Results 1 to 10 of 12
-
02-21-2012, 04:59 PM #1
- Join Date
- Feb 2012
- Location
- Telford, England
- Posts
- 9
New member from Rob Telford, Shropshire. Needing lots of help :-)
Hello
My name is rob, this looks like the very site ive been looking for ! I have been pc flying for a number of years but only recently been looking to up the realism. I have downloaded a progam called Jayco Gauges simple six but after 1 evening wasted i still havent got a clue what to do with it? i really need an idiots guide to setting up a panel on a 2nd screen (I would say a 2nd computer but this looks more mind bending for me)!
Many thanks for your time.
-
02-27-2012, 05:31 AM #2
- Join Date
- Feb 2012
- Location
- Telford, England
- Posts
- 9
Re: New member from Rob Telford, Shropshire. Needing lots of help :-)
Anyone help?
-
02-27-2012, 02:18 PM #3
Re: New member from Rob Telford, Shropshire. Needing lots of help :-)
you should be able to simply plug in another screen if you have another VGA or DVI port on the back of your PC. If you don't you may need to upgrade you PC or i've heard you can use VGA to USB adaptors to add a screen via usb port.
Hope that helps,
-
02-27-2012, 04:54 PM #4
- Join Date
- Feb 2012
- Location
- Telford, England
- Posts
- 9
Re: New member from Rob Telford, Shropshire. Needing lots of help :-)
Thank you for your reply !
yes im fine with all that i built the computer im using and know i have a second vga port on my graphics card. Its the software im having trouble with the gauge programs ive tried, is there a simple progam? one that doesnt require a computer programmer to set up?
cheers again Geremy
rob
-
02-28-2012, 08:18 AM #5
Re: New member from Rob Telford, Shropshire. Needing lots of help :-)
Rob, if you are still having problems, PM me and I will see if I can help.
John
System:
ASUS P5Q SE/R
Intel Q9550 O/C to 3.4 GHz
4 GB 1066 DDR2 RAM
300 GB WD 10,000 RPM Raptor SATA Drive
GeForce 8800 GT 512 KB RAM
Matrox TH2Go with three 19" Sumsung 940 BX
IR Track 4
-
02-28-2012, 08:25 AM #6
- Join Date
- Nov 2008
- Location
- Europe
- Posts
- 1,934
Re: New member from Rob Telford, Shropshire. Needing lots of help :-)
Make sure that you have FSUIPC installed in Flight Simualtor first. The unregistered version will do.
Download: http://www.schiratti.com/dowson.html
Then run 'jayco gauges six pack' after running flight simulator and drag this screen to another monitor and it should work with fs.
AlexGA or the Highway!
-
02-28-2012, 09:25 AM #7
- Join Date
- Aug 2010
- Location
- UK
- Posts
- 35
Re: New member from Rob Telford, Shropshire. Needing lots of help :-)
Hi Rob
I'm just outside Oswestry, if I can be of any help or if you want to come and visit my build then drop me a PM
Alex
-
02-28-2012, 09:54 AM #8
- Join Date
- Nov 2008
- Location
- Shropshire England
- Posts
- 49
Re: New member from Rob Telford, Shropshire. Needing lots of help :-)
Hi Rob
737 build going on here in Telford also!
Where abouts in Telford are you?
-
03-03-2012, 05:36 AM #9
-
03-03-2012, 05:37 AM #10
Beautiful Womans in your town for night
B_34 TOGA takeoff