Results 1 to 4 of 4
Thread: Engravity CDU refresh problems
-
02-15-2009, 05:44 PM #1
- Join Date
- Feb 2009
- Location
- Switzerland
- Posts
- 8
Engravity CDU refresh problems
Hi folks !
I'm new on that forum - building a 737NG cockpit since four years now. I just received the CDU hardware from Engravity and I'm currently performing some tests.
I use project magenta on a networked configuration with FS9. The CDU software is running on a dedicated machine and doing fine when used with the LCD display connected on that computer.
Here the problem: when toggling between some pages, the Engravity CDU is unable to refresh correctly what lies below the "dashed" line - especially for the RTE and HOLD pages. It looks like a communication problem between project magenta sofware and Engravity hardware.
Did anybody experience the same situation ?
Thanks in advance for your support,
Stéphane
-
02-17-2009, 08:20 PM #2
- Join Date
- Feb 2009
- Location
- Switzerland
- Posts
- 8
================
PROBLEM IS SOLVED !
================
here is what I did - this may help others having the same difficulties:
1/ Motherboard drivers update - especially USB
2/ BIOS update (latest version)
3/ BIOS configuration (enable ACPI/USB buffers and ACPI/S3 handling)
The refresh rate is improved and the lower part of the display is now consistent with the software representation.
I hope it helps anybody ...
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Dislikes
-
04-04-2009, 10:53 AM #3
- Join Date
- Feb 2005
- Location
- Hamburg / Germany
- Posts
- 174
I have problems with my RCDU (FO) on the ACARS page!
It does not show the whole weather informaton.
On the main CDU I have no problems ...
Can some one pls check it before I write to PM?
Thanks
JanVisit my project on Facebook and become a fan www.facebook.de/homecockpit
-
04-05-2009, 04:56 AM #4
- Join Date
- Feb 2005
- Location
- Hamburg / Germany
- Posts
- 174
and on the APPROACH Page (RCDU)
--> on the Flap / Speed lines
the FLAP numbers (25 30 40) are missing, but the speed numbers are visible.
Very strange ... can pls some one check?Visit my project on Facebook and become a fan www.facebook.de/homecockpit
Similar Threads
-
Engravity 737 CDU
By Joe Cygan in forum General Builder Questions All Aircraft TypesReplies: 8Last Post: 09-14-2010, 07:10 PM -
Engravity CDU/FMS/FMC??
By Fuglsang in forum Computer Hardware SetupReplies: 10Last Post: 02-06-2009, 02:42 AM -
Potential buyer: VNAV problems, A/P problems?
By 737aqua in forum PM General Q & AReplies: 13Last Post: 04-26-2008, 09:21 PM -
Re: +- key and engravity CDU
By Enrico Schiratti in forum PM General Q & AReplies: 0Last Post: 04-13-2006, 10:53 AM
Beautiful Womans in your town for night
B_34 TOGA takeoff