Results 11 to 12 of 12
Thread: variables ?
-
01-24-2006, 04:06 AM #11Enrico SchirattiGuest
Re: variables ?
I looked at this portion a bit, if I am in the air switch
the IRS off, I can't get them to display anymore. There must
be a way around this. (because if the (fsGS > 0) part.
I see no reason why the displays are not switched off in you
setup though. Are you certain your sysvar.txt has been
updated with the version currently online?
Ciao
Enrico
"Enrico Schiratti" wrote in message
news:385646.77259@wb.onvix.com...
> Hi,
>
> it is implemented *only* for the 747 and I would have to
> check the conditions when it wouldn't apply.
>
> On the ground, not moving, it works as it should.
>
> Enrico
>
> "Michel Vandaele" wrote in message
> news:385582.77259@wb.onvix.com...
>> Hi Enrico,
>> I did see the correct variables names in PMSystem.
>> Thanks.
>>
>> But is the system working already? (Parcially blanking
>> displays
>> (PFD/ND) as long the IRS isn't aligned)
>>
>> As yesterday with builds GC453e CDU377d situation was
>> behaving as before
>> (when entering coordinates in the cdu - screens were
>> coming immidiately
>> to live - nevetheless IRS knobs were off or NAV.
>>
>> I saw counting as small figure in pmsystem (next to irs
>> panel) but these
>> didn't seems to have an influence.
>>
>> Is there a setting which has to be changed in the ini's
>> or
>> isn't it
>> implemented yet for the Queen?
>>
>> B. rgds
>> Michel
>>
>
-
01-24-2006, 04:00 PM #12Michel VandaeleGuest
Re: variables ?
Hi Enrico,
Thank youi for looking at it.
I'm two days away, so will check it on thursday.
"Enrico Schiratti" wrote in message
news:385860.77259@wb.onvix.com...
>I looked at this portion a bit, if I am in the air switch
> the IRS off, I can't get them to display anymore. There must
> be a way around this. (because if the (fsGS > 0) part.
>
Hmm from memory I think if for what ever reason the IRS are switched of,
there is now way they can't be fully aligned again. Via ATT a present hdg
can be put in , but that's all I think. But as I said, its form my memory.
Will have to check
> I see no reason why the displays are not switched off in you
> setup though. Are you certain your sysvar.txt has been
> updated with the version currently online?
>
I tought I did, but will check it before I test again
Many thanks for help
Michel
> Ciao
>
> Enrico
>
> "Enrico Schiratti" wrote in message
> news:385646.77259@wb.onvix.com...
>> Hi,
>>
>> it is implemented *only* for the 747 and I would have to
>> check the conditions when it wouldn't apply.
>>
>> On the ground, not moving, it works as it should.
>>
>> Enrico
>>
>> "Michel Vandaele" wrote in message
>> news:385582.77259@wb.onvix.com...
>>> Hi Enrico,
>>> I did see the correct variables names in PMSystem.
>>> Thanks.
>>>
>>> But is the system working already? (Parcially blanking
>>> displays
>>> (PFD/ND) as long the IRS isn't aligned)
>>>
>>> As yesterday with builds GC453e CDU377d situation was
>>> behaving as before
>>> (when entering coordinates in the cdu - screens were
>>> coming immidiately
>>> to live - nevetheless IRS knobs were off or NAV.
>>>
>>> I saw counting as small figure in pmsystem (next to irs
>>> panel) but these
>>> didn't seems to have an influence.
>>>
>>> Is there a setting which has to be changed in the ini's
>>> or
>>> isn't it
>>> implemented yet for the Queen?
>>>
>>> B. rgds
>>> Michel
>>>
>>
>
Similar Threads
-
FS2Phidgets / SIOC variables
By mcdufall in forum FS2Phidget UsersReplies: 2Last Post: 02-14-2011, 05:22 AM -
Variables ?
By spitfire9 in forum FS2Phidget UsersReplies: 7Last Post: 04-23-2010, 08:42 PM -
Using SIOC variables
By MortenHa in forum OpenCockpits General DiscussionReplies: 4Last Post: 12-09-2008, 03:16 AM -
Variables
By BOINET jean luc in forum PM General Q & AReplies: 1Last Post: 01-29-2006, 06:43 AM
Beautiful Womans in your town for night
B_34 TOGA takeoff