Help with the beta PMSystem 744
Hello,
Some time ago I received from Enrico the beta PMSystem 744 .txt
Nevertheless their is a good interaction between the PMsystem and the lower
EICAS synoptics, I'm unable to start the engines.
I also note that when switches the lights on or off, NO interaction comes
from the FS aircraft.
When I pull the start switches, nothing happens at all, no upcoming N1 or
N2.
With the same situation, this is not the case when I use the PMsystem B737.
Then I'm able to start the engines and there is interaction when I switch on
or off the lights.
In the PMsystem.ini I changed the SYSTEM=PMSYS747 parameter. No other
parameters are set somewhere regarding PMSystems.
Is there something else I have to do, to let the system know that I'm using
the 744 logics.
According Filechecker all connections/patchs are ok - also to FS.
PMsystems is running of course on a client machine fully connected to the
network - pmsounds/ pmweather are working normally on that client.
Looking for tips
Michel
--
Michel VANDAELE
Member of the board FSCB
EBOS2002 Designteam
My B744 simulator project
http://users.pandora.be/michel.vandaele/sim1.htm
Re: Help with the beta PMSystem 744
Hi
I successfuly used 747 system for the testing. Althought not all functions
work, but all engine starting are working.
Please make sure that all apu and engine bleeds are open, and bleed
isolations are closed.
Leon
"Michel Vandaele" wrote in message
news:290239.57741@wb.onvix.com...
> Hello,
>
> Some time ago I received from Enrico the beta PMSystem 744 .txt
> Nevertheless their is a good interaction between the PMsystem and the
lower
>
> EICAS synoptics, I'm unable to start the engines.
> I also note that when switches the lights on or off, NO interaction comes
> from the FS aircraft.
> When I pull the start switches, nothing happens at all, no upcoming N1
or
>
> N2.
>
> With the same situation, this is not the case when I use the PMsystem
B737.
>
> Then I'm able to start the engines and there is interaction when I switch
on
>
> or off the lights.
>
> In the PMsystem.ini I changed the SYSTEM=PMSYS747 parameter. No other
> parameters are set somewhere regarding PMSystems.
>
> Is there something else I have to do, to let the system know that I'm
using
>
> the 744 logics.
>
> According Filechecker all connections/patchs are ok - also to FS.
>
> PMsystems is running of course on a client machine fully connected to the
> network - pmsounds/ pmweather are working normally on that client.
>
> Looking for tips
>
> Michel
>
>
> --
> Michel VANDAELE
> Member of the board FSCB
> EBOS2002 Designteam
> My B744 simulator project
> http://users.pandora.be/michel.vandaele/sim1.htm
>
Re: Help with the beta PMSystem 744
Hi Leon,
Many thanks for your message.
Strange it isn't working then with me. I'm familiar with the start
procedure, as I'm a PS1 user too.
Can you confirm that your FS Aircraft model is reacting when switching on
the lights ? As with me also no reaction.
Ciao
Michel
> Hi
> I successfuly used 747 system for the testing. Althought not all
functions
> work, but all engine starting are working.
> Please make sure that all apu and engine bleeds are open, and bleed
> isolations are closed.
>
> Leon
>
>
> "Michel Vandaele" wrote in message
> news:290239.57741@wb.onvix.com...
>> Hello,
>>
>> Some time ago I received from Enrico the beta PMSystem 744 .txt
>> Nevertheless their is a good interaction between the PMsystem and the
> lower
>>
>> EICAS synoptics, I'm unable to start the engines.
>> I also note that when switches the lights on or off, NO interaction
comes
>> from the FS aircraft.
>> When I pull the start switches, nothing happens at all, no upcoming
N1
> or
>>
>> N2.
>>
>> With the same situation, this is not the case when I use the PMsystem
> B737.
>>
>> Then I'm able to start the engines and there is interaction when I
switch
> on
>>
>> or off the lights.
>>
>> In the PMsystem.ini I changed the SYSTEM=PMSYS747 parameter. No
other
>> parameters are set somewhere regarding PMSystems.
>>
>> Is there something else I have to do, to let the system know that I'm
> using
>>
>> the 744 logics.
>>
>> According Filechecker all connections/patchs are ok - also to FS.
>>
>> PMsystems is running of course on a client machine fully connected to
the
>> network - pmsounds/ pmweather are working normally on that client.
>>
>> Looking for tips
>>
>> Michel
>>
>>
>> --
>> Michel VANDAELE
>> Member of the board FSCB
>> EBOS2002 Designteam
>> My B744 simulator project
>> http://users.pandora.be/michel.vandaele/sim1.htm
>>
>
Re: Help with the beta PMSystem 744
You welcome.
No, lights do not work.
The air conditions either.
I am using Plasma control for the interaction with my overhead panel.
But I also managed to start engines with the mouse also.
Leon
"Michel Vandaele" wrote in message
news:290879.57741@wb.onvix.com...
> Hi Leon,
> Many thanks for your message.
> Strange it isn't working then with me. I'm familiar with the start
> procedure, as I'm a PS1 user too.
