For PM team

Hi
The people of Opencockpits find a bug in the set-clear bit function an have
resolve it in version 091b.I have create a file name PMsyt in the aircraft
folder and copied in the 737-400 default,adding after the 737-800 air and
cfg from PMDG.
For my surprised all works fine and smooth,except for the YAW DAMPER switch
and the spar-eng valve annunciators ,and the transfer bus annunciators.(
they are WORD,so I understand probably is my configuration fault).
All other past issues are solved,incluiding the BATT1 off -overhead dark.
Will check again WORD offsetes and feedback you,but it seems all is working
now.

Talk soon
Tom

Hi Tomas,

> For my surprised all works fine and smooth,except for the YAW DAMPER
> switch
> and the spar-eng valve annunciators ,and the transfer bus annunciators.(
> they are WORD,so I understand probably is my configuration fault).

What is not working with that?

Ciao

Enrico

Hi Enrico
Yaw works only with FS default panel ,but no with any other panel ( PM 737
panel has no YAW),that right and I can understand.
ENG-SPAR valve and transfer bus annunciators works find if I configure
hardware 1=off 0= ON,just opposit as it should be,but in this case when
starting from a dark configuration they start lighted.If I changing
configuration just opposite,they start off,but then they do not follow the
logic and at the end they remain always light.


Tom
"Enrico Schiratti" escribió en el mensaje
news:272151.53551@wb.onvix.com...
> Hi Tomas,
>
> > For my surprised all works fine and smooth,except for the YAW DAMPER
> > switch
> > and the spar-eng valve annunciators ,and the transfer bus
annunciators.(
> > they are WORD,so I understand probably is my configuration fault).
>
> What is not working with that?
>
> Ciao
>
> Enrico
>