OC usb expension and 2nd 3rd MC inputs late in sioc monitor?

[Opencockpits]

Thanks Nico.

[BABA767]

I've a just PIC programmer and a spare PIC16C745...is possible get the last microcontroller firmware V2? will be fine..
kind regard!
V.

[Opencockpits]

Hello people: here is the link to the new code: http://opencockpits.com/index.php/es...09421c25477717
Regards,

[BABA767]

Thaaaaaanks

[Opencockpits]

You are welcome.

[AndyCYXU]

FYI just installing new sioc solved a lot of problems already with inputs not being recognized so that's great! I will be getting the microcontroler later on as well once i fill my cart with some extra stuff to justify the shipping cost lol

Andy

[prinwibowo]

Hello everyone

I'm building my own IOCard. and I wanna interface with SIOC from opencockpit later. I have been learning how to communicate with SIOC server and successed (in log box written "IOCP Client connected" and clients connected label shows counter-up). I think my client connected and ready to communicate each other. but my problem is how to build communication between my own IOCard to SIOC server thru SIOC client I made (replace opencockpit's one). the tutorials discussing on this is hard to find out. any friend tried this, pls share me?

thank you
best regard

[prinwibowo]

Hello everyone

I'm building my own IOCard. and I wanna interface with SIOC from opencockpit later. I have been learning how to communicate with SIOC server and successed (in log box written "IOCP Client connected" and clients connected label shows counter-up). I think my client connected and ready to communicate each other. but my problem is how to build communication between my own IOCard to SIOC server thru SIOC client I made (replace opencockpit's one). the tutorials discussing on this is hard to find out. any friend tried this, pls share me?

thank you
best regard

[kiek]

Hi,
If you want to communicate with the SIOC server you have to use the IOCP protocol.

Regards,
Nico

[prinwibowo]

Hi,
If you want to communicate with the SIOC server you have to use the IOCP protocol.

Regards,
Nico

thank you kiek for your response.

Yes, I made it and worked, I have been learning your site a lot. but what parameters I should send to SIOC server, so my own IOCard (not opencockpit product) can work. and How compiled sioc script can detect the value changing?