Results 1 to 8 of 8
-
10-03-2010, 10:08 AM #1
PMDG 737-800... How to turn TCAS on ?
Hi,
This is a problem which exists from the beginning of my PMDG setup.
I followed the manual and I turned the ATC to TA/RA and then pressed TFC on my EFIS module. Still a TCAS OFF sign exists.
Any ideas how to turn my TCAS on ?
Thanks
Nick
-
10-08-2010, 12:16 PM #2
Re: PMDG 737-800... How to turn TCAS on ?
I just realized that the opencockpits transponder switch gives offsets only for STANDBY and CHARLIE... not TA only and TA/RA
I can now turn the TCAS on, only by opening the FS radio panel and click on it.
Is there a way to fix this from the OC module ?
Any advise on that guys ?
-
10-08-2010, 12:21 PM #3
Re: PMDG 737-800... How to turn TCAS on ?
To be more specific, I am talking about the Mode selector button. In the manual OC says:
6. Mode selector :
- With it we can select the operating mode of the transponder :
i. STBY: Transponder does not transmit
ii. ALT RPTG OFF: Transponder does not send altitude information
iii. XPNDR: The transponder is active and also sends altitude information
iv. TA ONLY: Activates traffic warning
v. TA/RA: Activates traffic warning and advises about target resolutions
-
11-28-2010, 06:49 AM #4
- Join Date
- Nov 2010
- Location
- Norfolk
- Posts
- 44
Re: PMDG 737-800... How to turn TCAS on ?
you may have found out already but in case you havn't it's ctrl+shift+z on the PM GC
Andi
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
Nick1150 thanked for this post
-
11-28-2010, 12:12 PM #5
- Join Date
- Feb 2008
- Location
- Italy
- Posts
- 70
Re: PMDG 737-800... How to turn TCAS on ?
Hi Nick,
I have a cockpit based on PMDG 737.
I solved assign a Macro mouse to TARA and STBY for Pmdg panel. Then assigned a Key command to activate this Macro Mouse. After assigned by SIOC , a virtual button for the Rotary of ATC module OC, and finally assign to that Virtual button, multiple Keyborad action.
It's a workaround but it's work and also you can do the TCAS TEST.
I write a little tutorial to do that.
Regards
Arnaldo
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
Nick1150 thanked for this post
-
11-28-2010, 01:41 PM #6
Re: PMDG 737-800... How to turn TCAS on ?
Thanks to both,
Fortunately, I sold my opencockpits modules (not for this reason though) and purchased the CPflight ones. The CPflight do nothave such an issue, so TCAS is not a problem for me anymore.
Nick
-
11-28-2010, 02:24 PM #7
- Join Date
- Feb 2008
- Location
- Italy
- Posts
- 70
Re: PMDG 737-800... How to turn TCAS on ?
Hi Nick
but with the CpFlight one you can switch all the MOde of PMDG ATC? Test, Stby,TA and TARA?
thanks
Arnaldo
-
11-28-2010, 03:26 PM #8
Re: PMDG 737-800... How to turn TCAS on ?
Similar Threads
-
Turn rate
By renegade in forum General Builder Questions All Aircraft TypesReplies: 1Last Post: 10-10-2009, 02:35 AM -
Pushback + L/R turn
By GDR in forum FSX Scenery DiscussionReplies: 8Last Post: 04-18-2009, 05:45 PM -
Getting Avionics to turn OFF
By Tomlin in forum PM and FSReplies: 7Last Post: 06-10-2008, 08:50 AM -
Standard Rate Turn
By David Rabiner in forum PM General Q & AReplies: 4Last Post: 03-17-2006, 12:31 AM -
I can't turn on a LED
By christianeme in forum FS2Phidget UsersReplies: 5Last Post: 10-06-2005, 09:51 AM