Results 1 to 5 of 5
Thread: VOR and Radial
-
09-06-2008, 06:22 AM #1
- Join Date
- Oct 2007
- Location
- Germany
- Posts
- 39
VOR and Radial
Hi,
if I enter any VOR on NAV1 or NAV2 no green line for the radial is shown. VOR1 or VOR2 on EFIS is set.
Tested as excample by MUN VOR at EDDM 112.30.
Someone with the same result? No VOR shows me the radial.
Regards
Roland
-
01-23-2009, 01:06 PM #2
- Join Date
- Nov 2005
- Location
- Bombay, India VABB
- Posts
- 83
Hi -
try it with the "STA" active on the EFIS - you should see it -
FC
-
01-23-2009, 07:38 PM #3
- Join Date
- Oct 2007
- Location
- Germany
- Posts
- 39
Hi,
it was solved by reinstall the GC.
Regards
Roland
-
04-06-2009, 08:36 AM #4
- Join Date
- Sep 2007
- Location
- Northern Italy
- Posts
- 160
Partially related to this ...
Hi folks !
Did anybody notice that:
- the green dotted radial line on the Capt. ND is centered on the VOR STA tuned on NAV1, according to its COURSE indicator;
- the green dotted radial line on the F/O ND is ALSO centered on the VOR STA tuned on NAV1 (instead of on the VOR tuned on NAV2), and only the COURSE is consistent with the F/O Course selector, but the line is graphically centered on the wrong station ...
It looks like this issue hasn't been (yet) fixed.
Just wanted to know if you can confirm.
Three greens,
EuHappy landings and always three greens !!
Eu
-
09-22-2009, 07:36 AM #5
- Join Date
- Sep 2007
- Location
- Northern Italy
- Posts
- 160
Re: VOR and Radial
Just wanted to bring it up to surface ... anyone else out there experienced this same problem of mine ?
Happy landings and always three greens !!
Eu