Results 1 to 2 of 2
Thread: USBkeys card problems
-
06-02-2008, 11:19 AM #1
- Join Date
- Aug 2007
- Location
- Schorndorf/Germany
- Posts
- 50
USBkeys card problems
Hi all !
I have a problem with usbkey card.
I build a CDU with the USBkey card .
On one PC i`m running sioc withMCP/EFIS/Mastercard and script for cdu.
the CDU(USBkeycard) is connected on other PC
I have software similar to PM and have offset for FMC keys.
On CDU PC IOCkeys.exe is installed also widefs-client
When i start IOCkeys.exe it say in window that it is connected and running.
On the other PC where sioc runs with cdu-script it says one IOCP-client connected.
So far SIOC-PC sees USBkey-card on CDU-PC
When i press a key nothing changes in CDU software.
But when i run SIOC too on the CDU PC with cdu-script all works fine.
What am i doing wrong?
Any help appreshiated!
Greetings George
-
06-28-2008, 01:55 PM #2
You may have to have them all running on the same computer? Or maybe to I.P addresses aren't correct?
John
System:
ASUS P5Q SE/R
Intel Q9550 O/C to 3.4 GHz
4 GB 1066 DDR2 RAM
300 GB WD 10,000 RPM Raptor SATA Drive
GeForce 8800 GT 512 KB RAM
Matrox TH2Go with three 19" Sumsung 940 BX
IR Track 4
Similar Threads
-
OC USBKeys card not recognized in windows 7
By Jasmckee in forum I/O Interfacing Hardware and SoftwareReplies: 29Last Post: 10-13-2010, 03:56 AM -
USBKeys Card
By Boeing 747 Flyer in forum General Builder Questions All Aircraft TypesReplies: 13Last Post: 06-06-2010, 08:00 AM -
Need Help for OpenCockpits USBKeys card programming
By SimStar001 in forum I/O Interfacing Hardware and SoftwareReplies: 1Last Post: 01-03-2009, 07:43 AM