Results 11 to 20 of 36
-
01-30-2008, 04:49 PM #11
- Join Date
- Dec 2006
- Location
- Ireland
- Posts
- 255
Why not using the build-in logic ??
Just set the firestatus Offset to 51 or 52 or 53.
All needed indications comes ON and ONLY by pulling the Firehandle the ENG/APU cuts, not before. This part is as well included by setting the variable/Offset, e.g. ENG1 eng1firehandlepull (should be connected to your hardware.
if firestatus = 51
FireHandleEng1 = 1
overheateng1 = 1
firesolenoideng1 = 1
firebell = 1
sixpackovhedet = 1
endif
if firestatus = 52
FireHandleEng2 = 1
overheateng2 = 1
firesolenoideng2 = 1
firebell = 1
sixpackovhedet = 1
endif
if firestatus = 53
FireHandleApu = 1
firesolenoidapu = 1
firebell = 1
sixpackovhedet = 1
endifRegards
Thomas
-
02-04-2008, 05:56 AM #12
hello,
And for pminstructor we have to add this lines?
ADD TO 'FAIL.TXT'
ENG1/FIRE, 5648, 4, 51, 0
ENG2/FIRE, 5648, 4, 52, 0
best regards,
Achilles
-
02-04-2008, 06:49 AM #13
- Join Date
- Dec 2006
- Location
- Ireland
- Posts
- 255
-
02-04-2008, 11:26 AM #14
Another step done:
I encluded the described offsets into my pmInst Systems/Fail and it works:
When pushing the ENG1/FIRE button the Fire Handle Lights and the Overheat Eng1 indication come on.
But:
A) The engine does not cut, when pulling the handle (as described) and there is no "firebell sound".
B) How can I trigger the firebell sound??? Where is the sound located? Cannot find it in pmSounds ... ?
ThxRené
-
02-04-2008, 11:42 AM #15
- Join Date
- Dec 2006
- Location
- Ireland
- Posts
- 255
-
02-04-2008, 11:44 AM #16
- Join Date
- Dec 2006
- Location
- Ireland
- Posts
- 255
-
02-04-2008, 11:45 AM #17
- Join Date
- Oct 2005
- Location
- Holley, New York U.S.A.
- Posts
- 1,776
Ahhh Beat me to it Thomas..... Thank you for being so active on this site! You have been a lot of help and I want you to know it is appreciated!
Bob Reed
-
02-04-2008, 12:16 PM #18What are the Offset where are the Fire Handles connected to?
5652 eng1firehandlepull ENG1 FIRE HANDLE PULL OFF= CLR BIT 0 / PULL = SET BIT 0
5652 eng1firehandleleft ENG1 FIRE HANDLE LEFT OFF= CLR BIT 1 / LEFT = SET BIT 1
5652 eng1firehandleright ENG1 FIRE HANDLE RIGHT OFF= CLR BIT 2 / RIGHT = SET BIT 2
5652 eng2firehandlepull ENG2 FIRE HANDLE PULL OFF= CLR BIT 3 / PULL = SET BIT 3
5652 eng2firehandleleft ENG2 FIRE HANDLE LEFT OFF= CLR BIT 4 / LEFT = SET BIT 4
5652 eng2firehandleright ENG2 FIRE HANDLE RIGHT OFF= CLR BIT 5 / RIGHT = SET BIT 5
5652 apufirehandlepull APU FIRE HANDLE PULL OFF= CLR BIT 6 / PULL = SET BIT 6
5652 apufirehandleleftright APU FIRE HANDLE LEFT/RIGHT OFF= CLR BIT 7 / LEFT/RIGHT = SET BIT 7
Thanks, Thomas, appreciate your supportRené
-
02-04-2008, 05:44 PM #19
Thomas,
My sixpack fire warn do not light. I use cpflight card. But also I do not see the light at pmsystems. I used the bellow at logics
if firestatus = 51
FireHandleEng1 = 1
overheateng1 = 1
firesolenoideng1 = 1
firebell = 1
sixpackovhedet = 1
endif
if firestatus = 52
FireHandleEng2 = 1
overheateng2 = 1
firesolenoideng2 = 1
firebell = 1
sixpackovhedet = 1
endif
if firestatus = 53
FireHandleApu = 1
firesolenoidapu = 1
firebell = 1
sixpackovhedet = 1
endif
best regards,
Achilles
-
02-04-2008, 06:53 PM #20
- Join Date
- Dec 2006
- Location
- Ireland
- Posts
- 255
Similar Threads
-
a320 engine start offset
By spiro in forum I/O Interfacing Hardware and SoftwareReplies: 0Last Post: 08-10-2010, 02:26 PM -
Engine Sound Offset? (FS9)
By ChrisKLAS in forum Cockpit SoundsReplies: 0Last Post: 12-14-2009, 09:54 PM -
B737 Engine start flick back offset
By PatrikM in forum PMSystemsReplies: 4Last Post: 08-11-2008, 03:59 PM -
Searching for offsets
By Fabrizio De Napoli in forum PM General Q & AReplies: 0Last Post: 02-12-2006, 12:53 PM
Pretty Womans in your city
Find Sexy Womans from your city...