Results 11 to 17 of 17
Thread: Need help with software.
-
12-01-2013, 08:23 PM #11
- Join Date
- Mar 2009
- Location
- boston ma
- Posts
- 86
Re: Need help with software.
ok so did some reading going to attempt a roll back to xp pro just so i can get all of my cards tested and once i have all well and done i will go back to win7 and get myself a usb expansion card. so i my be back to update you soon or i could be making a big mistake! wish me luck and hopefully i will be back on soon.
thanks for the help guys
-
12-02-2013, 12:04 PM #12
- Join Date
- Mar 2009
- Location
- boston ma
- Posts
- 86
Re: Need help with software.
Went to install the xp pro last night and yup that's right couldn't find my cd so I ordered a parallel db25 to usb cable. my question is has anyone successfully used on of these or is a usb expansion card a must have? I am currently in the process of getting another copy of xp pro sp3 while I wait for the cable.
-
12-02-2013, 02:03 PM #13
Re: Need help with software.
I strongly recommend to use a usb expansion card. The use of the parallel port is obsolete and no longer supported by Opencockpits SIOC.
Nico
-
12-02-2013, 02:54 PM #14
- Join Date
- Mar 2009
- Location
- boston ma
- Posts
- 86
Re: Need help with software.
Hello nico I was wondering when you were going to hit this thread you are a legend around here. You were a huge help to me when I first got this going years ago, so thanks again. I know the usb expansion is the way to go I was just trying to get an idea if my cards were still ok (been in storage for a while) before I go ahead and spend the cash on the expansion card. wanted to know if anyone had success with an adapter cable simply to see if the cards still function.
-
12-02-2013, 03:45 PM #15
Re: Need help with software.
I see. Well these cards are very robust; as long as you keep them away from water, they will still work, no problem
-
12-19-2013, 10:25 PM #16
- Join Date
- Mar 2009
- Location
- boston ma
- Posts
- 86
Re: Need help with software.
I have rolled back to xp pro and finally got around to some testing. cards seem to work unfortunatly i cannot get anything to work thru sioc. i can get results using the iocards exe. but nothing thru sioc im sure im missing something but i just can not remember. im running sioc 3.5 seing that i am hooked thru a parrallel port for the time being. does anyone have any suggestions? it may be a config issues but i dont remember enough about it and unfortunatly like nico said before. lpt is out dated but unfortunatly i cannot afford an expansion card at this time. so if anyone is still running old lpt hookup or just remembers a thing or two about the older sioc i would greatly appreciate any help thank you in advance.
Tim
-
12-19-2013, 11:25 PM #17
- Join Date
- Mar 2009
- Location
- boston ma
- Posts
- 86
Re: Need help with software.
eureka!!! i got it to work....thanks to my four year old son. he ran up to me and showed me a drawing he did. he said see dada i put the sign in brackets to make it stand out...it was only then that i realized i left the master card declaration in my config file in brackets which was preventing it from being seen.