Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    MyCockpit Support Staff


    Westozy's Avatar
    Join Date
    Nov 2005
    Location
    Perth, Western Australia
    Posts
    1,412
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    New CNC Forum!!!

    Hi all and welcome to the new CNC forum! (Computer Numerical Control router/milling machines)
    With many of our members now using and discussing CNC machines, we thought it would be a good idea to have a new forum header for CNC machining to keep all the threads in one place. Matt Olieman has set up the forum for us as you see and he has already moved some active threads to the forum, thank you Matt!

    As a new entrant into the world of CNC machining, I am absolutely enthralled with my machine and the results I can now achieve. I wish I had bought one of these machines years ago, it could have saved me countless hours of hand machining and heartache! It is great to be able to get tips and help from those more seasoned than me, and also to share tips that I have learned in my new 'hobby'.

    The next time I see a new cockpit builder asking the "Where do I begin?" question, I will be saying buy a CNC router/mill!!! Thank you to all CNC users for sharing your achievements, knowledge and pictures, keep them coming!

    Regards,
    Gwyn Perrett
    (Westozy)
    Last edited by Matt Olieman; 02-11-2010 at 10:03 AM. Reason: Made this post a Sticky

    737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
    http://www.aerosimsolutions.com.au
    Supporter of MyCockpit.org, please join me in donating!!!

  2. Thanks fweinrebe thanked for this post
  3. #2
    500+ This must be a daytime job



    Join Date
    Jan 2007
    Location
    NEW ZEALAND
    Posts
    899
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: New CNC Forum!!!

    Hi Gwyn,
    Great idea to have a forum for CNC.Been reading your threads and getting great help.Ive recently built my own bench top machine.Just learning slowly how to do things.
    Breaking a few bits along the way.I wished i had bough a machine many years ago.For decades now i have had to cut and file and never been happy with the finish.
    Only cut out twp panels so far but really delighted with the results.Please keep the tips and ideas flowing.really helpful for a beginers like me.
    Thanks again for freely giving your tips.
    Rgds
    Les

  4. #3
    150+ Forum Groupie riche543's Avatar
    Join Date
    May 2008
    Location
    Sydney Australia
    Posts
    248
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: New CNC Forum!!!

    Nice !!! Super Duper Idea ...
    Cheers....

  5. #4
    150+ Forum Groupie flatlandpilot's Avatar
    Join Date
    May 2009
    Location
    Netherlands, Zwolle
    Posts
    150
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: New CNC Forum!!!

    Great to have a seperate CNC forum,
    working on my simpit was my excuse to bought a small Sable table,
    I was thinking about buying the panels "ready from the shop" now
    a few months later I know it was wise to go the milling way,
    it opened my horizon about building things I couldn't do before.

    My table and software:


    Kress 1050-mill
    Solidworks-designing
    Mastercam-toolpath setting
    Mach3-printerport g-code driver
    When once you have tasted flight,
    you will forever walk the earth with your eyes turned skyward

  6. #5
    150+ Forum Groupie twisted8's Avatar
    Join Date
    Jun 2009
    Location
    California
    Posts
    220
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: New CNC Forum!!!

    Good idea with the forum, it all sounds so confusing right now! Time to start learning!

    Has anyone bought one of those $1k CNC routers from china? Are they any good? Sounds like a good price to me but I don't know what specs I should be looking at. Something to build overhead panels.
    http://www.happy-ebuy.com/product_in...roducts_id=254
    Thanks!

  7. #6
    MyCockpit Support Staff


    Westozy's Avatar
    Join Date
    Nov 2005
    Location
    Perth, Western Australia
    Posts
    1,412
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: New CNC Forum!!!

    Hi guys, it is good to have a CNC forum and I'm sure we will all be helping each other out a lot here. I have prepared a tutorial on making backlight panels on the CNC mill using VCarvePro5.5, it should appear on the site next week. I guess the next step is setting up a place where we can share our DXF files etc.

    Cheers, Gwyn

    737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
    http://www.aerosimsolutions.com.au
    Supporter of MyCockpit.org, please join me in donating!!!

