opencockpits cdu script

[dazchad]

has Anyone got the opencockpits cdu script to work with pmdg 737

[fordgt40]

Your best, and perhaps only bet, is to use the Michael Devlos driver and script etc. To the best of my knowledge no one has been able to write a SIOC script because PMDG refuse to provide a SDK which gives the necessary information on how to access their FMC command table .
Michael provides quite comprehensive instructions in his manual, so perhaps you should try again. This link may also help

http://www.mycockpit.org/forums/show...-B737-released

David

[dazchad]

hi david its not the drivers its the script for the keys. the cdu screen works just the keys don't
daz

[fordgt40]

Daz

The SIOC script is very basic, only a few lines. Suggest you check the instructions again. Does your SIOC screen match the example in the manual and can you see the key presses in the IOCPconsole

David

[dazchad]

Daz

The SIOC script is very basic, only a few lines. Suggest you check the instructions again. Does your SIOC screen match the example in the manual and can you see the key presses in the nsoleIOCPco

David

no we can not see the key presses in IOCPconsole

[fordgt40]

no we can not see the key presses in IOCPconsole

Presumably you can see the variables that were defined in the script, they just do not change when you press a key?

David

[dazchad]

yes spot on i can not see the changes

[fordgt40]

Daz

Having to ask the "simple" questions first
Apologies for another "simple" question - did you change the sioc.ini file to reflect your USBKeys device number?

David

[dazchad]

IOCP_port=8091
IOCP_timeout=4000
Minimized=No
toggle_delay=20
CONFIG_FILE=.\scripts\sioc fmc pmdg.txt

IOCard_disable=No
IOCard_LPT=No

USBStepper=0,0
USBKeys=1,119
USBServos=0,0
USBRelays=0,0
USBDCmotor=0,0
USBAnalogic=0,0

FSUipcdisable=No
FSUipcRefresh=50

IOCPini_delay=3000
IOCPclient0_disable=no
IOCPclient0_host=192.168.16.3
IOCPclient0_port=8090
IOCPclient1_disable=Yes
IOCPclient1_host=localhost
IOCPclient1_port=8099

Sound_disable=yes
Volume=100

Sound=APDis.wav,-1,-1,-1

window =a.txt - Bloc de notas

#1=\B\A
#2=B
#3=C
#4=D
#5=E
#6=F
#7=G
#8=H
#9=I
#10=J
#11=K
#12=L
#13=M
#14=N
#15=O
#16=P
#17=Q
#18=R
#19=S
#20=T
#21=U
#22=V
#23=W
#24=X
#25=Y
#26=Z
#27=1
#28=2
#29=3
#30=4
#31=5
#32=6
#33=7
#34=8
#35=9
#36=0
#37=<
#38=,
#39=.
#40=-
#41=*
#42=+
#43=//
#44=/0
#45=/1
#46=/A
#47=
#48=
#49=
#50=\1\BM\2
#51=\3\1M\2\4
#52=\1\P\2
#53=\3,\4
#54=\3\1E\2\4
#55=\3\1B\2\4
#56=\1B\2
#57=\33\4
#58=\34\4
#59=\35\4
#60=
#61=
#62=
#63=
#64=\3\14\2\4
#65=\3\15\2\4
#66=\3\1,\2\4
#67=\3\10\2\4
#68=\3\13\2\4
#69=\3\1.\2\4
#70=\3\15\2\4
#71=\3\16\2\4
#72=\3\17\2\4
#73=\3\18\2\4
#74=\3\19\2\4
#75=\3\1¡\2\4
#76=
#77=
#78=
#79=
#80=
#81=
#82=
#83=
#84=
#85=
#86=
#87=
#88=<a
#89=\3\11\2\4
#90=\31\4
#91=\3\12\2\4
#92=\32\4
#200=<b

[fordgt40]

Daz

You have not changed the sioc.ini files as outlined in the manual. These lines must be there

IOCP_port=8092
IOCPclient0_disable=No
IOCPclient0_port=8092

David