A320 FMGS B49

[pete_fuss]

Hello JL,

i have the problem with the EGT needles too!


regards Peter

[Mitch95]

Hello Fritz,

Thank you for your feedback !

So, at this time, I will continue to use 5.0.1440.1000...
As far as I know, Marcin regularly have looks to this topic ; I hope he will not forget the TQ 2012 users...

Regards,
Michel

[Mitch95]

And I can now confirm that TQ 2012 stepper motor is working in flight with 5.0.1440.1000 Skalarki Profiler and JeeHell B49.1 !

Regards,
Michel

[imported_Suggy]

Version 49.1 was a bad update for me as the a/c kept belly flopping back onto the runway when I attempted to take off. When I managed to wrestle it into the air, it kicked off numerous warnings etc to the extent it became unflyable.

Also, for some reason, SIOC wouldn’t work when the sound module ran from a different computer.

Reverted back to v49.0 and everything is working again just fine.

On another note, is anybody having success running the FMGC on a separate computer? If so, what is the computer’s specs? I’ve noticed running the server on the P3D computer can reduce the FPS by as much as 20 FPS.

Kind regards,
Darren Sugden

[Barrykensett]

All above same for me. Have tried running server on a dedicated PC but the control lag makes it unflyable. If anyone has managed it can you give idea of computer specs needed?
Barry
www.a320sim.com

[spiliot]

In 49.1 when the engine is idling in the air XX is displayed in fuel flow.

[dkreiskott]

Version 49.1 was a bad update for me as the a/c kept belly flopping back onto the runway when I attempted to take off. When I managed to wrestle it into the air, it kicked off numerous warnings etc to the extent it became unflyable.

Also, for some reason, SIOC wouldn’t work when the sound module ran from a different computer.

Reverted back to v49.0 and everything is working again just fine.

On another note, is anybody having success running the FMGC on a separate computer? If so, what is the computer’s specs? I’ve noticed running the server on the P3D computer can reduce the FPS by as much as 20 FPS.

Kind regards,
Darren Sugden

yes, I,m running Jeehell as a dedicated Server and have no problems.

I'm using a Fujitsu Esprimo 9000 as i5, look at: https://sp.ts.fujitsu.com/dmsp/Publi...000-estar5.pdf

Regards Dieter

[imported_Suggy]

yes, I,m running Jeehell as a dedicated Server and have no problems.

I'm using a Fujitsu Esprimo 9000 as i5, look at: https://sp.ts.fujitsu.com/dmsp/Publi...000-estar5.pdf

Regards Dieter

Thank you,
Darren

[dkreiskott]

Hi all,

one question. Is there any A320 Model for FSX with IAE Engines available?

Regards Dieter

[Leonidas]

Hi
I think ABEAM PTS don't work. It shows the new waypoints on the previous route, not on the shortcut one.
Regards