Results 131 to 140 of 261
Thread: A320 FMGS B36
-
11-18-2014, 06:58 AM #131
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: A320 FMGS B36
As I said earlier in the thread: "MsgListMutexMain1 timed out" is not a problem, it's an indication and should not cause any crash/loss of communication. Unless you have it hundreds of times...
If you're using windows8, you want to check everything runs under the same privileges (I suggest you force "run as admninistrator" on ALL applications).
JL
-
11-18-2014, 05:12 PM #132
- Join Date
- Mar 2012
- Location
- Brescia, Italy
- Posts
- 16
Re: A320 FMGS B36
Perfect, the display are back to work after the update.
Thank you again!
Stefano
-
11-18-2014, 05:13 PM #133
- Join Date
- Jun 2011
- Location
- paris
- Posts
- 33
Re: A320 FMGS B36
Tout semble réglé. Merci beaucoup.
Pierre
-
11-23-2014, 02:15 PM #134
- Join Date
- Aug 2009
- Location
- Vienna
- Posts
- 66
Re: A320 FMGS B36
Hello,
my modules on the networked computer lose their connection to the fmgs server after several seconds.
my setup:
fsx pc:
FMGS Server
FBW module
Widefmgs server
VRInsight Airbus FCU (hardware instead of the software fcu)
remote pc:
overhead
both mcdus
cpt pfd
cpt nd
sd
ewd
widefmgs
The widefmgsserver says that all ports are connected and when i start the remote pc's starter, the fmgs server says that all modules on the remote pc are connected, but after some seconds (10-15) they lose connection..
I did not change anything except updating the fmgs to 36.3 on both pcs.
thank you!
markus
-
11-23-2014, 03:04 PM #135
- Join Date
- Feb 2013
- Location
- EDDG
- Posts
- 71
Re: A320 FMGS B36
I also had today Connection problems. In have one server with 3 Clients. It seems that the Clients loose their connections and not coming Up again when Server was Down. I also didn't change other configs, only 36.3 with last autoupdate.
-
11-23-2014, 03:32 PM #136
- Join Date
- Aug 2012
- Location
- New Zealand
- Posts
- 124
Re: A320 FMGS B36
Hey Markus
I see you have the VRI FCU and use it with this software... i have one too but cant figure out how to combine the two... would you be so kind as to help me with the process?
Very grateful for your help mate
Regards
Doug
-
11-23-2014, 06:02 PM #137
Re: A320 FMGS B36
Hi Jean Luc,
Tonights flight after updating to latest FMGS 36.3.
- CockpitSonic RMP digits are now correct again
- Had a connection problem which required restart of the OH and MCDU - both on my non-FS PC. This resulted in a complete mid-air shutdown of the aircraft with obvious high workload for the pilot as a consequence. (see log below - network consists of all new network switches). Is there a way to avoid a complete restart of the client PC items?
- An odd new problem that may originate from JeeHell: After some time the joystick hat which passes non used by Jeehell to P3D no longer works. Likewise the trigger on my Joystick assigned to dual brakes does not pass through as held continously. Any thoughts on what this can originate from?
Thanks
/Stephen
WideFMGS server Log.port 8005:192.168.1.113 connected
port 8003:192.168.1.113 connected
port 8008:192.168.1.113 connected
port 8006:192.168.1.113 connected
MsgMutexMain1 timed out
MsgMutexMain1 timed out
MsgMutexMain1 timed out
MsgMutexMain1 timed out
MsgMutexMain1 timed out
MsgMutexMain1 timed out
MsgMutexMain1 timed out
MsgMutexMain1 timed out
MsgMutexMain1 timed out
MsgMutexMain1 timed out
port 8008:192.168.1.113 disconnected
port 8005:192.168.1.113 disconnected
port 8003:192.168.1.113 disconnected
port 8006:192.168.1.113 disconnected
Fpln OnError
port 8005:192.168.1.113 connected
port 8003:192.168.1.113 connected
port 8006:192.168.1.113 connected
port 8008:192.168.1.113 connected
MsgMutexMain1 timed out
port 8005:192.168.1.113 disconnected
port 8003:192.168.1.113 disconnected
port 8008:192.168.1.113 error
port 8008:192.168.1.113 disconnected
port 8006:192.168.1.113 disconnected
Fpln OnError
port 8005:192.168.1.113 connected
port 8003:192.168.1.113 connected
port 8008:192.168.1.113 connected
port 8006:192.168.1.113 connected
MsgMutexMain1 timed out
MsgMutexMain1 timed out
MsgMutexMain1 timed out
MsgMutexMain1 timed out
MsgMutexMain1 timed out
MsgMutexMain1 timed outCheers Stephen
P3Dv4 Prof, FMGS A320, 1080p OH for ext. & 1080p 24" for int., TM Warthog, VATSIM (vPilot)
-
11-23-2014, 06:33 PM #138
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: A320 FMGS B36
Hi,
Try to copy the navdata folder which is on your server computer into the client's (really jsut copy the FMGS\navdata folder with all it's contents). And tell us if you still get disconnections.
Regards,
JL
-
11-23-2014, 06:34 PM #139
- Join Date
- Aug 2009
- Location
- Vienna
- Posts
- 66
Re: A320 FMGS B36
Hello,
i have the same message: "Fpln OnError"
then the connection of the remote modules is lost (fmgs server says "not connetcec") although the widefmgs says that all connections are still up and working
greetings
markus
-
11-23-2014, 07:19 PM #140
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: A320 FMGS B36
@stubenflieger: My last message applies to you also.
@all: I just put a new update: from now on, the nadvdata auto transfer from server to clients is no longer supported. You must put the navdata yourself on all your computers. If you do not do it, then NDs will not show any VOR/WPT/ARPT/NDB
Regards,
JL
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 DislikesSSO thanked for this post
Search Pretty Girls from your town for night
JeeHell FMGS on a remote Computer