A320 FMGS beta 26

[stefangr]

Unfortunately I am still having problems...

- I am having significant lags between moving controls (throttle, flaps) and showing the change on the EWD. Controls are connected to FS PC, EDW is running on client.
- MCDU is not usable right now: It shows up fine, but clicking any button most times does not show any reaction, maybe in 1 of 20 cases I click, the MCDU screen changes accordingly
- On FS-PC the wideFMGS window shows "connected" and "disconnected", changing approx. once per second. From the feeling I get, it shows longer "disconnected" until it shows "connected" again. Maybe this is the reason for all the other problems I am having?
- On the A320 server window none of the displays on the client PC is showing as connected, they are all "Not connected". But in fact they are, because they react on inputs (like throttle etc., but with significant delay).
- From time to time the displays on the client seem to refresh completely, means getting dark and showing up again. This happens approx. once a minute or so.

I have already changed the ports being used by WideFMGS, but this did not help.

Thanks
Stefan

[adonismartinez]

Hi stefangr

What you describe seems more like an intermittent data stream in your network or a firewall interference. I had a similar issue and when I disabled the windows firewall, plus security setting form bla bla bla antivirus things went better and my widefmgs showed everything as connected.

Also maybe your computer may be running low in memory, try running a memory cleaner or remove starting up software, something like combofix may help.

Regards
Adonis

[stefangr]

I have already had several tries with switching off firewall and virus application check without any change, but I will try once more.

In the meantime I have reverted back to B24 which is working without any problems on my system. No delays in display, immediate response, all modules show up as "connected" within the A320 server. At the moment I prefer to work with B24.

Stefan

[AirFan]

Hi JL,

some things for your list

1. I know you limited the radius to show ALL WPTs ... but when in PLAN mode the reference is still the AC not the shown/selected waypoint. That means in Plan mode and far away from the AC no WPTs are shown.

2. since B25 the outputs for both TERR-ON-ND are not working

Regards
Rob

[jeehell]

Hi,

1. Ah yes forgot that detail
2. Which module? FSUIPCmodule or any other hardware module?

JL

[AirFan]

Hi,

I am using FSUIPC 4.823 and your SIOC creator to work with the OC hardware... As you know there you can define upper and lower korry outputs IDs. I still can define it but the outputs dont light up when pressing the button. Thats only for the 2 TERR ON ND korries. It worked well it B24.
I guess , not that important for now

Rob

[jeehell]

Ok I will look at the SIOCmodule why it does no longer work for the TERR ON ND outputs. Thanks

JL

[immaging]

Hi JL.
I'm a new user to Your best soft.

I install the B25 rel. no problem!
But i've 2 question.

1- SD Display - When with shift+E, Fs command open door correctly, but SD Door page not Display the door state ( a320 model are correct)
2- ND display - the Tcas mode not display the Traffic.

I forgot something ?

Best Regards

Daniele

[jeehell]

Hi,

1. I disabled this feature until further notice, because I'm not happy with the way FS handles the door system.
2. TCAS has been temporarily removed as well. I hope to have it again in next major version.

Regards,
JL

[immaging]

Hi JL ,

Tanks For the reply.

Regards

Daniele