Dimensions of the landing gear leaver for homemade

[spaceweather]

Hi all,

did someone knows asource for the demensions of that landig gear leaver:

http://www.opencockpits.com/catalog/...6.html?image=1

I wanna try to build at on my own, between 130-190 Euros is to much...

Greetings and tnx in advance,

Andy

[airbus319]

i've got one in the post mate, will gladly send you the dimentions when it arrives, I'm fingers and toes crossed for delivery tomorrow but who knows with the uk's royal mail

[spaceweather]

i've got one in the post mate, will gladly send you the dimentions when it arrives, I'm fingers and toes crossed for delivery tomorrow but who knows with the uk's royal mail

Fine i`ll waiting for your infos! Simply sent them via e-Mail to
dl6yeh<@>t-online.de

Thanks!

[Westozy]

Hi Andy,

Here is a simple design that I've made before a few times...


Regards,

Gwyn

[Jackpilot]

Mine is from a Vendor and very nice
Lever sticks out of the panel about 4 "
wheel is 1 1/2" diameter
Trigger is 2 3/4" back from wheel center
Lever is 3/4 diam tube.

Gwyn's Design is certainly the easiest I have seen. Goforit!
Merry Xmas

[Bob Reed]

That is my lever. Thanks Gwyn! It is awsome. Can not wait to get it in the cockpit... Whenever that might be.

[airbus319]

That lever of Gwynn's is huge, it extends all the way from madagascar to australia lol.

I'm sad to say that my lever hasnt turned up in the post

Merry xmas and a happy holidays to you all.

Dave.

[k1932k]

Real measurements from the 737-300 (anyway I guess all the 737):

lenght from the Mip to the wheel = 150 mm
diameter of the tube = 24 mm
lenght of the final part of the tube (the one that bring s the wheel)= 45 mm
wheel diameter = 35 mm
wheel thickness= 20 mm

I;ve just finished my own. It looks great! I made the lock override but it is inop, just for real feeling and look as well.. it has three positions: up, down and off (central) it is controlled with two microswitches and an interface card (BU0836) and FSUIPC.