A320 FMGS B42/43

[jeehell]

which cycle do you use?
what are the names of the 5 bin files you have?
are you sure you updated to the last automatic update available?

[Pim van Vrijaldenhoven]

which cycle do you use?
what are the names of the 5 bin files you have?
are you sure you updated to the last automatic update available?

The version is: JHW150601
The files are: arpt.bin, awy.bin, fix.bin, mkr.bin and navaid.bin. There are no other .bin files in the navaid folder.

Of course, everything is the latest version. In MCDU the waypoints and airways work just fine.

Best regards,

--pim

[jeehell]

Are you actually able to get SID/STAR/APPR???
You have a problem way before the ND display, at the compiling process, for an unknown reason... As long as you don't have 9 bin files, the ND will not show the VOR/NDB/etc.

It seems it stops compiling while working on the holding patterns, which is weird. It could happen if you somehow try to close the server, but from what you say this is not the case.


Did you try downloading again the navdata file?
You have a navrecord file in both navdata1 and 2 folders on your Server computer?

JL

[jeehell]

i put a very quick update for this problem, report with the logndb.txt if you still only have 5 files.

[OmniAtlas]

I also could not get waypoints for 1506 cycle. Try the 1510 cycle.

[SimStar001]

@simstar: another user just told me he had the same issue, he said running the software FCU solved it, but I have doubts about that. Do you have the software FCU running or not?

JL

Nope, I always running the whole software. FCU is running remote on other PC... going back to Version 41.2 all is working!

Regards Marco

[Pim van Vrijaldenhoven]

i put a very quick update for this problem, report with the logndb.txt if you still only have 5 files.

Hallo Jean-Luc,

I installed the update and it still generates only 5 .bin files with the 1506 airac.

Best regards,

--pim

[Pim van Vrijaldenhoven]

Hallo Jean-Luc,

I just installed 1510 and I get all the .bin files. EDIT: All is working now!!!!

Best regards,

--pim

*11:03:08* Navdata module launched Server
*11:03:08*
*11:03:08* -BGL scan:
*11:03:08* -ScenerycfgPath:C:\ProgramData\Lockheed Martin\Prepar3D v2\scenery.cfg
*11:03:08* -FSroot:P:\P3D\
*11:03:08* -Folders Nb:182
*11:03:29* -FS ILS Nb:6362
*11:04:49*
*11:04:49* Navdata1:
*11:04:49* -ARPTliste:13545
*11:04:49* -NavaidListe:17401
*11:04:49* -FIXliste:182613
*11:04:49* -AWYsegments:96194
*11:04:49* -Holds:19202
*11:04:49*
*11:04:49* Navdata2:
*11:04:49* -ARPTliste:13545
*11:04:49* -NavaidListe:17401
*11:04:49* -FIXliste:182613
*11:04:49* -AWYsegments:96194
*11:04:49* -Holds:19202
*11:04:49*
*11:04:49* server started on port:8006

[OmniAtlas]

Can we conclude the free dataset has some sort of problem?

[jeehell]

Well it does work for me...