Results 1 to 10 of 14
Thread: CDU 387c bugs!
-
02-19-2007, 05:15 PM #1
- Join Date
- Jan 2007
- Location
- Italy
- Posts
- 204
CDU 387c bugs!
I tried the latest build and those are the problems experienced:
(using navdata from PM latest build page)
- When selecting SID or Star the fisrt time the CDU remains black with only the title page, so i clicked Dep/Arr key again!
- Route insertion problem see the LEGS page!. Route: LIME to LIEA, TZO dct GEN UM858 AJO dct CORSI, SID TZO5R, STAR CORSI1A.
- Step in PLAN MODE continue to not work!
- HOLDING not displayed and not working correctly, during my flight i inserted a fix to hold it is TORTU280/15 clicked on F1 for inserting it before TORTU, it was ok but after i clicked to HOLD the waypont displayed is TORTU and no way to HOLD at TORTU01 !!!??? Also the exit armed mode not work, and during hold at tortu(not the 01) my route waypoint on ND disappeared, they resume to display after exited the hold!
Guys do you experienced problems?
-
02-20-2007, 05:17 AM #2
When I select a SID or STAR, the CDU remains blank for a while, but then it comes back. There is also a delay before the route modification appears in NAV. I think that is normal, because some number crunching must be happening in the background...
Can't comment on the rest; I havn't done any holdings lately...
Hans
-
02-20-2007, 11:42 AM #3
- Join Date
- Jan 2007
- Location
- Italy
- Posts
- 204
Enrico has just sent to me an update of CDU ang GC, i will look into it and report!
Thank you Enrico!
-
02-21-2007, 12:41 PM #4
- Join Date
- Jan 2007
- Location
- Italy
- Posts
- 204
After a try of the new beta builds, i post this to keep you up to date:
Email to PM support:
Hi Enrico i have tried the updates and prepared a list of bugs, some are:
GCockpit bugs:
1) NAV EFIS mode disagree not always displayed, for example if i'm on ground and tune an ils freq and swith to vor mode the messange is not shown
2) FS2004 panel gauge for MCP not switching mode correctly (APP,vor, etc) previously it was working
3) PFD remain Displayed prior to IRS POS INIT
--------------------------------------------
CDU BUGS (more will follow, i have list at home, those are what i remember)
1) HOLD FIX problem persist as previous message
2) During Cruise sometimes WPT ABOVE CRZ ALTITUDE message appears
3) Temporay modification on the Flight Plan are executed without pressing Exec
4) Changing Arrival rwy during flight the flight plan is messed up and the plane goes back to some waypont.
5) Impossible to Activate Vspees without inserting Arrival rwy
6) When selecting Arrival RWY i can't select RWY EXTensions (for non ILS approach)
7) Temp plan not shown on PFD
8 ) Route page, LIMC-35R via RMG6G.AOS8J, can't delete Disco, if deleted FP disappear.
Good Points:
I saw Trim and CG calculation where correct on CDU i compared to Table of AOM (Well Done)
Wish List:
1) Will be good if in Map mode we can see the radials selected on course of a station (like pmdg)
Can you confirm?Last edited by dcutugno; 02-22-2007 at 01:22 PM. Reason: Added full list of bugs and Wish List
-
02-22-2007, 01:24 PM #5
- Join Date
- Jan 2007
- Location
- Italy
- Posts
- 204
List Updated! and a wish list added.
I'm the only one with those problems?
-
02-22-2007, 02:01 PM #6
- Join Date
- Jan 2007
- Location
- s/w germany
- Posts
- 126
Hi.
iam a little confused, because ou write something about trim calculation and trim settings, but i cant find it in the cdu?!
Thomas
I saw Trim and CG calculation where correct on CDU i compared to Table of AOM (Well Done)
-
02-22-2007, 02:53 PM #7
- Join Date
- Jan 2007
- Location
- Italy
- Posts
- 204
I have a build that was emailed to me from Enrico and i think is not the one in the web, like an Alpha one.
Those are my tought! not sure.
Just after i inserted all the data it comes out with the trim settings.
-
02-22-2007, 05:14 PM #8
- Join Date
- Jan 2007
- Location
- s/w germany
- Posts
- 126
ok, in understand it. Will the wrong trim scale in GC also fixed with this new cdu build?
Thomas
-
02-22-2007, 05:44 PM #9
- Join Date
- Jan 2007
- Location
- Italy
- Posts
- 204
Not yet, sorry and don't know if it will, i hope
-
02-22-2007, 05:48 PM #10
- Join Date
- Jan 2007
- Location
- s/w germany
- Posts
- 126
hi,
ok, but i ask myself how can i find the correct trim setup for takeoff without a working scale? Is there another way that i dont know?
Similar Threads
-
FCU Reported Bugs and Missing Features
By luisgordo in forum PM Airbus FCUReplies: 0Last Post: 07-06-2008, 04:12 AM -
GC Reported Bugs and Missing Feautures
By luisgordo in forum PM Airbus GCReplies: 0Last Post: 07-06-2008, 04:11 AM -
PM Bugs
By Matt Ford in forum PM General Q & AReplies: 1Last Post: 01-21-2006, 10:11 AM -
Project Magenta Circle & other new bugs
By Matt Ford in forum PM General Q & AReplies: 6Last Post: 01-18-2006, 01:13 PM
Enter and win!
JeeHell FMGS on a remote Computer