Results 1 to 10 of 21
Thread: About TCAS in GC
-
01-16-2006, 10:29 AM #1Eddie ArmaosGuest
About TCAS in GC
Sorry, maybe i'm doing something wrong, but i don't have TCAS in my GC in
ND
display.
I run in the FS PC the Fsinn for Vatsim's multiplayer, do i need something
more?
Does anyone else have Fsinn ?
Thanks
Eddie
-
01-16-2006, 10:31 AM #2Enrico SchirattiGuest
Re: About TCAS in GC
Hi,
I do not know what Fsinn is, but if you get TCAS with normal
FS, then it must be a setting in the Vatsim client that has
to be set.
Ciao
Enrico
"Eddie Armaos" wrote in message
news:383724.77021@wb.onvix.com...
> Sorry, maybe i'm doing something wrong, but i don't have
> TCAS in my GC in
> ND
> display.
>
> I run in the FS PC the Fsinn for Vatsim's multiplayer, do
> i need something
> more?
> Does anyone else have Fsinn ?
>
>
> Thanks
>
> Eddie
>
>
>
-
01-16-2006, 10:57 AM #3Thomas RichterGuest
About TCAS in GC
Hi Eddie,
FSInn needs AiBridge, normaly it will install and activate automaticly by
installing FSInn.
In my case I got trobble with AiBridge and PM. Suddenly I lost "NetDir", no
PMSoftware could find NetDir only CDU could write to it.
Removed FSInn / AiBridge and switched back to SquawkBox 3.04. Now all is
working well, also Traffic is working.
Best Regards
Thomas Richter
-
01-16-2006, 11:19 AM #4Enrico SchirattiGuest
Re: About TCAS in GC
> In my case I got trobble with AiBridge and PM. Suddenly I
> lost "NetDir", no
> PMSoftware could find NetDir only CDU could write to it.
How does that manifest itself? I mean, when does the NetDir
get lost?
-
01-16-2006, 12:00 PM #5Thomas RichterGuest
Re: About TCAS in GC
Hi Enrico,
it lost direct on startup. It started with one of the GC433X-software and now
I know with latest update of FSInn.
But I think it has nothing to do with PM-software, because before I removed
FSInn / AiBridge I tried to go back to older GC, down to 428 step by step,
but NetDir was lost for GC (still there and write in from CDU).
Then I found out that FSInn automaticly starts AiBridge when FS2004 is
starting, so that AiBridge is every tim running in background without needing
(not online).
Then I closed AiBridge and in this moment GC showes the correct Data from
Netdir.
Best Regards
Thomas Richter
-
01-16-2006, 05:52 PM #6Brad HellerGuest
Re: About TCAS in GC
Guys,
I've just started running FS.INN because I can't get Squawkbox to work, even
with help from the SB Forums. I run all the PM software and haven't had a
problem.
Enrico, the only issue I have at the moment is that I can't get the EICAS
display show in the display with the Stby's and the EICAS display by itself.
Its just disappeared for some reason? I even disabled the dimming without
any result. The GC & ND displays just work fine.
Kind Regards,
Brad Heller.
-
01-16-2006, 06:09 PM #7Eddie ArmaosGuest
RE: About TCAS in GC
I can confirm that Fsinn automatic starts a AiBridge.exe in main Fs PC. The
truth is that after Fsinn installation when Fs starts auto run also Fsinn
and Aibridge.
I tried to manually run it in GC PC, but with n o success.
I have the latest Fsinn version
With Squawkbox I don't have a problem, I can see TCAS in ND
Thanks
Eddie
-
01-18-2006, 12:54 PM #8Enrico SchirattiGuest
Re: About TCAS in GC
> Then I closed AiBridge and in this moment GC showes the
> correct Data from
> Netdir.
Can it be that something is messing around with our offsets?
What do you get from pmFileCheck in that constellation?
-
01-18-2006, 12:54 PM #9Enrico SchirattiGuest
EICAS Display
> Enrico, the only issue I have at the moment is that I
> can't get the EICAS
> display show in the display with the Stby's and the EICAS
> display by itself.
> Its just disappeared for some reason? I even disabled the
> dimming without
> any result. The GC & ND displays just work fine.
