Master BATT and Master Avionics confusion
Hi guys
Im not entirely sure if this is correct (hence my posting here) but I believe that the PMRJ has two different variable/functions in the PMRJ software backwards.
This issue has bugged me ever since I purchased and installed the PMRJ software, and I believe that I have now figured out what may be happening.
Scenario:
Press the switch that is interfaced as "Master Batt" and nothing comes up on the Display Units (DUs) and then press on the "Avionics Master" and the DUs come alive. If you turn OFF the Master Batt switch, the DUs remain ON, yet you lose the avionics Nav and Comm reception.
However, if you watch the LJ45 instrument panel, upone pressing ON the Master Battery, the Display Units come alive and when pressing ON the Avionics Master, the actual Nav and Comm info appears. This is exactly opposite of the PMRJ's reaction to these two offsets.
Obviously because the interface is controlling the instrument panel in the software correctly but the PMRJ seems to behaive opposite, I wonder if it's coded backwards to where it brings up the wrong info when the correct offset is sent. In other words,
the offset for Master Battery is coded to bring up the Avionics in PMRJ and...
the offset for Avionics Master is coded to bring up the Batteries.
This is evidenced by the fact that it works opposite and in the logical order in the panel on the screen (dekstop panel).
Thoughts?
