A320 FMGS B49

[dkreiskott]

Hi JL,

I do a quick test.

The Route IS "EDDL MEVEL Y850 BASUM Z78 WSN T903 RIBSO EDDF.
No STAR no SID

First I enter EDDL/EDDH in the MCDU an fill FLT NBR, CRZ and CI (Pic1)
Then I input the Route (PIC2)

In the next step I save the Route as CO RTE, see PIC3

In PIC4 you can see, it is saved as PILRTE, OK

I edit the corte.xml and replace PILRTE with CORTE.

After I load the CO RTE in the MCDU I have no flight plan. You can see the result in PIC5.

I don't understand this behavior. Please tell me what's wrong. I think this is not right.


And this is my corte.xml (No FLT NBR, CI and CRZ FLT)

<CORTE ID="EDDLEDDH01" TYPE="CORTE" FROM="EDDL" TO="EDDH" FLTNBR="NONE" CI="NONE" CRZFL="NONE">
<DEPARTURE RWY="NONE" SID="NONE" TRANS="NONE"/>
<LEG SEQ="0" TYPE="DIR" WPT="MEVEL"/>
<LEG SEQ="1" TYPE="AWY" ID="Y850" WPT="BASUM"/>
<LEG SEQ="2" TYPE="AWY" ID="Z78" WPT="WSN"/>
<LEG SEQ="3" TYPE="AWY" ID="T903" WPT="RIBSO"/>
<ARRIVAL TRANS="NONE" STAR="NONE" VIA="NONE" APPR="NONE"/>
<ALTN ICAO="NONE" ID="NONE"/>
</CORTE>

[jpromeroa]

Hi JL,

I have found an other glitch, regarding the ECAM: ENG 1/2 FAIL at takeoff, it does not appear all the ECAM actions but after almost 2000 feet AGL. Also right after the engine fail the page of ELEC appears in the lower ECAM display.

Regards,
JP

[dkreiskott]

Hi Jean Luc,

I have done several tests. In fact, the behavior is a bit different from what I described yesterday.


The reason flight schedules are not loaded is when the departure runway is missing. Not SID or STAR.


I have saved a route EDDL - EDDR with all waypoint and the departure runway EDDL 05R. The flight plan is loaded, but also has another error


EDDR is replaced by EDDR27. And before EDDR27, a waypoint is inserted with the designation CF 27.


That's not all right. And I think the departure runway has no place in the company route.
I can discuss that with a real Airbus pilot on Saturday.


It would be nice if you give an answer.

here is the corte.xml for this route:

<CORTE ID="EDDLEDDR01" TYPE="CORTE" FROM="EDDL" TO="EDDR" FLTNBR="DLH281" CI="45" CRZFL="250">
<DEPARTURE RWY="05R" SID="NONE" TRANS="NONE" />
<LEG SEQ="0" TYPE="DIR" WPT="MODRU" />
<LEG SEQ="1" TYPE="AWY" ID="Z283" WPT="SUMAS" />
<LEG SEQ="2" TYPE="AWY" ID="UZ283" WPT="LNO" />
<LEG SEQ="3" TYPE="AWY" ID="L607" WPT="ROPUV" />
<LEG SEQ="4" TYPE="AWY" ID="Q760" WPT="TOMPI" />
<ARRIVAL TRANS="NONE" STAR="NONE" VIA="NONE" APPR="NONE" />
<ALTN ICAO="NONE" ID="NONE" />
</CORTE>

[jeehell]

Ill check this runway issue.
But I am pretty sure you can have SID.STARS in the co route.

[dkreiskott]

Ill check this runway issue.
But I am pretty sure you can have SID.STARS in the co route.

Hi JL,

It's possible, I don't know.
I will be able to clarify this on the weekend with a real Pilot.
But Runway, SID and STAR are dependent on the weather?
I this case it is necessary to change the comany route after loading?

Regards Dieter

[michael1508]

Hi all,

just downloaded B49,but on opening the file a Windows error says something like "unable to access file ... maybe no access rights".Then the file disappears from the folder! Very strange!!!

I tried also with admin rights, with another pc, via update Routine and manuel download. Nothing helped...

Can you help?

Michael

[Leonidas]

Hi all,
just downloaded B49,but on opening the file a Windows error says something like "unable to access file ... maybe no access rights".Then the file disappears from the folder! Very strange!!!
I tried also with admin rights, with another pc, via update Routine and manuel download. Nothing helped...
Can you help?
Michael

May be a security app (antivirus etc) running at the backround to do that...

[michael1508]

May be a security app (antivirus etc) running at the backround to do that...

That was it! Thanks!

[Migelito]

Ill check this runway issue.
But I am pretty sure you can have SID.STARS in the co route.

Co routes are created by the operator for everydays use and do therefore not contain SID/STAR/APP (don´t know if it would be technical possible). The PF calls up the co route and adds SID/STAR/TRANS/APP according situation.

Pilots routes can contain SID/STAR/APP of course (but everything will be lost after power off/power on to the A/C)

PERF data will never be safed in both cases (as safety precaution to avoid using wrong data)

Hope this helps a bit
Nice greets
Michael

[dkreiskott]

Co routes are created by the operator for everydays use and do therefore not contain SID/STAR/APP (don´t know if it would be technical possible). The PF calls up the co route and adds SID/STAR/TRANS/APP according situation.

Pilots routes can contain SID/STAR/APP of course (but everything will be lost after power off/power on to the A/C)

PERF data will never be safed in both cases (as safety precaution to avoid using wrong data)

Hope this helps a bit
Nice greets
Michael

Hi Michael,

I think you are right, in my opinion there is no reason to save SID / STAR or APP in a co rte.

Regards Dieter