Results 1 to 5 of 5
Thread: 737 Overhead Using Phidgets
-
03-24-2009, 09:40 AM #1
- Join Date
- Sep 2007
- Location
- UK
- Posts
- 31
737 Overhead Using Phidgets
I am considering using the Phidgets interface card(s) for wiring up the overhead.
Has anyone else used these and if so could give me a guide to the number/type of cards they needed and any pros and cons that they experienced that may help.
An alternative would be an Open Cockpits set-up that I have some experience with.
ThanksAndy
-
03-24-2009, 10:15 AM #2
You will need 6 x Phidgetinterfacekit 0/16/16 and 2 x PhidgetLED64.
That is sufficient for both overheads (based on pmSystems that I use.)
Nowadays pmSystems with Phidget cards work swell.
There are several wiring diagrams and connection schemes for this setup available.
Success !
-
03-24-2009, 04:15 PM #3
Works like a charm
Agree with Tony, phidgets work like a charm and integrate very well with PM.
Kester Meijer
http://www.mycockpit.nl - to see my cockpit construction
Certified De-Ice Supervisor EHAM
-
03-24-2009, 06:32 PM #4
- Join Date
- May 2006
- Location
- Belgium
- Posts
- 150
I have tried various interface products, Phidgets is certainly among my favorites. Works great and I had no issues at all.
[
-
03-25-2009, 04:14 AM #5
- Join Date
- Sep 2007
- Location
- UK
- Posts
- 31
Thanks for the response. Phidgets seem to be very straightforward and easy to use.
Andy
Similar Threads
-
Phidgets 0/16/16
By Melnato in forum Phidgets & Cockpit Simulator BuilderReplies: 0Last Post: 07-22-2010, 06:35 PM -
phidgets 64 led
By jackel902 in forum Phidgets & Cockpit Simulator BuilderReplies: 12Last Post: 10-03-2009, 12:34 AM -
phidgets
By 747sim in forum FS2Phidget UsersReplies: 10Last Post: 01-30-2008, 10:19 PM -
Phidgets, AT, and FS9
By Rob Archer in forum PM General Q & AReplies: 8Last Post: 01-11-2006, 04:36 AM