A320 FMGS B31

[Leonidas]

No difference in regard to which situation? no conenction to server or still OOM? Please try to be a bit more descriptive...

Still Out Of Memory.

[jeehell]

Did you run the EIS with a delay between for example PFD and ND, or did you run them both roughly at the same time? i.e. did you try waiting for a few minutes?

[Leonidas]

Did you run the EIS with a delay between for example PFD and ND, or did you run them both roughly at the same time? i.e. did you try waiting for a few minutes?

Yes, I wait between them. I run now a Windows update for the 3 clients like our friend said and I see that there are some of them. So, after completion I'll test them again and let you know probably tomorrow. Thanks a lot JL.
Regards

[jeehell]

OK. If it still does not work, please give me a complete description of the softwares running on that computer.

JL

[Leonidas]

OK. If it still does not work, please give me a complete description of the softwares running on that computer.

Good morning JL
It didn't work. I tried with manual starting too. I'm sending three screenshots for Add Remove Programs and Device Manager of my XP clients, so you can have an idea about the software running there.
RegardsAddRemove1.jpgAddRemove2.jpgDeviceManager.jpg

[jeehell]

And what part of my software is running on that computer? only EIS and wideFMGS client?

[Leonidas]

And what part of my software is running on that computer? only EIS and wideFMGS client?

On two of them yes. On the third (EWD-SD) runs MCDU CPT too.

[Irinside]

Thank you Jean Luc, I already lock my frames to 30 fps but they wildly fluctuate between 1 and 29. I am running Win7 64 on Server and clients. Server Has i7 3770 @ 3.7ghz and 16gb ram. All machines have updated windows and the CPU is working below 20% and memory uses less than 3gb. I have no weather or additional program's running. Is there any other test I can run? Philip

[jeehell]

Did you force CPU cores/threads to particular applications?
I really cannot help you much there, I personnaly can run the complete software on one single computer here, which is only a I7 860 @ 2.8GHz...

Check that you're not in full screen mode with FSX, or other things such as FSX window overlapping over two monitors.
Also check the graphics card has the latest drviers...

JL

[startrail]

Hello,

Not sure what you did exactly, but to sum up: you need to get the data from USGS, unzip it, extract the nexessary data using "egpws data extractor", and make sure the files are in the correct folder (EIS\EGPWS data\XX with XX going from 00 to 82, total 27 folders with 251 files inside each of them).
Also, the TER display is not always instantaneous, the ND must load the data which can take up to a couple minutes after ND start.

JL

Hi JL ,

can an I bother you to give me the link to the location of the zip files. Have tried On USGS could not identify. Thanks

Mike