I haven't observed that here, but I have a little problem
with the elecoff offset, I think. Please check with the new
GC in the latest folder, it has a new DLL.
Ciao
Enrico
-
01-19-2006, 05:10 AM #10Thomas RichterGuest
Re: About TCAS in GC
Hi Enrico,
this file was written when I was going back step by step.
The Problems Date was 8.01.2006.
Yesterday I tried a new installation of FSInn for tests (FSInn is better than
SquawkBox), result:
All PM is working without problems, but ND and QuickMap don`t show TCAS when
online.
The different to before was that I start AiBridge, PM is allready started.
I think FSInn is working with "Long Fingers", once yesterday when I started
FSInn it shoot GoFlight-AP half away (Displays OK, Buttons dead).
Sometimes less is more, back to SquawkBox (all OK).
pmFileCheck Build 36
Opening Connections
Local Path: C:\PFD-747\PFD
Checking Computer and User Name
Local Computer Name: P4-PFD-3000
Local User Name: Administrator
FSUIPC/WideFS found!
FSUIPC Version 3.53
WideServer Version 6.51
?Possible WideServer/WideClient Version Mismatch (WideClient Version 0.00)
Flight Simulator Running
Testing Framerate
Avg / Min / Max: 30.6 / 16.8 / 37.7
OK - GC Detected
GC Build 432
FAIL - FMC Not Detected (CDU or MCDU)
FAIL - A/P NOT Detected (MCP or FCU)
Local DLL Files Found:
PFD.dll dated: 08.12.2005 19:14:00
pm.dll dated: 22.12.2005 12:00:19
Checking FS Path
OK - Reported FS Path \\P4-FS-3200\FS2004\
Trying to access FS Path
OK - Read access to FS Path
OK - Read/Write access to FS Path
OK - Read/Write access to FS Path
Wide Server reports:
92641 Connected to computer "P4-EICAS-2400" running WideClient version 6.510
(skt=1290
92672 Connected to computer "AMD-HARDWARE" running WideClient version 6.510
(skt=12920)
92672 Connected to computer "AMD-FMC" running WideClient version 6.510
(skt=12932)
93688 Connected to computer "P4-PFD-3000" running WideClient version 6.510
(skt=1294
670860 Connected to computer "P4-EICAS-2400" running WideClient version
6.510 (skt=12992)
1558047 Connected to computer "P4-EICAS-2400" running WideClient version
6.510 (skt=352)
2016172 Connected to computer "P4-EICAS-2400" running WideClient version
6.510 (skt=13120)
2404266 Connected to computer "P4-PFD-3000" running WideClient version 6.510
(skt=13052)
3140797 Connected to computer "AMD-PHIDGETS" running WideClient version
6.510 (skt=1302
3500110 Connected to computer "P4-EICAS-2400" running WideClient version
6.510 (skt=13124)
3851204 Connected to computer "P4-PFD-3000" running WideClient version 6.510
(skt=372)
Looking for NETDIR from CDU
FAIL - Can't check NETDIR path, CDU/MCDU is not running
> Please run the CDU/MCDU for this test
Checking FSPLANS Path (To Load/Save FS Flightplans)
OK - Read/Write access to FSPLANS Shared Folder
10 File(s) found in FSPLANS, last date is 08.01.2006 21:28:34
Closing Everything
08.01.2006 23:06:34
Things To Do:
* Check Versions of WideClient
If you wish to, please check www.projectmagenta.com/notams.html
Best Regards
Thomas Richter
Similar Threads
-
TCAS on PM
By JWS in forum PM Boeing GCReplies: 5Last Post: 02-17-2008, 03:21 PM -
TCAS on PM
By JWS in forum PM General Q & AReplies: 5Last Post: 02-17-2008, 03:21 PM -
TCAS Switch ?
By eudoniga in forum PM General Q & AReplies: 6Last Post: 09-19-2007, 07:17 AM -
TCAS
By David Rabiner in forum PM General Q & AReplies: 0Last Post: 02-01-2005, 01:45 PM
6yo FACECAST LINK 14year GIRLS FORUM : ( )...
YWM RAR JAILBAIT ZOOM