Results 131 to 140 of 460
Thread: A320 FMGS B52
-
06-25-2019, 06:47 AM #131
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: A320 FMGS B52
FSx or p3d?
-
06-25-2019, 06:53 AM #132
Re: A320 FMGS B52
Sorry, p3d 4.5 .
P3D V5 HF1 - PC spec: Intel i5-6600K, 16 GB DDR4 2400, GPU Nvidia GTX1070ti, M2 SSD NVme, JH FMGS, GSX, ASP3D+ASCA+ENVSHADE
-
06-25-2019, 06:17 PM #133
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: A320 FMGS B52
check you haven't inadvertently installed an unused hardware module. Last update brought "symulatory/poldragonet support", by default it was probably selected for installation. If so delete the DLL in c:\A320FMGS\hardware modules (on any computer where it may be installed).
-
06-26-2019, 03:16 AM #134
Re: A320 FMGS B52
i'll chek soon. thanks
P3D V5 HF1 - PC spec: Intel i5-6600K, 16 GB DDR4 2400, GPU Nvidia GTX1070ti, M2 SSD NVme, JH FMGS, GSX, ASP3D+ASCA+ENVSHADE
-
06-26-2019, 08:48 AM #135
Re: A320 FMGS B52
JL, i checked the hardware modules directory :
Main PC (FGMS Server + OVH Panel + all hardware) :
CockpitSonic.ini
EHIDModule.dll
FSUIPCModule.dll
SkalarkiIO.dll
On Slave PC (ND/PFD/ED/SD) i don't have any Hardware Modules dir (is it normal?)
I use a Saitek Throttle for the TQ at moment.P3D V5 HF1 - PC spec: Intel i5-6600K, 16 GB DDR4 2400, GPU Nvidia GTX1070ti, M2 SSD NVme, JH FMGS, GSX, ASP3D+ASCA+ENVSHADE
-
06-27-2019, 03:04 AM #136
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
-
06-27-2019, 03:04 AM #137
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
-
06-27-2019, 04:12 AM #138
Re: A320 FMGS B52
Hi JL, the hardware seems ok.
I checked it by fgms configuration and i recalibrated it.
FGMS recognizes the TQ are moving, but the power remains at 0.
In any case , i try to reinstall the old version B50 so i can try if the problem is the B52 or not.
Thanks for your supportP3D V5 HF1 - PC spec: Intel i5-6600K, 16 GB DDR4 2400, GPU Nvidia GTX1070ti, M2 SSD NVme, JH FMGS, GSX, ASP3D+ASCA+ENVSHADE
-
06-27-2019, 05:03 AM #139
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: A320 FMGS B52
You only use the saitek TQ as hardware? What about the Skalarki and cockpitsonic modules installed??
-
06-27-2019, 05:26 AM #140
Re: A320 FMGS B52
Hi JL, i have still the issue that the estimated time computations of the MCDU in the FP are incorrect. I took another leg from LFMN to EDDH, take off was at 10:30 UTC and the MCDU gave me an ETA at EDDH of 23:50 once when i was airborned. While flying the MCDU constantly computed the ETA at EDDH down and just when i was on final the ETA matched the actual UTC. Same for the ETAŽs of each waypoint in the FP.
Do you have any idea what could be wrong?
IŽam using P3d 4.5, and the FMGS is running on a dedicated Server.
One more Question: In the real Airbus you can put an estimated take-off time in the MCDU FP at the Departure-Airport. You doing this by select the Departure ICAO in the FP via the LSK and then you can put in the ETD. Is this Funktion implemented? I tried it but i get the message "not allowed" in the scratchpad. Just ask.
Beautiful Womans in your town for night
B_34 TOGA takeoff