  8. #7
    150+ Forum Groupie flatlandpilot's Avatar
    Join Date
    May 2009
    Location
    Netherlands, Zwolle
    Posts
    150
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: New CNC Forum!!!

    $1k CNC routers from china? Are they any good?
    Looks quite like the Sable1020, I think they also use trapezium thread with a spring loaded nut,
    (to be honest only by looking at the price)
    But have a look at the bright side, with a machine like that you have an accuracy better than 0.1 mm.
    and surely can make and remake all the panels you want.

    eventually I'll buy another bigger and more solid machine (for milling aluminium and bigger sizes)
    but I have never regret stepping in for under 1k. (ready to mill)
    When once you have tasted flight,
    you will forever walk the earth with your eyes turned skyward

  9. Thanks twisted8 thanked for this post
  10. #8
    Heli Builder
    Join Date
    May 2008
    Location
    Earth
    Posts
    288
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: New CNC Forum!!!

    I am glad to see a CNC Forum added here on MyCockpit. Well done.

    About 90% complete with building my CNC router. Can't wait to see it move for the first time. Maybe next week. The CNC has been taking up all my cockpit building time. But as a reward the CNC is going to do a lot of cockpit building for me once it is completed.

    Hope to see some very interesting postings here.
    Fritz -> Helicopter Cockpit Builder
    (FSX | TH2Go | Arduino | Air Manager Avionics | CNC)

  11. #9
    Heli Builder
    Join Date
    May 2008
    Location
    Earth
    Posts
    288
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: New CNC Forum!!!

    Quote Originally Posted by Westozy View Post
    Hi all and welcome to the new CNC forum! (Computer Numerical Control router/milling machines)
    With many of our members now using and discussing CNC machines, we thought it would be a good idea to have a new forum header for CNC machining to keep all the threads in one place. Matt Olieman has set up the forum for us as you see and he has already moved some active threads to the forum, thank you Matt!

    As a new entrant into the world of CNC machining, I am absolutely enthralled with my machine and the results I can now achieve. I wish I had bought one of these machines years ago, it could have saved me countless hours of hand machining and heartache! It is great to be able to get tips and help from those more seasoned than me, and also to share tips that I have learned in my new 'hobby'.

    The next time I see a new cockpit builder asking the "Where do I begin?" question, I will be saying buy a CNC router/mill!!! Thank you to all CNC users for sharing your achievements, knowledge and pictures, keep them coming!

    Regards,
    Gwyn Perrett
    (Westozy)
    Gwyn,

    is it possible to have a CNC category in the Image / Video Gallery as well please?

    Regards
    Fritz -> Helicopter Cockpit Builder
    (FSX | TH2Go | Arduino | Air Manager Avionics | CNC)

  12. #10
    Executive Vice President, MyCockpit


    Matt Olieman's Avatar
    Join Date
    Oct 2005
    Location
    Ocala, FL USA
    Posts
    2,883
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: New CNC Forum!!!

    Quote Originally Posted by fweinrebe View Post
    Gwyn,

    is it possible to have a CNC category in the Image / Video Gallery as well please?

    Regards
    Done

  13. Thanks fweinrebe thanked for this post
Page 1 of 2 12 LastLast

Similar Threads

  1. New in this forum
    By Jose Eduardo Berruezo in forum Welcome to MyCockpit New here? Introduce Yourself!
    Replies: 4
    Last Post: 10-01-2007, 02:47 PM
  2. hello, i´m new in this forum
    By mvc340 in forum Welcome to MyCockpit New here? Introduce Yourself!
    Replies: 3
    Last Post: 09-13-2007, 10:42 AM
  3. New to forum
    By craiso in forum General Builder Questions All Aircraft Types
    Replies: 9
    Last Post: 08-21-2007, 09:10 AM
  4. New to forum
    By Martin Cumming in forum Welcome to MyCockpit New here? Introduce Yourself!
    Replies: 2
    Last Post: 06-02-2007, 09:37 AM