Hi JL,
some reporting about B52:
- I can confirm the mentioned cabin pressure issue on ground with packs on: Safety Valve Open
- Lateral offset is displayed in plan mode and alinged in current heading... so the lateral offset label is also up side down or i.e 90deg rotated depending on current heading
- Also saw wrong display of the flap position in EIS1... EIS2 is fine.
- Did a full reinstall of B52. With some hardware modules included during install... after that the FMGS_config.exe cant be closed correctly. Saving works but clicking on the upper right cross causes a crash. When closed via task manager I get an "Invalid pointer operation". Also reinstalled B50.2 to check... no issue there. Reproducable in B52.
-TERONND requires change of ND mode to be turned off on display.
-General question: When reducing the Thrust manually on the levers in ATHR on: ATHR limited pops up. Correct. But once you clear it keeps poping up again and again... is that the real behaviour? Shouldnt be one popup enough after you cleared the ECAM?
Many thanks for the awesome work!
Rob