Hi everyone,

I am having trouble with the software in question.

My FSX radios are ALWAYS set to 118.00, even though I have disabled the relavent sections in the IOCModules.ini file.

This is the file:

Code:
[ fichero de configuracion para IOCModules 1.6 ]
[ Configuration file for IOCModules 1.6 ]

[ Arranque minimizado en la barra ]
[ Start minimized in tray ] 
Minimized=Yes

[ X-plane mode Yes or No]
Xplane=No

[ FACTOR Trim]
TRIM_factor=250

[ FLAPS Maximum degree // Máximos grados]
MFLAPS=40

[ Retractable GEAR // Tren retractil]
RTREN=Yes

[ Reverse position ON-OFF // invertir posicion de los interruptores
Reverse_SW=yes


[ Reverse position ON-OFF backlit //  invertir posicion del interruptor de retroiluminacion
[ Only for simulator, not Real panel // Solo para el simulador, no para el panel real ]
Reverse_panel=no

[ IP del HOST del servidor ]
[ IOCP server host name ]
IOCP_host=localhost

[ Puerto de envio del protocolo IOCP ]
[ IOCP port ]
IOCP_port=8090

[ Tiempo de respuesta máximo de los paquetes IOCP ]
[ IOCP Timeout ]
IOCP_timeout=4000

[Brillo por defecto 1-121]
[Bright 1-121]
bright=121

[ Valores iniciales ]
[ Initial values ]

//set_com1=118000
//set_com2=118000
//set_nav1=10800
//set_nav2=10800
//set_adf1=1000
//set_adf2=1000
set_atc=1200

[ Activacion de Radios ]
[ Radio Activation ]

//active_com1=No
//active_com2=No
//active_nav1=No
//active_nav2=No
//active_adf1=No
//active_adf2=No
active_atc=Yes

[ Orden para COM , NAV y ADF]
[ COM , NAV % ADF modules order ]
[ Change to NO for device number minor assigned to COM2 , NAV2 or ADF2, if YES, minor device number is COM1 , NAV1 or ADF1]
FIRST_DEVICE_COM1=Yes
FIRST_DEVICE_NAV1=Yes
FIRST_DEVICE_ADF1=Yes
FIRST_DEVICE_RMP1=Yes

[Emulación de test]
Emulate_test=yes
Any ideas?

Jack