-
Recall Panel on B737NG
Hello fellow builders,
I'm currently working on the Master Caut switch and recall panel on my B737NG glareshield. I use PMSystems and I want to simulate the annunciation of warnings via the sixpack using PMSystems.
On the real aircraft the recall panel is also a large "button" which you can push to recall any warnings via the annunciators. Now I think PMSystems will (if not already) allow simulation of the recall function on the sixpack.
My question is...if anybody has done it can they tell me whether they use a momentary switch for the recall panel or do they use a simple single throw single pole switch?????
I know this is probably dependent on how it is coded in the PMSystems logic for the recall panel but it looks to me that a STSP switch is a more logical choice. I couldn't tell which to use as the logic for this in the B737 logic file in PMSystems appears to be incomplete.
Look forward to hearing from you
Cheers,
Luke
-
Hello Luke, haven't yet try with hardware wired but in pmsys737.lgc file we can read :
if recallswitch then
sixpackfltcontdisp = 0
sixpackelecdisp = 0
sixpackhyddisp = 0
sixpackapudisp = 0
sixpackfiredisp = 0
sixpackengdisp = 0
sixpackantiicedisp = 0
sixpackdoorsdisp = 0
sixpackfueldisp = 0
else
sixpackfltcontdisp = sixpackfltcont
sixpackelecdisp = sixpackelec
sixpackhyddisp = sixpackhyd
sixpackapudisp = sixpackapu
sixpackfiredisp = sixpackfire
sixpackengdisp = sixpackeng
sixpackantiicedisp = sixpackantiice
sixpackdoorsdisp = sixpackdoors
sixpackfueldisp = sixpackfuel
endif
56F8 .1 RecallSwitch : offset for Recallswitch in sysvar file,
so I think it's ok to use a momentary push button linked to offset 56F8 ( bit n° 1 ). When you push the recall button, all annonciators turn off, then when you release it, some annonciators tuen on, depends of systems conditions, as in real.
-
Yes it works with a momentary push button, i have done with my setup and works perfect, here are two pic links.
http://www.abcfamily.com.br/project7...d/DSC01548.JPG
http://www.abcfamily.com.br/project7...d/DSC01539.JPG
Hope that helps ,
Carlos
-
I haven't wired mine up yet but when I built the sixpack panel backer I placed it on a momentary push switch so to do a recal you would push the faceplate of the sixpack. I trimmed out enough room around the sixpack to allow it to freely move back and forth in the glareshield. I thought this would be more realistic. Here are real crappy pictures but should help. (Better pilot than photographer)
Normal postion
http://www.digitaldoubts.com/ForumPics/1.jpg
Pushing for recal. It doesn't sink in much but the switch works and is spring loaded to push panel back out.
http://www.digitaldoubts.com/ForumPics/2.jpg
-
Thank you for all your replies (including images!) to this post.
The way is clear for me now and it seems the way to go is with a momentary switch.
Lyle your set up on the glareshield looks great :cool: and that is exactly what I propose to do. Thanks for the images.
Cheers,
Luke