Request for Boeing GC 767 varient

Hi PM team,

I am building a 767 sim using FDS signiture MIP panels and the full PM Boeing GC. After much research and looking around for ideas to solve a gague problem, it came to me that the solution could be found in the PM software. I need a brake preassure gauge. The gauge is to the left of the primary airspeed indicator on the FDS panels. It is too small to be made using simkit or similar gauges. Its a very simple gauge to make in terms of content. I wonder is this possible.

Regards

James

http://img453.imageshack.us/img453/4...0483fw3.th.jpg

Hello, maybe FLIGHTILLUSION can help here.

http://www.flightillusion.com/

They have gauges which are even user adaptable.
B. Rgds
Michel

Hi James,you might have to just make a "dummy"version of the brake gage.Thats what I plan on doing.I dont think anyone right now has anything that small of a gage.-Dan

Flight Illusion has a Boeing Brake Pressure guage http://www.flightillusion.com/GSA28.htm

You will have to open the existing hole in the MIP to accept it,from a very small hole to a very medium size hole,if you could shrink the graphics on the gauge itself,might work out.

The problem I have is the LCD runs in that direction. I cant go further right with the LCD as it would interfere with the Flight illusion standby gauges. Its a 22" LCD. Ill post some pics later.

I dont think any of the working gauges could shrink that small. I emailed PM support. I have to sort the ASA gauge now. I think a backlit image should do the trick.

Thanks for the help.

James

James,are you using FSCONV?if so you should have no problem with the ASA,I would think.I am basically using the same idea,having that backlite somehow...