Results 1 to 6 of 6
Thread: PCB for EFIS
-
06-23-2009, 12:59 PM #1
- Join Date
- Dec 2008
- Location
- UK/PL
- Posts
- 5
PCB for EFIS
Hello.
2 weeks ago i have bought EFIS_SET from www.symulatory.com but i dont know how to do PCB board which contains all components needed to EFIS like tactile swicthes,
Rotary Switch with tactile switch for changing Type of map and changing distance . And Rotary Switch with encoder and tactile switch for BARO and MINS also with a switches
I have all knobs and all but dont have PCB which i cant made becouse i dont know how to.That all have to be connected for master card(which i have) from Opencockpits also i need a SIOC script for that panel .
If somebody can make this contant me in Private i will be give you a full scale diameters of panel (i use scanner to get corectly diameters of EFIS).
And last thing i put this post in right forum ??
-
06-23-2009, 04:21 PM #2
Re: PCB for EFIS
Check out this link http://personales.ya.com/micabina737...fis/efis1i.htm
You can also download his EFIS PCB layout from there too.
Although a PCB is ideal, it is not absolutely necessary. Just solder the connections and use a BU0386X card (http://www.leobodnar.com/products/BU0836X/) and program the EFIS via FSUIPC.Grant D.
Nelson,B.C. Canada
Win7 32bit, FSX, PM Boeing, TH2GO, GEX, VoxATC
-
06-23-2009, 04:31 PM #3
- Join Date
- Dec 2008
- Location
- UK/PL
- Posts
- 5
Re: PCB for EFIS
I want to use my mastercard becouse i dont know what to do with this :P Bigest problem is this i cant make a rotary siwtch with encoder and push button its to hard for me :P.
-
07-24-2009, 10:00 PM #4
- Join Date
- Dec 2008
- Location
- UK/PL
- Posts
- 5
Re: PCB for EFIS
refresh still waiting for offers !
-
07-25-2009, 12:54 AM #5
Re: PCB for EFIS
It might be cheaper to ask www.symulatory.com to sell you just the PCB then to ask someone to custom design a PCB based on your panel's dimensions. Again, you don't need a PCB you can just solder wired connections to everything. If the encoders are confusing, check out http://www.737ng.co.uk/ Look at the technical and components sections. In terms of the SIOC script what software are you planning on using Project Magenta, PMDG, etc.
Grant D.
Nelson,B.C. Canada
Win7 32bit, FSX, PM Boeing, TH2GO, GEX, VoxATC
-
07-25-2009, 01:53 AM #6
Re: PCB for EFIS
hello olbi........
you can make your own PDB using Veroboard. most components have a 1/10" (2.54mm) pitch between pins or multiples of that. this type of board is punched out at 1/10" so making the circuit is not so difficult if you plan it out.
here's an example......http://www.737ng.co.uk/project22.jpg
hope that helps you out.....
regards .... ianMr. Ian. P. Sissons is hereby recognised as an Honorary Flight Sim Captain following his passing in February 2016. This is in recognition for his commitment to Flight Simulation.
www.mycockpit.org Featured Builder August 2008 www.737ng.co.uk
FS9/PROSIM737/CPFLIGHT/Lots of BU0836X's and a Beer Fridge
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikesautocadplease thanked for this post
Similar Threads
-
fds efis
By David Withers in forum General Builder Questions All Aircraft TypesReplies: 2Last Post: 07-24-2009, 04:58 AM -
Efis
By David7700 in forum I/O Interfacing Hardware and SoftwareReplies: 4Last Post: 12-10-2008, 02:55 PM -
737 efis usb
By kalz in forum OpenCockpits General DiscussionReplies: 0Last Post: 06-30-2008, 09:57 AM
Beautiful Womans in your town for night
B_34 TOGA takeoff