Results 1 to 4 of 4
Thread: My el cheapo overhead solution
-
04-19-2011, 08:00 AM #1
My el cheapo overhead solution
Hi,
I just wanted to share some pictures of my overhead project :
Attachment 5073
Attachment 5072
As you can probably see, I'm building my cockpit in a Ikea book case.
The overhead is just a piece of perspex with my own drawings of the overhead glued on, but with the annunciators and switches it's very satisfying. The only thing missing is the back lighting, of course.The whole thing hinges at the bottom so it can be easily stowed when not in use.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
No Longer Active thanked for this post
-
04-19-2011, 09:38 AM #2
- Join Date
- May 2006
- Location
- Texas
- Posts
- 614
Re: My el cheapo overhead solution
Very nice.
-
04-19-2011, 01:59 PM #3
- Join Date
- Dec 2009
- Location
- Trieste
- Posts
- 36
Re: My el cheapo overhead solution
Very very nice !!
Can you post some more info where to find the switches, annunciators etc. and which logic for that?
Tnks and regards
Andrew
-
04-19-2011, 02:15 PM #4
Re: My el cheapo overhead solution
Sure, the switches I found on ebay, the annunciators are from Open Cockpits.
The switches are connected to Leo Bodnars BU0836X cards, the annunciators to Phidgets advanced 64 display card. The logic comes from the flyboysshop interface.
Works like a charm.