Strange problem on MCDU and lost sidestick/rudder control after takeoff

Hi, JL,

Last day I complete the flight, and close all computer without any problem.

And today I start the system, and set the FPln in MCDU for a new flight, and I got the screen with error message, please check attached image.

First time I see it, never happen before. And I did not change anything/setup after last day. Just power on the computer and start the system.

And another issue is, at ground all control is ok, sidestick, rudder, flaps, spoiler..... and speed up at rwy, and rotate, OK!

But after rotate, takeoff and climb, I lost all control immediately, all of them, and I noticed that the Clock's number, also stop. (I install clock, SD, EWD with the computer running FMGS server.)

last day all is ok, and today I start computer and have these problems happen.

Can't figure out why.

Andrew

Hi,

exact same problem here... also ATC page does not show and get the error Msg "ATSU DATALINK ATC DATA COMPANY"
Did four flights yesterday without problems.

Any idea?

Many thanks
Micha

Same problem here. Is something date sensitive I wonder.
Barry

Hello everyone,

First I wish you an happy new year, I hope you spent some good time with family and friends for the end of year celebrations.


There is however an URGENT matter with a year 2020 bug as many of you realsized already. From today, your sim most probably is unusable. You need to download 4 files from here:
https://1drv.ms/u/s!AgqinWqhYcTFj8UR...40mSw?e=EfUwzH
And you put the 4 files everywhere you encounter adacalc.dll or adacalcfs.dll which is in the following folders at least:
- FMGS Server
- EIS
- EGPWS
- Navdata


The problem is from a magnetic variation mathematical model which became obsolete today, and it did not have a failproof mechanism if used after that limit date....


Best regards
JL

And if you rebuilt the navdata while thinking it was the issue, then it got corrupted so you need to rebuild the navdata again!

Quote:

---

Originally Posted by jeehell

And if you rebuilt the navdata while thinking it was the issue, then it got corrupted so you need to rebuild the navdata again!

---

Try and works.
Thanks JL.

And...... the newest 2001 AIRAC remove the data of VHHX - Kaitak...... so sad......

Andrew

happy new year to all and thanks jeehell for the quick response, it worked !!

Thanks JL,
Hope you had a great time with your family as well.
Regards
les

Quote:

---

Originally Posted by BlueBlood

Try and works.Thanks JL.And...... the newest 2001 AIRAC remove the data of VHHX - Kaitak...... so sad......Andrew

---

Navigraph 2001 & latest 2002 build have VHHX installed

Hi..i've put all 4 files to - FMGS Server - EIS - Navdata but failed to load OVHD "OVHD failed to load Adacalc.dll"