Results 1 to 7 of 7
-
03-26-2007, 11:50 AM #1
- Join Date
- Jan 2007
- Location
- Italy
- Posts
- 204
GC 737 EICAS value slow bug!!!
Hi, i have problems with the eicas screen (737) values, i noted that they are updated to slowly, for example when i start theEngine at N2 46% the starter switch returns to off, if you monitor the 737 default panel and PMsystems it's is triggered correctly, but in eicas page N2 increasing i very slowly (other values also, EGT etc.), i have tried all wideclient settings, but is not a problem with it, infact i discovered that it happens also in the same machine as FS is running!
This is very strange, 'cause i want to monitor the N2 values correctly, and when my solenoid is triggered, N2 values is still behind!
Can you look further?
**mailed to PM support!
-
03-26-2007, 01:10 PM #2
- Join Date
- Jan 2007
- Location
- Italy
- Posts
- 204
Got a reply from PM, playing with those values seems to solve the problem:
N1StartupDelay=0
N2StartupDelay=0
-
03-26-2007, 01:25 PM #3
- Join Date
- Oct 2005
- Location
- Holley, New York U.S.A.
- Posts
- 1,776
Thanks for sharing the response! It is a good idea to share what you hear from PM.
Bob Reed
-
03-26-2007, 01:33 PM #4
- Join Date
- Jan 2007
- Location
- Italy
- Posts
- 204
A correction about 46% value,
Starter cutout is approx 46% N2 -3/4/500; 56% N2 -NG's.
-
03-27-2007, 02:28 PM #5
-
03-27-2007, 02:30 PM #6
- Join Date
- Oct 2005
- Location
- Holley, New York U.S.A.
- Posts
- 1,776
The ini file for the copy of PM that runs the ECIAS.....
Bob Reed
-
03-27-2007, 04:37 PM #7
- Join Date
- Jan 2007
- Location
- Italy
- Posts
- 204
No, in the aircraft type .txt in GC or CDU it depends if you have set Type=CDU or not.
Similar Threads
-
Slow Servo motor
By cesarfsim in forum OpenCockpits General DiscussionReplies: 3Last Post: 04-21-2008, 08:55 AM -
PM eicas display with aerosoft eicas hardware
By npbosch in forum PM Boeing GCReplies: 7Last Post: 10-03-2007, 08:37 AM -
PM eicas display with aerosoft eicas hardware
By npbosch in forum PM General Q & AReplies: 7Last Post: 10-03-2007, 08:37 AM -
Slow thrust
By 3202b in forum PM General Q & AReplies: 4Last Post: 02-08-2007, 04:11 PM
Hi...realize this has been a long time, but I'm heading down the path of building my own 777...
B777 Overhead Panel Design