Results 11 to 17 of 17
Thread: TH2GO-D questions
-
08-21-2008, 04:55 PM #11
Yeah, I will run the 1024x768 down in the next day or so to 800x600 to see how much difference there is and then that will tell the tale. Also, my 'BIG' question was more rhetorical, but that's what I was looking for as a response- Bigger field of view but less resolution!
-
08-21-2008, 08:46 PM #12
I have TH2Go-D with GTS 8800 on a 2.4GHz quadcore, with every slider maxed on FS9 with PMDG on XP pro, it easily achieves 40FPS and is absolutely smooth as silk even with heavy weather running.
Gwyn
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
http://www.aerosimsolutions.com.au
Supporter of MyCockpit.org, please join me in donating!!!
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
Tomlin thanked for this post
-
08-22-2008, 06:37 AM #13
I run mine in Windowed mode because I have never been able to get it working correctly otherwise. I might be missing something but it doesnt really bother me.
To answer the question about the outside edges missing, this is caused by the bezel management feature of TH2GO. In order to compensate for the monitor bezels spacing, you adjust the outer two screens inward until all three screens line up as if the bezels werent splitting them up. This takes away from the outermost screens. Key is to get monitors with as small of bezels as possible to minimize this. You wouldnt need to worry of course if using projectors.
I did have a lot of issues when I first got my unit and was using some old CRTs with the DVI adapters. Once I got all my new monitors (all with DVI connections), I stopped having the issues. Also had problems connecting through USB hub and ended up putting right to one of my mb ports. Finally, there was a firmware update needed which I had to request (they dont post it). Just some small nuiances but over all I am thrilled with the final outcome.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
Tomlin thanked for this post
-
08-22-2008, 06:48 AM #14
One more thing to know if you get TH2GO.
All of the runway lighting and aircraft outside lighting will be bloated and miserable looking. I messed with this for a long time and finally got frustrated and started googling around and finally found the fix. There is a post by Philb737 on this forum related to the issue. you can also google Brian Neitzels and aht5.zip. Once I made these changes all was good again in the world.
Scott
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
Tomlin thanked for this post
-
09-01-2008, 12:31 PM #15
two cards
I Have TH2GO with an 8800GTS nvidia, it works very fine, but i want to know if i can put another Graphics Card (I've an ATI RADEON 2600 HD PRO ) in my remain PCI-E empty slot for instruments. It's possible?
Thanks
-
09-01-2008, 12:35 PM #16
-
06-16-2009, 04:03 PM #17
- Join Date
- Oct 2008
- Location
- Europe
- Posts
- 24
TH2GO-D questions
Hi,
Can anyone tell me on how I can change the views on my monitors?
I've just installed a TH2GO-Dig with 2 screens. (Will use it later to attach 3 projectors to create a 220 FOV).
Now I'm having the FWD Left window on the left screen and the Front Window (capt) on the right.
I trying to get the Capt. window on the left and F/O on the right so that the center bezels are in the middle of the cockpit.Geert
-----------------------------------
If it ain't a boeing, I'm not flying!
http://flightsim737.dyndns.org:8081
Similar Threads
-
TH2Go and FSX - A couple of questions
By airwolfe in forum General Builder Questions All Aircraft TypesReplies: 3Last Post: 04-22-2013, 09:58 AM -
More than one TH2GO on one PC anyone?
By brynjames in forum Computer Hardware SetupReplies: 1Last Post: 10-05-2008, 07:10 AM -
Th2go
By mounty in forum Cockpit Outside VisualizationReplies: 3Last Post: 10-14-2007, 03:54 PM
Hi...realize this has been a long time, but I'm heading down the path of building my own 777...
B777 Overhead Panel Design