Rudder Trim

[Martin Cumming]

I have the FDS Rudder trim which use phidgets. Is there a Rudder trim on the market that operates using different solfware or even USB.

I have no understanding of phidgets and have been trying for over a year to get this up and running..........

[Melnato]

Martin,

The Rudder Trim is Very easy to configure. SCos and I have given you all the files and configs to make it
fool proof. What exactly is going wrong or not happening?

It works with 4.3.15 also, which you have...did you try that version?

Nat

[Martin Cumming]

Hi

Yes I tried that one but the interface is not as Steve Wecarchuk's diagram which fds supplied. He uses 4.3.8. For example there is no button to "configure". The instructions therefore have no relevance. I need 4.3.8. I did have this originally but the problem then was that the status of the servo was always red - when SC tried his end he came up with the same problem.............

Martin

[Melnato]

Martin,

There is a configure button near the top left of all the "4" series FS2Phidgets programs.
My guess is you have a mismatch between the FS2Ph version and the phidgets.msi driver.

The FDS Trim Panel wil work with all the "4" series FS2Ph. let me know which version you have now.
I have tested with all versions up to 4.3.15, but I have 4.3.8 If you really want it.

Nat

[Martin Cumming]

Thanks for your hedlp. I have tried to re-install but now gert a message saying "download latest msi ". I'm not sure what this is nor where to find it.....

[Melnato]

OK,
Had a feeling it would be the Phidgets MSI.
Please email me on link below which version you installed so I can
send you the right MSI

Nat