Results 1 to 4 of 4
Thread: PoKeys confuses me :(
-
02-03-2015, 08:51 AM #1
- Join Date
- Dec 2014
- Location
- United Kingdom
- Posts
- 12
PoKeys confuses me :(
Apologies..as I posted this in the wrong section
Hi All...started to build a cockpit..and bought the poKeys 56...downloaded the software etc..tried to wade through the manual..but jeez....I can't fathom it out at all!
I wired up a simple On/Off switch onto it (should be relatively easy?)...opened up the software....and got utterly befuddled!
Surely, if all the thing needs to do, is make an On/Off switch work... I must be as thick as a brick. It's easy enough to do on a Joystick or yoke.
I assume it's designed for much more complex jobs than an On/Off switch...but would be so nice to just be able to get even one damn switch working
Are there any easier cards to use?
-
02-03-2015, 08:02 PM #2
Re: PoKeys confuses me :(
If you're just looking to wire up switches and buttons why not try out the Leo Bodnar BU0836A board?
You may find this easier to work with.
-
02-03-2015, 08:56 PM #3
- Join Date
- Dec 2014
- Location
- United Kingdom
- Posts
- 12
Re: PoKeys confuses me :(
Now that looks a bit more like it!...thanks Geremy
-
02-08-2015, 03:26 PM #4
- Join Date
- Dec 2014
- Location
- United Kingdom
- Posts
- 12
Re: PoKeys confuses me :(
Finally got this card working...don't know why I bothered to download the manual though..it's worse than useless. Full of utterly irrelevant specs..and little else
Hi...realize this has been a long time, but I'm heading down the path of building my own 777...
B777 Overhead Panel Design