IF L0 = 0
{
L1 = 1
}
IF L0 = 100
{
L1 = 0
}
&a7 = L1
}
Var 0046, name a7, Link IOCARD_OUT, Device 1, Output 61 //
Var 0050, name ovhd_b1, Link FSUIPC_IN, Offset $670c, Length 4 // AHRS 2
{
L0 = &ovhd_b1
IF L0 = 0
{
L1 = 1
}
IF L0 = 100
{
L1 = 0
}
&b1 = L1
}
Var 0060, name b1, Link IOCARD_OUT, Device 1, Output 44 //
Var 0051, name ovhd_b2, Link FSUIPC_IN, Offset $6710, Length 4 // Not in op.
{
L0 = &ovhd_b2
IF L0 = 0
{
L1 = 1
}
IF L0 = 100
{
L1 = 0
}
&b2 = L1
}
Var 0061, name b2, Link IOCARD_OUT, Device 1, Output 47 //
Var 0052, name ovhd_b3, Link FSUIPC_IN, Offset $6714, Length 4 // APU Starter On
{
L0 = &ovhd_b3
IF L0 = 0
{
L1 = 1
}
IF L0 = 100
{
L1 = 0
}
&b3 = L1
}
Var 0062, name b3, Link IOCARD_OUT, Device 1, Output 50 //
Var 0053, name ovhd_b4, Link FSUIPC_IN, Offset $6718, Length 4 // Wing Anti Ice
{
L0 = &ovhd_b4
IF L0 = 0
{
L1 = 1
}
IF L0 = 100
{
L1 = 0
}
&b4 = L1
}
Var 0063, name b4, Link IOCARD_OUT, Device 1, Output 48 //
Var 0054, name ovhd_b5, Link FSUIPC_IN, Offset $671c, Length 4 // Tail DeIce
{
L0 = &ovhd_b5
IF L0 = 0
{
L1 = 1
}
IF L0 = 100
{
L1 = 0
}
&b5 = L1
}
Var 0064, name b5, Link IOCARD_OUT, Device 1, Output 56 //
Var 0055, name ovhd_b6, Link FSUIPC_IN, Offset $6720, Length 4 // Tail Temp High
{
L0 = &ovhd_b6
IF L0 = 0
{
L1 = 1
}
IF L0 = 100
{
L1 = 0
}
&b6 = L1
}
Var 0065, name b6, Link IOCARD_OUT, Device 1, Output 59 //
Var 0056, name ovhd_b7, Link FSUIPC_IN, Offset $6724, Length 4 // APU Fire
{
L0 = &ovhd_b7
IF L0 = 0
{
L1 = 1
}
IF L0 = 100
{
L1 = 0
}
&b7 = L1
}
Var 0066, name b7, Link IOCARD_OUT, Device 1, Output 62 //
Var 0070, name ovhd_c1, Link FSUIPC_IN, Offset $6728, Length 4 // AHRS 3
{
L0 = &ovhd_c1
IF L0 = 0
{
L1 = 0
}
IF L0 = 100
{
L1 = 0
}
&c1 = L1
}
Var 0080, name c1, Link IOCARD_OUT, Device 1, Output 45 //
Var 0071, name ovhd_c2, Link FSUIPC_IN, Offset $672c, Length 4 // Rudder
{
L0 = &ovhd_c2
IF L0 = 0
{
L1 = 1
}
IF L0 = 100
{
L1 = 0
}
&c2 = L1
}
Var 0081, name c2, Link IOCARD_OUT, Device 1, Output 53 //
Var 0072, name ovhd_c3, Link FSUIPC_IN, Offset $6730, Length 4 // Cabin Oxygen On
{
L0 = &ovhd_c3
IF L0 = 0
{
L1 = 1
}
IF L0 = 100
{
L1 = 0
}
&c3 = L1
}
Var 0082, name c3, Link IOCARD_OUT, Device 1, Output 51 //
Var 0073, name ovhd_c4, Link FSUIPC_IN, Offset $6734, Length 4 // R Eng. Anti Ice
{
L0 = &ovhd_c4
IF L0 = 0
{
L1 = 1
}
IF L0 = 100
{
L1 = 0
}
&c4 = L1
}
Var 0083, name c4, Link IOCARD_OUT, Device 1, Output 54 //
Var 0074, name ovhd_c5, Link FSUIPC_IN, Offset $6738, Length 4 // R Fuel Heat On
{
L0 = &ovhd_c5
IF L0 = 0
{
L1 = 1
}
IF L0 = 100
{
L1 = 0
}
&c5 = L1
}
Var 0084, name c5, Link IOCARD_OUT, Device 1, Output 57 //
Var 0075, name ovhd_c6, Link FSUIPC_IN, Offset $673c, Length 4 // Cabin Alt
{
L0 = &ovhd_c6
IF L0 = 0
{
L1 = 1
}
IF L0 = 100
{
L1 = 0
}
&c6 = L1
}
Var 0085, name c6, Link IOCARD_OUT, Device 1, Output 60 //
Var 0076, name ovhd_c7, Link FSUIPC_IN, Offset $6740, Length 4 // DC Emerg. Bus Off
{
L0 = &ovhd_c7
IF L0 = 0
{
L1 = 1
}
IF L0 = 100
{
L1 = 0
}
&c7 = L1
}
Var 0086, name c7, Link IOCARD_OUT, Device 1, Output 63 //
Girls in your town
A320 Sound Files Missing