> Can you confirm that your FS Aircraft model is reacting when switching on
> the lights ? As with me also no reaction.
> Ciao
>
> Michel
>
>
> > Hi
> > I successfuly used 747 system for the testing. Althought not all
> functions
> > work, but all engine starting are working.
> > Please make sure that all apu and engine bleeds are open, and bleed
> > isolations are closed.
> >
> > Leon
> >
> >
> > "Michel Vandaele" wrote in message
> > news:290239.57741@wb.onvix.com...
> >> Hello,
> >>
> >> Some time ago I received from Enrico the beta PMSystem 744 .txt
> >> Nevertheless their is a good interaction between the PMsystem and the
> > lower
> >>
> >> EICAS synoptics, I'm unable to start the engines.
> >> I also note that when switches the lights on or off, NO interaction
> comes
> >> from the FS aircraft.
> >> When I pull the start switches, nothing happens at all, no upcoming
> N1
> > or
> >>
> >> N2.
> >>
> >> With the same situation, this is not the case when I use the PMsystem
> > B737.
> >>
> >> Then I'm able to start the engines and there is interaction when I
> switch
> > on
> >>
> >> or off the lights.
> >>
> >> In the PMsystem.ini I changed the SYSTEM=PMSYS747 parameter. No
> other
> >> parameters are set somewhere regarding PMSystems.
> >>
> >> Is there something else I have to do, to let the system know that I'm
> > using
> >>
> >> the 744 logics.
> >>
> >> According Filechecker all connections/patchs are ok - also to FS.
> >>
> >> PMsystems is running of course on a client machine fully connected to
> the
> >> network - pmsounds/ pmweather are working normally on that client.
> >>
> >> Looking for tips
> >>
> >> Michel
> >>
> >>
> >> --
> >> Michel VANDAELE
> >> Member of the board FSCB
> >> EBOS2002 Designteam
> >> My B744 simulator project
> >> http://users.pandora.be/michel.vandaele/sim1.htm
> >>
> >
>
Re: Help with the beta PMSystem 744
Thanks Leon,
So in fact the only interaction with FS is the engine start. No other
controls actions are posible to see if it works.?
Btw what is Plasma control ?
At the moment my overhead isn't yet connected, so I'm using the mouse to
start the engines, but as I said no luck
Ciao
Michel
"Leon Portman" wrote in message
news:290880.57741@wb.onvix.com...
> You welcome.
>
> No, lights do not work.
> The air conditions either.
> I am using Plasma control for the interaction with my overhead panel.
> But I also managed to start engines with the mouse also.
>
> Leon
>
> "Michel Vandaele" wrote in message
> news:290879.57741@wb.onvix.com...
>> Hi Leon,
>> Many thanks for your message.
>> Strange it isn't working then with me. I'm familiar with the start
>> procedure, as I'm a PS1 user too.
>> Can you confirm that your FS Aircraft model is reacting when switching
on
>> the lights ? As with me also no reaction.
>> Ciao
>>
>> Michel
>>
>>
>> > Hi
>> > I successfuly used 747 system for the testing. Althought not all
>> functions
>> > work, but all engine starting are working.
>> > Please make sure that all apu and engine bleeds are open, and bleed
>> > isolations are closed.
>> >
>> > Leon
>> >
>> >
>> > "Michel Vandaele" wrote in message
>> > news:290239.57741@wb.onvix.com...
>> >> Hello,
>> >>
>> >> Some time ago I received from Enrico the beta PMSystem 744 .txt
>> >> Nevertheless their is a good interaction between the PMsystem and
the
>> > lower
>> >>
>> >> EICAS synoptics, I'm unable to start the engines.
>> >> I also note that when switches the lights on or off, NO interaction
>> comes
>> >> from the FS aircraft.
>> >> When I pull the start switches, nothing happens at all, no
upcoming
>> N1
>> > or
>> >>
>> >> N2.
>> >>
>> >> With the same situation, this is not the case when I use the PMsystem
>> > B737.
>> >>
>> >> Then I'm able to start the engines and there is interaction when I
>> switch
>> > on
>> >>
>> >> or off the lights.
>> >>
>> >> In the PMsystem.ini I changed the SYSTEM=PMSYS747 parameter. No
>> other
>> >> parameters are set somewhere regarding PMSystems.
>> >>
>> >> Is there something else I have to do, to let the system know that I'm
>> > using
>> >>
>> >> the 744 logics.
>> >>
>> >> According Filechecker all connections/patchs are ok - also to FS.
>> >>
>> >> PMsystems is running of course on a client machine fully connected to
>> the
>> >> network - pmsounds/ pmweather are working normally on that client.
>> >>
>> >> Looking for tips
>> >>
>> >> Michel
>> >>
>> >>
>> >> --
>> >> Michel VANDAELE
>> >> Member of the board FSCB
>> >> EBOS2002 Designteam
>> >> My B744 simulator project
>> >> http://users.pandora.be/michel.vandaele/sim1.htm
>> >>
>> >
>>
>
