Results 11 to 14 of 14
-
08-01-2007, 09:10 AM #11
I don't mind the hole in the center, as the ears on the sides that are supposed to hold it will cover it up. The problem is that the ears on the end of the shaft on my mechanism are not real.
They are only there for looks. They are filed and fitted to the end of the shaft and attached with Loc-Tite 401. They would not support the stress of operating the gear handle.
Can you machine from aluminum an extremely short shaft extension with the ears for the wheel that screw to the end of the existing shaft? It would have to be of the same diameter as the existing shaft. With a little filling and sanding I could make it seamless.
Only that way could I use a wheel that is axially mounted. Let me know if that is possible. Adding 12mm or so to the length of the shaft shouldn't look too out of place.Boeing Skunk Works
Remember...140, 250, and REALLY FAST!
We don't need no stinkin' ETOPS!
Powered by FS9 & BOEING
-
08-01-2007, 06:32 PM #12
Can do Mike, can you send a sketch of exactly what you want?
Gwyn
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
http://www.aerosimsolutions.com.au
Supporter of MyCockpit.org, please join me in donating!!!
-
08-01-2007, 10:07 PM #13
Can do. Might be a day or three as I'm not off again until next Monday.
Boeing Skunk Works
Remember...140, 250, and REALLY FAST!
We don't need no stinkin' ETOPS!
Powered by FS9 & BOEING
-
08-02-2007, 04:19 AM #14
Rgr, copy that...
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
http://www.aerosimsolutions.com.au
Supporter of MyCockpit.org, please join me in donating!!!
Similar Threads
-
737 reverser handle
By ivar hestnes in forum General Builder Questions All Aircraft TypesReplies: 0Last Post: 04-11-2009, 06:18 PM -
WTB: Landing gear handle
By gokhotit in forum Phidgets & Cockpit Simulator BuilderReplies: 0Last Post: 11-30-2004, 02:22 AM -
Gear Handle question
By wchambers in forum FS2Phidget UsersReplies: 5Last Post: 11-26-2004, 11:59 AM -
Gear handle question
By wchambers in forum Phidgets & Cockpit Simulator BuilderReplies: 1Last Post: 11-23-2004, 01:49 PM
Girls in your town
A320 Sound Files Missing